{"title":"RFID","description":"","products":[{"product_id":"pl4-dev-10406","title":"RFID Evaluation Shield - 13.56MHz","description":"\u003cp\u003eThis board is an evaluation platform for the SM130 RFID module. It includes an XBee header, PCB trace antenna, and has the layout to be used as a shield for an Arduino. There is a small prototyping area as well. This board can also be used as an antenna to the SM130 RFID module. Be sure to check the schematic for information on the connections.\u003c\/p\u003e\n\n \u003cp\u003eThe XBee header is designed to be used with the [XBee Explorer Regulated](http:\/\/www.sparkfun.com\/products\/9132) board.\u003c\/p\u003e\n\n \u003cp\u003eThis board comes populated with the switches, resistors and LEDs, but does not include the RFID module, XBee, headers, or Arduino board.\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Schematic](http:\/\/cdn.sparkfun.com\/datasheets\/Dev\/Arduino\/Shields\/RFID_Eval_13.56MHz-v14.pdf)\u003cbr\u003e\n* [Eagle Files](http:\/\/cdn.sparkfun.com\/datasheets\/Dev\/Arduino\/Shields\/RFID_Eval_13.56MHz-v14.zip)\u003cbr\u003e\n* [Datasheet](http:\/\/www.sparkfun.com\/products\/10126) (SM130)\u003cbr\u003e\n* [Example Code](https:\/\/github.com\/sparkfun\/RFID_Evaluation_Shield)\u003cbr\u003e\n* [Additional Downloads](http:\/\/www.sonmicro.com\/en\/index.php?option=com_content\u0026amp;view=article\u0026amp;id=61\u0026amp;Itemid=74)\u003cbr\u003e\n* [GitHub](https:\/\/github.com\/sparkfun\/RFID_Evaluation_Shield\/tree\/V_1.4)\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":39690070425781,"sku":"PL4-DEV-10406","price":41.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/10406-01.jpg?v=1618121297"},{"product_id":"pl4-kit-13198","title":"RFID Starter Kit","description":"\u003cp\u003eThis it the SparkFun RFID Starter Kit, an all-in-one kit that offer everything you need to get your next RFID project off the ground. This kit includes our USB RFID Reader, ID-12LA RFID module, and two 125kHz RFID cards. We've done away with the annoying clamshell and now offer this in the same type of box as the rest of our kits.\u003c\/p\u003e\n\n \u003cp\u003eThe RFID USB Reader is a simple to use, USB to serial base unit for the ID-3LA, ID-12LA, and ID-20LA readers. Simply plug a reader into the headers and attach a miniUSB cable. Open a terminal program of your choice at 9600bps 8N1, then scan your 125kHz ID tag and the unique ID will be shown on the screen. The unit is based on a FTDI chip and comes with a read LED and buzzer.\u003c\/p\u003e\n\n \u003cp\u003eThe ID-12LA is a very simple RFID reader module. It plugs directly into the USB reader to allow you to read RFID tags through a USB connection. Power the module, hold up a card, and get a serial string output containing the unique ID of the card.\u003cbr\u003e\n \u003cbr\u003e\n***\u003c\/p\u003e\n\n\u003cp\u003eNeed a custom board? This component can be found in SparkFun's à La Carte board builder. You can have a custom design fabricated with this component - and your choice of hundreds of other sensors, actuators and wireless devices - delivered to you in just a few weeks.\u003c\/p\u003e\n\n\n\n    \n\n\n\n\n\u003cp\u003e**Includes:**\u003c\/p\u003e\n\n\u003cp\u003e* 1x [RFID USB Reader](http:\/\/www.sparkfun.com\/products\/9963)\u003cbr\u003e\n* 1x [ID-12LA RFID Module](https:\/\/www.sparkfun.com\/products\/11827)\u003cbr\u003e\n* 2x [RFID Card - 125kHz](https:\/\/www.sparkfun.com\/products\/8310)\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Schematic](http:\/\/www.sparkfun.com\/datasheets\/Sensors\/ID\/RFID_USB_Reader-v14.pdf) (RFID USB Reader)\u003cbr\u003e\n* [Eagle Files](http:\/\/www.sparkfun.com\/datasheets\/Sensors\/ID\/RFID_USB_Reader-v14Eagl.zip) (RFID USB Reader)\u003cbr\u003e\n* [Hookup Guide](https:\/\/learn.sparkfun.com\/tutorials\/sparkfun-rfid-starter-kit-hookup-guide)\u003cbr\u003e\n* [Datasheet](https:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/ID\/ID-2LA,%20ID-12LA,%20ID-20LA2013-4-10.pdf) (ID-12LA)\u003cbr\u003e\n* [USB FTDI Drivers for Linux, MAC, and PC](http:\/\/www.ftdichip.com\/FTDrivers.htm)\u003c\/p\u003e\n\n\u003cp\u003e**Videos**\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":39690097328309,"sku":"PL4-KIT-13198","price":112.