{"product_id":"pl3-wcde-4-1xptz-2mp-2x150ltl-led","title":"Larson 25' Surveillance Light Tower w\/ 6000W Generator - IP Camera \u0026 DVR - (2) 160W LEDs - 43200 Lumens","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003eMade in the USA\r\u003cbr\u003eThe WCDE-4-1XPTZ.2MP-2X150LTL-LED from Larson Electronics is a Portable Surveillance Tower w\/ IP Camera that is a towable, self-contained LED light plant powered by a water cooled diesel engine turning a single bearing 4 pole generator which produces 6,000 watts at 120\/240V @ 60Hz. The two 160 watt LED lamps included with this unit produce a combined total of 43,200 lumens, which can illuminate a 1-2 acre area. This 320 watt LED lighting package is a direct replacement for metal halide light plants. This trailer mounted light tower and generator set comes equipped with a 30 gallon fuel tank that will run continuously without refueling for up to 120 consecutive hours. The WCDE-4-1XPTZ.2MP-2X150LTL-LED features a full-HD security camera that can be used to record images. Operators may store footage via a 1TB DVR.\r\u003cbr\u003eThe WCDE-4-1XPTZ.2MP-2X150LTL-LED mobile light tower is a self-contained towable surveillance light tower package that produces enough light to illuminate an area up to 2 acres in size while providing security coverage via security camera and DVR. This unit contains a water cooled diesel engine powering a 6,000 watt generator, which supplies the current to two 160 watt LED lamps producing 21,600 lumens each for a combined total of 43,200 lumens of light. This unit can run uninterrupted for 120 hours straight without refueling and includes a telescoping light mast which can elevate the four LED lamps to a height of 25 feet. This mobile floodlight package is ideal for emergency services, large scale event illumination, construction, mining, industrial operations and anywhere an extended operation capable mobile lighting solution is needed.\r\u003cbr\u003eThe WCDE-4-1XPTZ.2MP-2X150LTL-LED mobile light tower incorporates a long list of impressive features. The diesel engine is a water cooled Kubota that operates at 1800 rpm. This engine features key operated electric starting, a full twelve volt electrical system, automatic low oil pressure and high temperature safety shutoffs, dual fuel filters and easy access oil and radiator drain ports to facilitate maintenance. A 30 gallon fuel tank allows the engine to operate for 120+ hours continuously without refueling. The 6,000 watt generator is a single bearing design and produces 120\/240 volt current at 60 Hz. The generator uses a four wire hookup system with an external ground allowing for setting up both electrical and mechanical safe grounding systems.\r\u003cbr\u003eSecurity Camera:\r\u003cbr\u003eThe monitoring device provides operators with crisp 1080p full-HD high resolution images. A 4.7-94mm varifocal lens automatically adjusts focus, providing operators with precise 20x optical zoom levels. Integrated long-range IR LEDs, with a wavelength measurement of 850 nm, enable the day\/night camera to see distances up to 492` under nighttime conditions. This unit offloads videos in MP4 format and features H.264 and MJPEG video compression.\r\u003cbr\u003eThe IP security camera is designed to perform in outdoor locations and rainy conditions. This IP66-rated unit resists the negative effects of non-corrosive liquids. De-fogging features enable the unit to operate in rainy and foggy conditions. This device is capable of operating in temperatures between -22°F and 149°F.