{"title":"Receivers","description":"","products":[{"product_id":"pl4-gps-08975","title":"GPS Receiver - LS20031 5Hz (66 Channel)","description":"\u003cp\u003eThe LS20031 GPS receiver is a complete GPS smart antenna receiver, that includes an embedded antenna and GPS receiver circuits. This low-cost unit outputs an astounding amount of position information 5 times a second. The receiver is based on the proven technology found in LOCOSYS 66 channel GPS SMD type receivers that use MediaTek chip solution.\u003c\/p\u003e  \n\n \u003cp\u003eThe GPS smart antenna will track up to 66 satellites at a time while providing fast time-to-first-fix, one-second navigation update and low power consumption. It can provide you with superior sensitivity and performace even in urban canyon and dense foliage environments. The capabilities meet the sensitivity requirements of car navigation as a well as other location-based applications.\u003cbr\u003e\n \u003cbr\u003e\n Not sure which GPS module is right for you? Check out our [GPS Buying Guide](https:\/\/www.sparkfun.com\/pages\/GPS_Guide)!\u003c\/p\u003e\n\n\u003cp\u003e**Note:** The datasheet for this unit states that the update rate is configurable up to 10Hz but we've found that it is most reliable at the default rate of 5Hz.\u003c\/p\u003e\n\n\u003cp\u003e**Note:** The new version of this module uses the MT3339 MTK chipset.\u003c\/p\u003e  \n\n\u003cp\u003e**Note:** Unit does not contain a connector, however there are 5 bare pads you can solder to. Check out our [tutorial](http:\/\/www.sparkfun.com\/commerce\/tutorial_info.php?tutorials_id=176) on how to solder a right-angle 5-pin header to the pads. It's easier than you might think.\u003c\/p\u003e\n\n\u003cp\u003e**Note:** Hacking makes the world go 'round, but be careful if you decide to flash some 3rd party firmware to this module because we *cannot* get the original for you. If 3rd party firmware breaks your device, according to the manufacturer, you're on your own!\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* MediaTek MT3339 solution\u003cbr\u003e\n* 5Hz output\u003cbr\u003e\n* 57600bps TTL serial interface\u003cbr\u003e\n* 3.3V @ 41mA\u003cbr\u003e\n* 66 Channel GPS\u003cbr\u003e\n* Fast TTFF at low signal level\u003cbr\u003e\n* Up to 10Hz update rate\u003cbr\u003e\n* Capable of SBAS (WAAS, EGNOS, MSAS)\u003cbr\u003e\n* Built-in micro battery to preserve system data for rapid satellite acquisition\u003cbr\u003e\n* LED indicator for fix or no fix\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Datasheet](https:\/\/cdn.sparkfun.com\/datasheets\/GPS\/LS20030~3_datasheet_v1.3.pdf)\u003cbr\u003e\n* [PMTK Protocol Reference](http:\/\/www.sparkfun.com\/datasheets\/GPS\/Modules\/PMTK_Protocol.pdf)\u003cbr\u003e\n* Great configuration software: [Mini GPS](http:\/\/www.sparkfun.com\/datasheets\/GPS\/MiniGPS_1.32.zip)\u003cbr\u003e\n* [Example Configuration](http:\/\/diydrones.com\/profiles\/blogs\/using-the-5hz-locosys-gps-with) from DIYDrones\u003cbr\u003e\n* [Connection Tutorial](http:\/\/www.sparkfun.com\/commerce\/tutorial_info.php?tutorials_id=176)\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690091102389,"sku":"PL4-GPS-08975","price":164.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/08975-00.jpg?v=1618121537"},{"product_id":"pl4-gps-12751","title":"GPS Receiver - EM-506 (48 Channel)","description":"\u003cp\u003eThe EM-506 GPS receiver from [USGlobalSat](http:\/\/www.usglobalsat.com) based on the spectacular SiRF StarIII chipset. This complete module is built upon the same technology as the ET-301, but includes on-board voltage regulation, LED status indicator, battery backed RAM, and a built-in patch antenna! 6-pin interface cable included.\u003c\/p\u003e\n\n \u003cp\u003eThis EM-506 GPS module is powered by SiRF Star IV, it can provide you with superior sensitivity and performance even in urban canyon and dense foliage environment. With SiRF CGEE (Client Generated Extended Ephemeris) technology, it predicts satellite positions for up to 3 days and delivers CGEE-start time of less than 15 seconds under most conditions, without any network assistance. \u003cbr\u003e\n \u003cbr\u003e\n Not sure which GPS module is right for you? Check out our [GPS Buying Guide](https:\/\/www.sparkfun.com\/pages\/GPS_Guide)!\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* 48-Channel Receiver\u003cbr\u003e\n* Extremely high sensitivity : -163dBm\u003cbr\u003e\n* 2.5m Positional Accuracy\u003cbr\u003e\n* Hot Start : 1s\u003cbr\u003e\n* Warm Start : 35s \/ 15s with CGEE\u003cbr\u003e\n* Cold Start : 35s \/ 15s with CGEE\u003cbr\u003e\n* 45-55mA at 4.5-6.5V* 30mm x 30mm x 10.7mm\u003cbr\u003e\n* 16g including cable\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Datasheet](http:\/\/cdn.sparkfun.com\/datasheets\/GPS\/EM506_um.pdf) (EM-506)\u003cbr\u003e\n* [Product Page](http:\/\/www.usglobalsat.com\/p-717-em-506-sirf-iv.aspx#images\/product\/large\/717.jpg)\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690091462837,"sku":"PL4-GPS-12751","price":88.