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/13198-02.jpg?v=1618121610"},{"product_id":"pl4-kit-15209","title":"RFID Qwiic Kit","description":"\u003cp\u003eThe SparkFun RFID Qwiic Kit is a simple, yet all-in-one I2C based RFID starting point for the ID-3LA, ID-12LA, and ID-20LA readers. Simply plug a reader into the headers and use a Qwiic cable to connect to any Qwiic enabled development board, then scan your 125kHz ID tag and the unique 32-bit ID will be shown on the screen. This kit comes with everything you need to get started. The SparkFun RFID Qwiic Reader, an ID-12LA reader, a couple of RFID cards, and a cable to get you hooked up. Just plug this into any Qwiic enabled development board and you are good to go.\u003c\/p\u003e\n\n\u003cp\u003eUtilizing the onboard ATtiny84A, the Qwiic RFID takes the six byte ID tag of your 125kHz RFID card, attaches a time stamp to it, and puts it onto a stack that holds up to 20 unique RFID scans at a time. This information is easy to get at with some simple I2C commands. The unit comes with a read LED and buzzer, but don't worry, there is a jumper you can cut to disable the buzzer if you want.\u003c\/p\u003e\n\n\u003cp\u003e***\u003c\/p\u003e\n\n\u003cp\u003e*The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you cant hook it up wrong.*\u003c\/p\u003e\n\n\u003cp\u003e***\u003c\/p\u003e\n\n\n\u003cp\u003e-\u0026gt;\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":39690101457077,"sku":"PL4-KIT-15209","price":97.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/15209-SparkFun_RFID_Qwiic_Kit-01a.jpg?v=1618121657"},{"product_id":"pl4-kit-16464","title":"Ultra-Small UHF RFID Tag Rain - 10 Pack","description":"\u003cp\u003eThe 'Rain' ultra-small UHF RFID tags from Murata are really exciting because of their fantastically small size -- they're just a 1.25 mm square with a height of 0.55 mm! The tag's tiny composure makes it really well suited to attaching to small or organically-shaped objects with a little bit of glue or epoxy. So what can you do with a small RFID tag? Strapping one to the tip of a Nerf dart to tell if you've hit the target or sounding the alarm if someone removes a trinket from your desk is just the tip of the iceberg.\u003c\/p\u003e\n\n\u003cp\u003eThese tags operate in the UHF (865MHz to 928MHz) band and contains a 96-bit EPC field that is programmable by the user. Using a reader like the [M6E Nano](https:\/\/www.sparkfun.com\/products\/14066) with the [UHF Ring Antenna](https:\/\/www.sparkfun.com\/products\/15113) will allow you to read\/write multiple tags at a range of up to an inch!\u003c\/p\u003e\n\n\u003cp\u003eTo recap, these tags are great for tiny close-range identification, just be sure not to misplace them or you might never find them again!\u003c\/p\u003e\n\n\u003cp\u003e**Includes:**\u003c\/p\u003e\n\n\u003cp\u003e* 10x UHF RFID Tags\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* 1.25 mm square by 0.5 mm height\u003cbr\u003e\n* 96-bit user-programmable EPC field\u003cbr\u003e\n* UHF band (865 - 928 MHz)\u003cbr\u003e\n* Simultaneous read capable with compatible readers (like [M6E Nano](https:\/\/www.sparkfun.com\/products\/14066))\u003cbr\u003e\n* 1 inch read\/write range with [UHF Ring Antenna](https:\/\/www.sparkfun.com\/products\/15113)\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Datasheet](https:\/\/cdn.sparkfun.com\/assets\/6\/b\/9\/c\/9\/UHF_MAGICSTRAP_LXMSJZNCMF_198_datasheet_171012Rev1_1.pdf)\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690105290933,"sku":"PL4-KIT-16464","price":59.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/15116-Ultra-small_UHF_RFID_Tag_Rain_-_10_Pack-01.jpg?v=1618121697"},{"product_id":"pl4-sen-09963","title":"RFID USB Reader","description":"\u003cp\u003eThe SparkFun RFID USB Reader is a simple to use, USB to serial base unit for the ID-3LA, ID-12LA, and ID-20LA readers. Simply plug a reader into the headers and attach a miniUSB cable. Open a terminal program of your choice at 9600bps 8N1, then scan your 125kHz ID tag and the unique 32-bit ID will be shown on the screen. The unit is based on a FTDI chip and comes with a read LED and buzzer.