\r\u003cbr\u003eThe security assembly comes with a 1TB, 8-channel network video recorder. Installation only takes minutes via plug-and-play, which automatically detects, displays and configures system components. With multiple recording modes (Schedule, Continuous, Motion Detection and Event), users could capture hours of footage with ease. The remote configurable network recorder features a bit rate of 40Mbps incoming and 80Mbps outgoing at up to 60fps per channel. To maximize storage, the unit supports H.265, H.264, and H.264 OVC video compression. The network recorder is compatible with two-way audio streaming (camera dependent) and includes 9 ethernet ports (RJ-45 interface). During recording, the unit handles the following data: activity log, email notification, event log, event notification, video analytics and event search. This device offloads videos in MP4 format.\r\u003cbr\u003e\u003cstrong\u003eLights:\u003c\/strong\u003e\r\u003cbr\u003eThe lighting system on this unit is comprised of two 160 watt LED lamps producing 21,600 lumens of light each attached to the end of the telescoping light boom. These floodlights produce a wide flood light pattern capable of illuminating 2 acres with a combined total of 43,200 lumens of light. Each floodlight is securely fastened to the light boom and each lamp includes a support bracket to help maintain lamp stability within its housing. The lamps are connected to the power source via a water tight male pin connector that attaches to a receptacle located on the end of the telescoping boom.\r\u003cbr\u003e\u003cstrong\u003eHeat Management:\u003c\/strong\u003e\r\u003cbr\u003eHeat is the single largest factor in premature LED failure and color shifting. These LED units feature individual heat sinks per bank of six LEDs to control heat buildup rather than utilizing a single housing to dissipate heat. This allows for more thorough cooling of the LEDs for extended operating periods. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 80,000 hours. In addition, should an LED failure occur, these LED flood lights are field serviceable. Each bank of six LEDs can be replaced with the fixture installed. This allows for the tower to stay in operation until repairs can take place, and eliminates the need to remove and disassemble the entire fixture for repairs.\r\u003cbr\u003e\u003cstrong\u003eDurability:\u003c\/strong\u003e\r\u003cbr\u003eAs well as unparalleled heat control, the GAU-LTL series of LED lights from Larson Electronics also offer IP67 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40° Celsius to +80° Celsius, are waterproof, and resist ingress of dust, dirt and humidity. The housings are formed from die cast aluminum and the optics are high transmission PMMA with 98% light transmittance. The Cree LEDs help these units achieve resistance to vibrations and are rated at 70% lumen maintenance after 80,000 hours of use. We use these LED lights for applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered.\r\u003cbr\u003e\u003cstrong\u003eLED Benefits:\u003c\/strong\u003e\r\u003cbr\u003eUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\r\u003cbr\u003eLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\r\u003cbr\u003eControls:\r\u003cbr\u003eThe operations system for this unit is a centrally located control panel within the light tower enclosure. Four circuit breaker protected switches allow individual control of the lights while an individual hour meter tracks unit operating time. Also included is an alternator warning light, fuel primer system, preheating switch, 120 volt GFCI duplex receptacle for auxiliary power takeoff and a 240V twist lock power receptacle.