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/12751-01.jpg?v=1618121542"},{"product_id":"pl4-gps-13670","title":"GPS Receiver - GP-735 (56 Channel)","description":"\u003cp\u003eThe GP-735 is a slim, ultra-high performance, easy to use GPS smart antenna receiver. With -162dBm tracking sensitivity and only 29 second cold start time, the GP735 is a tiny, yet powerful, piece of tech. The slim design makes it ideal for applications where you don't have a lot of space to work in. Really it's quite small.\u003c\/p\u003e \n\n\u003cp\u003eThis 56-channel GPS module, based on the uBlox 7th generation chipset, has an operating voltage of 3.3~5.5V, an antenna on board, and connects to your system via TTL serial. The 1Hz update rate is fast enough for the majority of applications (and can be increased to 10Hz if you need) so whether you're tracking a pet or building an autonomous car, the GP-735 has you covered!\u003c\/p\u003e\n\n\u003cp\u003e**Note:** We are carrying the \"T\" option of this module which is TTL-UART and not USB. This receiver works with 6-pin 1mm pitch JST type cables and connectors which you can find in the _Recommended Products_ section below!\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* 35 x 8 x 6.5 mm\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Datasheet](https:\/\/cdn.sparkfun.com\/datasheets\/GPS\/GP-735T-150203.pdf)\u003cbr\u003e\n* [GPS Evaluation Software](http:\/\/www.u-blox.com\/en\/evaluation-tools-a-software\/u-center\/u-center.html)\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690091626677,"sku":"PL4-GPS-13670","price":99.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/13670-01a.jpg?v=1618121544"},{"product_id":"pl4-gps-13740","title":"GPS Receiver - GP-20U7 (56 Channel)","description":"\u003cp\u003eThe GP-20U7 is a compact GPS receiver with a built-in high performances all-in-one GPS chipset. The GP-20U7 accurately provides position, velocity, and time readings as well possessing high sensitivity and tracking capabilities. Thanks to the low power consumption this receiver requires, the GP-20U7 is ideal for portable applications such as tablet PCs, smart phones, and other devices requiring positioning capability.\u003c\/p\u003e\n\n\u003cp\u003eThis 56-channel GPS module, that supports a standard NMEA-0183 and uBlox 7 protocol, has low power consumption of 40mA@3.3V (max), an antenna on board, and -162dBm tracking sensitivity. With 56 channels in search mode and 22 channels \"all-in-view\" tracking, the GP-20U7 is quite the work horse for its size.\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* 56-Channel Receiver (22 Channel All-in-View)\u003cbr\u003e\n* Sensitivity : -162dBm\u003cbr\u003e\n* 2.5m Positional Accuracy\u003cbr\u003e\n* Cold Start : 29s (Open Sky)\u003cbr\u003e\n* 40mA @ 3.3V\u003cbr\u003e\n* 3-pin JST Terminated Cable* 18.4mm x 18.4mm x 4mm\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Datasheet](https:\/\/cdn.sparkfun.com\/datasheets\/GPS\/GP-20U7.pdf) (GP-20U7)\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690091888821,"sku":"PL4-GPS-13740","price":63.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/13740-01.jpg?v=1618121548"},{"product_id":"pl4-wrl-10532","title":"RF Link Receiver - 4800bps (434MHz)","description":"\u003cp\u003eThese wireless receivers work with our 434MHz transmitters. They can easily fit into a breadboard and work well with microcontrollers to create a very simple wireless data link. Since these are only receivers, they will only work communicating data one-way, you would need two pairs (of different frequencies) to act as a transmitter\/receiver pair.\u003c\/p\u003e\n\n\u003cp\u003e**Note:** These modules are indiscriminate and will receive a fair amount of noise. Both the transmitter and receiver work at common frequencies and don't have IDs. Therefore, a method of filtering this noise and pairing transmitter and receiver will be necessary. The example code below shows such an example for basic operation. Please refer to the example code and links below for ways to accomplish a robust wireless data link.\u003c\/p\u003e\n\n\u003cp\u003e**Note:** These receivers are almost identical to the [RF link 315MHz receiver](https:\/\/www.sparkfun.com\/products\/10533). SparkFun does everything in our power to make sure you receive the product you requested. However, if you are concerned you may have received the incorrect product you can verify which version receiver this is by running a simple test circuit.