\u003c\/p\u003e\n\n \u003cp\u003eThis new revision uses SMD headers for the RFID module, and has a solder jumper which allows you to disable or enable the buzzer.\u003c\/p\u003e  \n\n\u003cp\u003e**Note:** This product does not come with the RFID reader. Check below for compatible readers.\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* 1.4x1.2x0.57\"\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Schematic](http:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/ID\/RFID_USB_Reader-v18.pdf)\u003cbr\u003e\n* [Eagle Files](http:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/ID\/RFID_USB_Reader-v18.zip)\u003cbr\u003e\n* [Tutorial](https:\/\/learn.sparkfun.com\/tutorials\/sparkfun-rfid-starter-kit-hookup-guide)\u003cbr\u003e\n* [USB FTDI Drivers for Linux, MAC, and PC](http:\/\/www.ftdichip.com\/FTDrivers.htm)\u003cbr\u003e\n* [GitHub](https:\/\/github.com\/sparkfun\/RFID_USB_Reader\/tree\/V_1.8)\u003c\/p\u003e\n\n\u003cp\u003e**Videos**\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":39690148675765,"sku":"PL4-SEN-09963","price":60.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/09963-01.jpg?v=1618122137"},{"product_id":"pl4-sen-11827","title":"RFID Reader ID-12LA (125 kHz)","description":"\u003cp\u003eRFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects. This is the ID-12LA, a very simple to use RFID reader module from ID Innovations. With a built in antenna, the only holdup is the 2mm pin spacing. Power the module, hold up a 125kHz card, and get a serial string output containing the unique ID of the card.\u003c\/p\u003e\n\n\u003cp\u003e**Note:** The new ID-12LA is essentially the same as the ID-12, but has a lower voltage input.\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* 2.8 - 5V supply\u003cbr\u003e\n* 125kHz read frequency\u003cbr\u003e\n* EM4001 64-bit RFID tag compatible\u003cbr\u003e\n* 9600bps TTL and RS232 output\u003cbr\u003e\n* Magnetic stripe emulation output\u003cbr\u003e\n* 120mm read range\u003cbr\u003e\n* 25x26mm\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Datasheet](https:\/\/cdn.sparkfun.com\/assets\/9\/3\/0\/5\/2\/DS-11827-RFID_Reader_ID-12LA__125_kHz_.pdf)\u003cbr\u003e\n* [mbed RFID Twitter project](http:\/\/mbed.org\/blog\/entry\/Example-Internet-of-Things-RFID-Tweeter2\/)\u003cbr\u003e\n* [mbed Example](http:\/\/mbed.org\/cookbook\/ID12-RFID-Reader)\u003cbr\u003e\n* [Hookup Guide](https:\/\/learn.sparkfun.com\/tutorials\/sparkfun-rfid-starter-kit-hookup-guide)\u003c\/p\u003e\n\n\u003cp\u003e**Videos**\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690153787573,"sku":"PL4-SEN-11827","price":62.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/11827-01.jpg?v=1618122169"},{"product_id":"pl4-sen-11828","title":"RFID Reader ID-20LA (125 kHz)","description":"\u003cp\u003eRFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects. This is the ID-20LA, a very simple to use RFID reader module from ID Innovations. With a built in antenna, the only holdup is the 2mm pin spacing. Power the module, hold up a 125kHz card, and get a serial string output containing the unique ID of the card.\u003c\/p\u003e\n\n\u003cp\u003e**Note:** The new ID-20LA is essentially the same as the older ID-20, but has a lower input voltage.\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* 2.8 - 5V supply\u003cbr\u003e\n* 125kHz read frequency\u003cbr\u003e\n* EM4001 64-bit RFID tag compatible\u003cbr\u003e\n* 9600bps TTL and RS232 output\u003cbr\u003e\n* Magnetic stripe emulation output\u003cbr\u003e\n* Read range of 180mm\u003cbr\u003e\n* 38x40x7mm\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Datasheet](https:\/\/cdn.sparkfun.com\/assets\/c\/7\/0\/e\/3\/DS-11828-RFID_Reader_ID-20LA__125_kHz_.pdf)\u003cbr\u003e\n* [Hookup Guide](https:\/\/learn.sparkfun.com\/tutorials\/sparkfun-rfid-starter-kit-hookup-guide)\u003c\/p\u003e\n\n\u003cp\u003e**Videos**\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690153984181,"sku":"PL4-SEN-11828","price":82.