\r\u003cbr\u003eTelescoping Boom:\r\u003cbr\u003eThe telescoping boom consists of three sections extending up to 25 feet through the use of two manual self braking winches and allows for rotating the lights 360 degrees. One winch is mounted to the trailer tongue and acts to raise the tower into a vertical position while the other is mounted to the boom and is used to extend the tower to the desired height. The telescoping boom is constructed of galvanized steel to resist rusting and corrosion and is capable of withstanding 51 mph winds when extended to its full height and the stabilizing outriggers are deployed. The stabilizing outriggers are a three point design with one located under the trailer tongue and two on the rear sides of the unit. The two rear outriggers are adjustable and include 1,000 lbs. swivel jacks for leveling and stabilizing the tower.\r\u003cbr\u003eHousing:\r\u003cbr\u003eAll of the operating components are housed within a protective compartment constructed of recyclable LMDPE (linear medium density polyethalene) plastic. This material is extremely corrosion resistant and retains its orignal appearance even after years of use. The enclosure is high impact crack resistant and retains resale value for longer than metal counterparts while also minimizing environmental impact. The highly durable plastic material is fully UV stabilized, contains long term antioxidants and is resistant to both high and low temperatures. The plastic enclosure of the WCDE-4-1XPTZ.2MP-2X150LTL-LED is significantly lighter than comparable metal enclosures while offering a more attractive appearance. A vertical lift door provides access to the interior while latches provide secure closing while the unit is in use. The entire unit can be loaded and unloaded onto trucks via forklift sleeves mounted to the outer section of the light mast. The entire unit is mounted onto a two wheel trailer with a 2,000 lbs. leaf spring axle. A standard two inch ball coupling, three inch pintle hitch and two standard safety chains allow for easy hookup and towing.\r\u003cbr\u003esales@larsonelectronics.com\r\u003cbr\u003efor more information about our custom options tailored to meet your specific industry needs.\u003cbr\u003e\u003cbr\u003eSpecifications\u003cbr\u003eEngine:  Kubota D1105-BG-ET01\u003cbr\u003eEngine Type:  Vertical, liquid-cooled, 4-cycle diesel engine\u003cbr\u003eEngine Speed:  1800 RPM\u003cbr\u003eNo. of Cylinders:  3\u003cbr\u003eGenerator:  Marathon Pancake 6KW 4-Pole Brushless\u003cbr\u003eVoltage:  120\/240V Single Phase24V AC (PoE - 802.3at) \u003cbr\u003eAuxiliary Power Supplies):  120V Duplex Receptacle, 240V Twist Lock\u003cbr\u003eBattery  12V\u003cbr\u003eFuel Cell Capacity:  30 Gallons\u003cbr\u003eFuel Delivery:  Electric\u003cbr\u003eNoise Level:  Db level 63 @ 23 ft. \u003cbr\u003eMast Type:  Manual Crank-Up\u003cbr\u003eBoom Height: Up to 25`\u003cbr\u003eMaterials:  Galvanized Steel Die Cast Aluminum Housing, Acrylic Optics Aluminum Aluminum Plastic Enclosure, 12ga Formed Steel Chassis\u003cbr\u003eOperation:  Manual Hand Crank Winch\u003cbr\u003eWinch:  (2) 1500lb, Self-Braking\u003cbr\u003eStages:  Three\u003cbr\u003eLamp Type:  Cree LED\u003cbr\u003eTotal Watts:  320 (160W per lamp)25.5 (Max)\u003cbr\u003eTotal Lumens:  86,400 (21,600 per lamp)\u003cbr\u003eLuminous Efficiency:  135 Lm\/W\u003cbr\u003eLED Color Temperature:  Cool White - 5500-6500K\u003cbr\u003eLED Life Expectancy:  80,000 