\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* 434 MHz\u003cbr\u003e\n* 500ft range (given perfect conditions)\u003cbr\u003e\n* 4800bps data rate\u003cbr\u003e\n* 5V supply voltage\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Arduino Library](http:\/\/www.airspayce.com\/mikem\/arduino\/VirtualWire\/)\u003cbr\u003e\n* [Datasheet](http:\/\/cdn.sparkfun.com\/datasheets\/Wireless\/General\/RWS-371-6_433.92MHz_ASK_RF_Receiver_Module_Data_Sheet.pdf)\u003cbr\u003e\n* [KLP Walkthrough Tutorial](http:\/\/www.sparkfun.com\/datasheets\/RF\/KLP_Walkthrough.pdf)\u003cbr\u003e\n* [Good AVR Tutorial](http:\/\/winavr.scienceprog.com\/example-avr-projects\/running-tx433-and-rx433-rf-modules-with-avr-microcontrollers.html)\u003cbr\u003e\n* [GitHub](https:\/\/github.com\/sparkfun\/RF_Links)\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39740028551349,"sku":"PL4-WRL-10532","price":28.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/10532-01.jpg?v=1618430491"},{"product_id":"pl4-wrl-10533","title":"RF Link Receiver - 4800bps (315MHz)","description":"\u003cp\u003eThese wireless receivers work with our 315MHz transmitters. They can easily fit into a breadboard and work well with microcontrollers to create a very simple wireless data link. Since these are only receivers, they will only work communicating data one-way, you would need two pairs (of different frequencies) to act as a transmitter\/receiver pair.\u003c\/p\u003e\n\n\u003cp\u003e**Note:** These modules are indiscriminate and will receive a fair amount of noise. Both the transmitter and receiver work at common frequencies and don't have IDs. Therefore, a method of filtering this noise and pairing transmitter and receiver will be necessary. The example code below shows such an example for basic operation. Please refer to the example code and links below for ways to accomplish a robust wireless data link.\u003c\/p\u003e\n\n\u003cp\u003e**Note:** These receivers are almost identical to the [RF link 434MHz receiver](https:\/\/www.sparkfun.com\/products\/10532). SparkFun does everything in our power to make sure you receive the product you requested. However, if you are concerned you may have received the incorrect product you can verify which version receiver this is by running a simple test circuit.\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* 315 MHz\u003cbr\u003e\n* 500ft range (given perfect conditions)\u003cbr\u003e\n* 4800bps data rate\u003cbr\u003e\n* 5V supply voltage\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Arduino Library](http:\/\/www.airspayce.com\/mikem\/arduino\/VirtualWire\/)\u003cbr\u003e\n* [Datasheet](http:\/\/cdn.sparkfun.com\/datasheets\/Wireless\/General\/RWS-374-3_315MHz_ASK_RF_Receiver_Module_Data_Sheet.pdf) (RWS-374-3)\u003cbr\u003e\n* [KLP Walkthrough Tutorial](http:\/\/www.sparkfun.com\/datasheets\/RF\/KLP_Walkthrough.pdf)\u003cbr\u003e\n* [Good AVR Tutorial](http:\/\/winavr.scienceprog.com\/example-avr-projects\/running-tx433-and-rx433-rf-modules-with-avr-microcontrollers.html)\u003cbr\u003e\n* [GitHub](https:\/\/github.com\/sparkfun\/RF_Links)\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39740028944565,"sku":"PL4-WRL-10533","price":26.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/10533-01a.jpg?v=1618430493"},{"product_id":"sparkfun-gnss-correction-data-receiver-neo-d9s-qwiic","title":"SparkFun GNSS Correction Data Receiver - NEO-D9S (Qwiic)","description":"\u003cp data-mce-fragment=\"1\"\u003eThe SparkFun NEO-D9S GNSS Correction Data Receiver is a satellite data receiver for L-Band correction broadcast. It can be configured for use with a variety of correction services including u-blox's PointPerfect satellite GNSS augmentation service, which provides homogenous coverage in the contiguous USA and Europe. With a clear view of the sky, especially a clear view to the South, it decodes the satellite transmission and outputs a correction stream, enabling a multi-band high-precision GNSS receiver (such as the u-blox ZED-F9P) to reach accuracies down to centimeter-level positioning without needing a separate RTK or NTRIP correction!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe board is equipped with a USB-C connector so you can hook the board to your laptop and configure the device using u-blox u-center if you want to. We've also equipped the breakout board with two Qwiic connectors, so you can connect it quickly and easily to your favorite development board and control it using our sophisticated u-blox GNSS Arduino Library. An SMA connector is included for a secure connection to an L-Band antenna. Power, I\u003csup data-mce-fragment=\"1\"\u003e2\u003c\/sup\u003eC, UART1, UART2, and SPI are broken out to 0.1\" spaced PTH pins. By connecting the NEO-D9S breakout to one of the ZED-F9P's communication ports, you will be able to know where your (or any object's) X, Y, and Z location is to better than an inch, without needing a separate correction source!\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":44213876818169,"sku":"PL4M-GPS-19390","price":232.75,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/files\/1_47624de3-3a73-4527-af55-3360b2a47eaf.jpg?v=1702686520"}],"url":"https:\/\/getcahits.com\/zh\/collections\/receivers.oembed","provider":"PuriLite","version":"1.0","type":"link"}