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/11828-01.jpg?v=1618122171"},{"product_id":"pl4-sen-11862","title":"RFID Reader ID-3LA (125 kHz)","description":"\u003cp\u003eRFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects. This is the ID-3LA, a very simple to use RFID reader module from ID Innovations. The only holdups are the 2mm pin spacing and you will need an external antenna. Power the module, hold up a 125kHz card, and get a serial string output containing the unique ID of the card.\u003c\/p\u003e\n\n\u003cp\u003e**Note:** The new ID-3LA is essentially the same as the ID-2, but has a lower voltage input.\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* 2.8~5V supply\u003cbr\u003e\n* 125kHz read frequency\u003cbr\u003e\n* EM4001 64-bit RFID tag compatible\u003cbr\u003e\n* 9600bps TTL and RS232 output\u003cbr\u003e\n* Magnetic stripe emulation output\u003cbr\u003e\n* 19x21mm\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Datasheet](http:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/ID\/ID-3LA.pdf)\u003c\/p\u003e\n\n\u003cp\u003e**Videos**\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690154049717,"sku":"PL4-SEN-11862","price":61.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/11862-01.jpg?v=1618122173"},{"product_id":"pl4-sen-14066","title":"Simultaneous RFID Reader - M6E Nano","description":"\u003cp\u003eThe SparkFun Simultaneous RFID Reader is an Arduino-compatible board to get you started with the M6E Nano UHF RFID Reader. Radio Frequency Identification (RFID) is becoming popular everywhere for tracking practically everything.  Whether you want to get started by adding an RFID reader on your toolbox with tags on all your tools or allowing access to the tree house for your secret society meetings, this board may be for you!\u003c\/p\u003e\n\n\u003cp\u003eWith the Arduino shield footprint, you can connect this directly to an Arduino-compatible board, or a different microcontroller.  You can also connect directly to your computer using the FTDI header on the board and read data using the Universal Reader Assistant.\u003c\/p\u003e\n\n\u003cp\u003eOnce you've started, this board will read EPCglobal Gen 2 tags (see Recommended Products) at up to 150 tags per second.  Writing of tags is also possible at 80msec standard write.  The board has adjustable power output from 0dBm to 27dBm, meaning that with the correct antenna you can read up to 16 feet (4.9m), or 1 to 2 feet with the onboard antenna.\u003c\/p\u003e\n\n\u003cp\u003e**Note:** Your reader ships with a piece of gray, nonconductive Thermal Gap Filler to help with both heat dissipation and to cover the exposed ground plane (to prevent circuits from shorting against it).\u003c\/p\u003e\n\n\u003cp\u003eWarning: Ensure that personnel do not stand in the radiation beam of the antenna unless they are more than 21cm away from the face of the antenna (to adhere to FCC limits for long-term exposure). See Datasheet for more information.\u003c\/p\u003e\n\n\u003cp\u003e***\u003c\/p\u003e\n\n\u003cp\u003eNeed a custom board? This component can be found in SparkFun's à La Carte board builder. You can have a custom design fabricated with this component - and your choice of hundreds of other sensors, actuators and wireless devices - delivered to you in just a few weeks.\u003c\/p\u003e\n\n\n\n    \n\n\n\n\n\u003cp\u003e***\u003c\/p\u003e\n\n\u003cp\u003e-\u0026gt;\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":39690158145717,"sku":"PL4-SEN-14066","price":352.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/14066-SparkFun_Simultaneous_RFID_Reader_-_M6E_Nano-01b.jpg?v=1618122229"},{"product_id":"pl4-sen-15191","title":"RFID Qwiic Reader","description":"\u003cp\u003eThe SparkFun RFID Qwiic Reader is a simple I2C based RFID breakout board for the ID-3LA, ID-12LA, and ID-20LA readers. Simply plug a reader into the headers and use a Qwiic cable, then scan your 125kHz ID tag and the unique 32-bit ID will be shown on the screen. The unit comes with a read LED and buzzer, but don't worry, there is a jumper you can cut to disable the buzzer if you want. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1\"-spaced pins in case you prefer to use a breadboard.\u003c\/p\u003e\n\n\u003cp\u003eUtilizing the onboard ATtiny84A, the Qwiic RFID takes the six byte ID tag of your 125kHz RFID card, attaches a time stamp to it, and puts it onto a stack that holds up to 20 unique RFID scans at a time. This information is easy to get at with some simple I2C commands.\u003c\/p\u003e \n\n\u003cp\u003e**NOTE:** The I2C address of the RFID Reader is 0x7D and is jumper selectable to 0x7C (software-configurable to any address). A multiplexer\/Mux is required to communicate to multiple SHTC3 sensors on a single bus. If you need to use more than one RFID Reader sensor consider using the [Qwiic Mux Breakout](https:\/\/www.sparkfun.com\/products\/16784).\u003c\/p\u003e\n\n\u003cp\u003e***\u003c\/p\u003e\n\n\u003cp\u003e*The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you cant hook it up wrong.*\u003c\/p\u003e\n\n\u003cp\u003e***\u003c\/p\u003e\n\n\u003cp\u003e**Note:** This product does not come with the RFID reader. Check below for compatible readers.\u003c\/p\u003e\n\n\u003cp\u003e-\u0026gt;\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":39690165584053,"sku":"PL4-SEN-15191","price":65.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/15191-SparkFun_RFID_Qwiic_Reader-01a.jpg?v=1618122284"},{"product_id":"pl4-sen-16887","title":"RFID Module - M6E-NANO","description":"\u003cp\u003eThe M6E-Nano RFID Module delivers a small form factor embedded UHF RFID option with very low power consumption and is ideal for battery operated, low cost, small form-factor portable readers. The M6E-Nanos wide RF output range (0 dBm to +27 dBm) is important for the read\/write requirements for RFID-enabled printers and tag commissioning stations.\u003c\/p\u003e \n\n\u003cp\u003eThis module features a surface mount package designed for the efficiency of SMT manufacturing, driving down the total cost for embedding RFID in volume applications, including handheld devices, consumables authentication, device configuration and access control.\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* Dimensions 22x26x3.0mm\u003cbr\u003e\n* RFID Protocol: EPCglobal Gen 2 (ISO 18000-6C)\u003cbr\u003e\n* DC Voltage:\u003cbr\u003e\n - 3.3 to 5.5 V for +25 dBm out\u003cbr\u003e\n - 3.7 to 5.5 V for +27 dBm out\u003cbr\u003e\n* DC power consumption when reading:\u003cbr\u003e\n - 3.2 W @ 5 VDC for +27 dBm out\u003cbr\u003e\n - 2.9 W @ 5 VDC for +25 dBm out\u003cbr\u003e\n - 1.5 W @ 5 VDC for 0 dBm out\u003cbr\u003e\n* Operating Temperature: -20C to +60C\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Datasheet](https:\/\/cdn.sparkfun.com\/assets\/f\/8\/a\/8\/5\/DS-16887-RFID_Module_M6E-NANO.PDF)\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690169909429,"sku":"PL4-SEN-16887","price":226.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/16887-M_E-NANO_RFID_Module-01.jpg?v=1618122332"},{"product_id":"pl4-wrl-14131","title":"UHF RFID Antenna (RP-TNC)","description":"\u003cp\u003eThis is your solution when you absolutely, positively need to get the most out of an antenna for your next RFID project. This ultra high-frequency (UHF) RFID Antenna boasts a frequency range of 860-960 MHz with a gain of 6dBi. This is the same external antenna we use for our [Simultaneous RFID Reader](https:\/\/www.sparkfun.com\/products\/14066) due to its high-quality features.\u003c\/p\u003e \n\n\u003cp\u003eEach UHF RFID Antenna has a 30cm cable terminated with an RP-TNC female connector. If you need to extend the cable attached to the antenna, we offer [additional cords](https:\/\/www.sparkfun.com\/products\/14132) to help you out!