hours\u003cbr\u003eOptics Efficiency:  98% - PMMA High Transmittance Optics\u003cbr\u003eLed Drive %:  90%\u003cbr\u003ePower Factor:  \u0026gt;97%\u003cbr\u003eMounting:  Stainless Steel Trunnion Mount U-Bracket\u003cbr\u003eMaterials:  Galvanized Steel Die Cast Aluminum Housing, Acrylic Optics Aluminum Aluminum Plastic Enclosure, 12ga Formed Steel Chassis\u003cbr\u003eHousing Color:  Natural Aluminum\u003cbr\u003eAmbient Temperature Range:  -40°C to +80°C -22°F to 149°F\u003cbr\u003eWaterproof Rating:  IP67\u003cbr\u003eCoverage:  1 to 2 Acres\u003cbr\u003eCamera Type:  Security Camera\u003cbr\u003eDimensions:  14.38\" H x 7.12\" D\u003cbr\u003eCamera Weight:  9 lbs\u003cbr\u003eTotal Watts:  320 (160W per lamp)25.5 (Max)\u003cbr\u003eVoltage:  120\/240V Single Phase24V AC (PoE - 802.3at) \u003cbr\u003eImage Sensor:   CMOS\u003cbr\u003eConnectors: 1.0Vp-p, 75 Ohm, BNC\u003cbr\u003eEffective Pixels:  2.1 MP, 1920 x 1080 Resolultion\u003cbr\u003eMin. Illumination:  0.02 Lux @ F1.6 AGC On, 0 Lux w\/ IR\u003cbr\u003eElectronic Shutter:  1 ~ 1\/10,000s\u003cbr\u003eLens:  4.7-94mm Varifocal Lens\u003cbr\u003eAngle of View:  58.3° (Wide) ~ 3.2° (Tele)\u003cbr\u003eOptical Zoom:  20x\u003cbr\u003eDay\/Night:  ICR \u003cbr\u003eIR Distance:  492` (850 nm) \u003cbr\u003eVideo Framerate:  1080p @ 30fps\u003cbr\u003eVideo Offload:  MP4\u003cbr\u003eVideo Output:  (1) BNC\u003cbr\u003eLanguage:  English\u003cbr\u003eAmbient Temperature Range:  -40°C to +80°C -22°F to 149°F\u003cbr\u003eHousing Materials:  Aluminum\u003cbr\u003eLens Material:  Polycarbonate\u003cbr\u003eColor:  Natural Aluminum Beige\/Black\u003cbr\u003eStorage Capacity:  1 TB SATA Hard Drive\u003cbr\u003eChannels:  8\u003cbr\u003eCamera Resolution Support:  Up to 8 MP\u003cbr\u003eInstallation Type:  Plug and Play\u003cbr\u003eIncoming\/Outgoing Bit Rate: :  40 Mbps\/80 Mbps\u003cbr\u003eFrame Rate (fps):  60 fps per Channel\u003cbr\u003eRecording Modes:  Continuous, Schedule, Event, Motion Detection and VCA\u003cbr\u003eExport Format:  MP4\u003cbr\u003eVideo Outputs:  (1) RCA, (1) VGA, (1) HDMI, (1) USB 2.0 (Front), (1) USB 3.0 (Rear)\u003cbr\u003ePoE:  = 120W, Supported Standards- 802.3af and 802.3at\u003cbr\u003eAlarm Input:  4x (Rear Panel), Camera Dependent\u003cbr\u003eAlarm Output:  1x (Rear Panel), Camera Dependent\u003cbr\u003eProtocols:  IPv4, TCP\/IP, UDP, HTTP, UPnP, RTSP\/RTP\/RTCP, SMTP, FTP, DHCP, NTP, DNS, ONVIF, HTTP Multipart \u003cbr\u003eMaterials:  Galvanized Steel Die Cast Aluminum Housing, Acrylic Optics Aluminum Aluminum Plastic Enclosure, 12ga Formed Steel Chassis\u003cbr\u003eMaterials:  Galvanized Steel Die Cast Aluminum Housing, Acrylic Optics Aluminum Aluminum Plastic Enclosure, 12ga Formed Steel Chassis\u003cbr\u003eHitch: 2\" Ball Coupler and 3\" Pintle Hitch\u003cbr\u003eFinish:  Industrial Grade Paint\u003cbr\u003eAxle:  (1) 2,000 lbs.\u003cbr\u003eSuspension:  2,000 lbs. Double Eye Leaf Springs\u003cbr\u003eOutriggers: (4) Adjustable Outriggers w\/ 2,500 lbs. Manual Leveling Jacks\u003cbr\u003eLighting: DOT Approved tail, side, brake, and directional lights\u003cbr\u003eWheels:  (2) 13\" 5x4.5 Steel Rims\u003cbr\u003eTires:  ST175\/80\/D13 \u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38284810387637,"sku":"PL3-WCDE-4-1XPTZ.2MP-2X150LTL-LED","price":62090.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-WCDE-4-1XPTZ.2MP-2X150LTL-LED-1_790b71fd-3149-441e-b561-01344338a226.jpg?v=1611023199","url":"https:\/\/getcahits.com\/products\/pl3-wcde-4-1xptz-2mp-2x150ltl-led","provider":"PuriLite","version":"1.0","type":"link"}