\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* Frequency Range: 860-960 MHz\u003cbr\u003e\n* Gain: 6 dBi\u003cbr\u003e\n* VSWR: \u0026lt; 1.6 : 1\u003cbr\u003e\n* Impedance: 50Ω\u003cbr\u003e\n* Polarization: Linear Vertical\u003cbr\u003e\n* Antenna Connector: TNC Female RP\u003cbr\u003e\n* Max Power: 100W\u003cbr\u003e\n* 223mm x 200mm x 60mm\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Datasheet](https:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/ID\/GSM-34-900-58-30CM-1814.pdf)\u003cbr\u003e\n* [RFID Basics](https:\/\/learn.sparkfun.com\/tutorials\/rfid-basics)\u003cbr\u003e\n* [Simultaneous RFID Tag Reader Guide](https:\/\/learn.sparkfun.com\/tutorials\/simultaneous-rfid-tag-reader-hookup-guide\/using-an-external-antenna)\u003c\/p\u003e\n\n\u003cp\u003e**Videos**\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690191896757,"sku":"PL4-WRL-14131","price":84.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/14131-02a.jpg?v=1618122499"},{"product_id":"pl4-com-14325","title":"RFID Tag (125kHz)","description":"\u003cp\u003eYou might know RFID as the technology that Big Brother uses to *track your every move*. Quickly, don the [tinfoil hats](https:\/\/en.wikipedia.org\/wiki\/Tin_foil_hat)!!\u003c\/p\u003e\n\n\u003cp\u003eOnly kidding. RFID is useful for sensing and identifying tagged people and objects for access control, automation and a whole range of different applications. This basic RFID tag works in the 125kHz RF range and comes with a unique 40-bit ID. It is not reprogrammable.\u003c\/p\u003e \n\n\u003cp\u003eThis blank, smooth, mildly flexible RFID tag is ready for your logo (or hand-drawn scribble).\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* EM4001 ISO-based RFID IC\u003cbr\u003e\n* 125kHz Carrier\u003cbr\u003e\n* 2kbps ASK\u003cbr\u003e\n* Manchester encoding\u003cbr\u003e\n* 40-bit unique ID\u003cbr\u003e\n* 64-bit data stream [Header+ID+Data+Parity]\u003cbr\u003e\n* 2.13 x 3.35 x 0.03\" (54 x 85.5 x 0.8mm)\u003c\/p\u003e\n\n\u003cp\u003e**Videos**\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39705409847477,"sku":"PL4-COM-14325","price":8.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/14325-01.jpg?v=1618237162"},{"product_id":"pl4-sen-09416","title":"RFID Glass Capsule (125kHz)","description":"\u003cp\u003eThis is a glass, cylindrical RFID tag; it's very similar to those [implanted into pets](http:\/\/en.wikipedia.org\/wiki\/Pet_chip) for identification purposes. But really guys, it's not for use inside your body. **Please don't implant this thing into yourselves.** Each tag comes with a unique 32-bit ID code and is not reprogrammable. The carrier frequency of this tag is 125kHz, so it works great with our ID-3LA, ID-12LA and ID-20LA RFID readers.\u003c\/p\u003e  \n\n \u003cp\u003eWe tested this RFID tag with one of our ID-12LA readers and measured a maximum read distance of about 10mm.\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* Tiny RFID tag\u003cbr\u003e\n* 32-bit unique ID - non-reprogrammable\u003cbr\u003e\n* 125kHz read frequency\u003cbr\u003e\n* EM4001 ISO based RFID IC\u003cbr\u003e\n* Manchester encoding* Width: 12.25mm\u003cbr\u003e\n* Diameter: 1.93mm\u003c\/p\u003e\n\n\u003cp\u003e**Videos**\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39739989557429,"sku":"PL4-SEN-09416","price":23.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/09416-02.jpg?v=1618430353"},{"product_id":"pl4-sen-09417","title":"RFID Button - 16mm (125kHz)","description":"\u003cp\u003eThis is a simple, thumbnail-size RFID tag. These tags are great for sensing presence, identification, etc., and they're small, so they can be easily sewn into clothing or inserted into enclosures. Each tag comes with a unique 32-bit ID code and is not reprogrammable. The carrier frequency of this tag is 125kHz, so it works great with our ID-2, ID-12 and ID-20 RFID readers.\u003c\/p\u003e  \n\n \u003cp\u003eWe tested this RFID tag with one of our ID-12 readers and measured a maximum read distance of about 32mm.\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* 32-bit unique ID - non-reprogrammable\u003cbr\u003e\n* 125kHz read frequency\u003cbr\u003e\n* EM4001 ISO based RFID IC\u003cbr\u003e\n* Manchester encoding \u003cbr\u003e\n* Diameter: 16mm\u003cbr\u003e\n* Thickness: 1.85mm\u003c\/p\u003e\n\n\u003cp\u003e**Videos**\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39739990048949,"sku":"PL4-SEN-09417","price":17.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/09417-02.jpg?v=1618430355"},{"product_id":"pl4-sen-10127","title":"RFID Tag - ABS Token MIFARE Classic 1K (13.56 MHz)","description":"\u003cp\u003eThis is a basic RFID tag that functions within the MIFARE Classic® 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device. Check the related products below.\u003c\/p\u003e\n\n \u003cp\u003eThis tag has a diameter of 30mm with a 5mm hole in the center and an overall thickness of 2.25mm. It works with MIFARE® 13.56 MHz compatible readers.\u003c\/p\u003e\n\n \u003cp\u003eThe MIFARE Classic® card is fundamentally just a memory storage device, where the memory is divided into segments and blocks with simple security mechanisms for access control. They are ASIC based and have limited computational power. Thanks to their reliability and low cost, these tags are widely used for electronic wallet, access control, corporate ID cards, transportation or stadium ticketing.\u003c\/p\u003e\n\n \u003cp\u003eThese tags are NFC capable!\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [MIFARE®](http:\/\/en.wikipedia.org\/wiki\/Mifare) (Wikipedia)\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39739991097525,"sku":"PL4-SEN-10127","price":13.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/10127-01.jpg?v=1618430360"},{"product_id":"pl4-sen-10128","title":"RFID Tag - Transparent MIFARE Classic 1K (13.56 MHz)","description":"\u003cp\u003eThis is a basic RFID tag that functions within the MIFARE Classic® 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device. Check the related products below.\u003c\/p\u003e\n\n \u003cp\u003eThis tag is transparent and has a diameter of 25mm and an overall thickness of about 0.7mm. It works with MIFARE® 13.56 MHz compatible readers.\u003c\/p\u003e\n\n \u003cp\u003eThe MIFARE Classic® card is fundamentally just a memory storage device, where the memory is divided into segments and blocks with simple security mechanisms for access control. They are ASIC based and have limited computational power. Thanks to their reliability and low cost, these tags are widely used for electronic wallet, access control, corporate ID cards, transportation or stadium ticketing.\u003c\/p\u003e\n\n \u003cp\u003eThese tags are NFC capable!\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [MIFARE®](http:\/\/en.wikipedia.org\/wiki\/Mifare) (Wikipedia)\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39739991425205,"sku":"PL4-SEN-10128","price":14.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/10128-01.jpg?v=1618430362"},{"product_id":"pl4-sen-11319","title":"RFID Tag - Adhesive MIFARE Classic 1K (13.56 MHz)","description":"\u003cp\u003eThis is a basic RFID tag that functions within the MIFARE Classic® 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device. Check the related products below.\u003c\/p\u003e\n\n \u003cp\u003eThis tag has an adhesive backing and a diameter of 30mm with an overall thickness of 0.4mm. It works with MIFARE® 13.56 MHz compatible readers.\u003c\/p\u003e\n\n \u003cp\u003eThe MIFARE Classic® card is fundamentally just a memory storage device, where the memory is divided into segments and blocks with simple security mechanisms for access control. They are ASIC based and have limited computational power. Thanks to their reliability and low cost, these tags are widely used for electronic wallet, access control, corporate ID cards, transportation or stadium ticketing.\u003c\/p\u003e\n\n \u003cp\u003eThese tags are NFC capable!\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [MIFARE®](http:\/\/en.wikipedia.org\/wiki\/Mifare) (Wikipedia)\u003c\/p\u003e\n\n\u003cp\u003e**Videos**\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39739993718965,"sku":"PL4-SEN-11319","price":14.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/11319-03a.jpg?v=1618430370"},{"product_id":"pl4-sen-13030","title":"RFID Reader Breakout","description":"\u003cp\u003eThis is a simple breakout board for our RFID readers. The SparkFun RFID Reader Breakout converts the 2mm pins to bread board friendly 0.1\" headers. With this ability the ID-3LA, ID-12LA, and the ID-20LA you can solder the reader directly to the breakout board or use the 2mm sockets.\u003c\/p\u003e  \n\n\u003cp\u003eThis breakout board's edges actually fit flush within the under side the ID-12LA. The board also works with the ID-20LA, but is smaller than the edges. As stated before each pin of the RFID reader has been broken out including: VCC, READ, D0, D1, FORM, TIR, CP, both ANTs, RES, and GND. We've even added four half-mounting holes to the board to easily secure your project!\u003c\/p\u003e\n\n\u003cp\u003e**Note:** If you are concerned about soldering this board directly to the RFID reader, you can use [2mm sockets](https:\/\/www.sparkfun.com\/products\/8272) instead. This is due to the RFID being sensitive to heat and should be handled with care or if you would like to switch the readers out as you please.\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Schematic](https:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/ID\/RFID_Breakout_v2.pdf)\u003cbr\u003e\n* [Eagle Files](https:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/ID\/RFID_Breakout_v2.zip)\u003cbr\u003e\n* [Using the RFID Reader Breakout](https:\/\/learn.sparkfun.com\/tutorials\/sparkfun-rfid-starter-kit-hookup-guide#using-the-rfid-reader-breakout)\u003cbr\u003e\n* [GitHub](https:\/\/github.com\/sparkfun\/RFID_Reader_Breakout\/tree\/v20) (Design Files)\u003cbr\u003e\n* [Product Video](https:\/\/www.sparkfun.com\/videos#all\/7M0JsesGwmM\/81)\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":39739995193525,"sku":"PL4-SEN-13030","price":9.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/13030-01.jpg?v=1618430378"},{"product_id":"pl4-wrl-14147","title":"UHF RFID Tag (Set of 5)","description":"\u003cp\u003eEver wanted to play with those newfangled RFID tags? Although it's been around for a while, the technology has been extremely cost-prohibitive and difficult to implement without being an RF engineer. This affordable product opens the door for using RFID in your own projects!\u003c\/p\u003e \n\n\u003cp\u003eThese paper-thin EPCglobal Gen2 tags work with our Simultaneous RFID reader.  The tags can read and be written to --- and also have a kill feature.  Each tag comes with a TID (Truly Unique ID) that can't be changed, but there's plenty of memory for you to write and read from.\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* EPCglobal Gen2 and ISO\/IEC 18000-6c\u003cbr\u003e\n* 800 Bits of Memory\u003cbr\u003e\n* 512 User Bits\u003cbr\u003e\n* 64-Bit Unique TID (unalterable serial number)\u003cbr\u003e\n* 32-Bit Access and 32-Bit Kill Passwords* Width: 1cm\u003cbr\u003e\n* Length: 7cm\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39740030976181,"sku":"PL4-WRL-14147","price":9.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/14147-01.jpg?v=1618430499"},{"product_id":"pl4-wrl-14151","title":"UHF RFID Tag - Adhesive (Set of 5)","description":"\u003cp\u003eEver wanted to play with those newfangled RFID tags? Although it's been around for a while, the technology has been extremely cost-prohibitive and difficult to implement without being an RF engineer. This affordable product opens the door for using RFID in your own projects!\u003c\/p\u003e \n\n\u003cp\u003eThese paper-thin, adhesive EPCglobal Gen2 tags work with our Simultaneous RFID reader and can be stuck to practically anything you can imagine.  The tags can read and be written to --- and also have a kill feature.  Each tag comes with a TID (Truly Unique ID) that can't be changed, but there's plenty of memory for you to write and read from.\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* EPCglobal Gen2 and ISO\/IEC 18000-6c\u003cbr\u003e\n* 800 Bits of Memory\u003cbr\u003e\n* 512 User Bits\u003cbr\u003e\n* 64-Bit Unique TID (unalterable serial number)\u003cbr\u003e\n* 32-Bit Access and 32-Bit Kill Passwords* Width: 2.35cm\u003cbr\u003e\n* Length: 9.67cm\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39740031664309,"sku":"PL4-WRL-14151","price":9.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/14151-01.jpg?v=1618430501"}],"url":"https:\/\/getcahits.com\/zh\/collections\/rfid.oembed","provider":"PuriLite","version":"1.0","type":"link"}