{"product_id":"pl3-lm-40-4s-5x500w-led","title":"2400 Watt High Intensity LED Light Tower - Four Stage Mast - Extends up to 40 Feet - 324,000 Lumens","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLM-40-4S-5X500W-LED Four Stage LED Light Tower\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eMast Summary\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: Cree® LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003e13 to 40 Foot Light Mast \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamps: (5) 480 Watt LED Fixtures\u003c\/td\u003e\n\u003ctd\u003eSteel Construction \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 2,400 (480W per lamp)\u003c\/td\u003e\n\u003ctd\u003ePowder Coated Finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 324,000 (64,800 per lamp)\u003c\/td\u003e\n\u003ctd\u003eRemovable Mast Head\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficiency: 135 lm\/w\u003c\/td\u003e\n\u003ctd\u003e125 mph Wind Resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Life Expectancy: 80,000 hours\u003c\/td\u003e\n\u003ctd\u003eManual or Optional Electric Operation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptics Efficiency: 98% - PMMA High Transmittance Optics\u003c\/td\u003e\n\u003ctd\u003eMade in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLed Drive %: 90% \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood Pattern\n\u003c\/td\u003e\n\u003ctd\u003eLED Lamp Head Summary\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 6000K\n\u003c\/td\u003e\n\u003ctd\u003eHigh Output LED Lamps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temp Rating:-40°C to +80°C\n\u003c\/td\u003e\n\u003ctd\u003eExtreme Area Coverage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor: \u0026gt;97%\n\u003c\/td\u003e\n\u003ctd\u003eDirect Replacement for (5) 1000W MH Towers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Voltage: Universal 120-277V AC 50\/60 Hz\n\u003c\/td\u003e\n\u003ctd\u003e2400W LED compared to 4000W MH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMast Length: 13 feet - 40 feet\n\u003c\/td\u003e\n\u003ctd\u003e324,000 Total Lumen Output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: +-600 lbs\u003c\/td\u003e\n\u003ctd\u003eIndependently Adjustable Light Heads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials: Steel\n\u003c\/td\u003e\n\u003ctd\u003eDial-in Adjustability per light head\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish: Powder Coated - Gloss Blue\n\u003c\/td\u003e\n\u003ctd\u003e98% Transmission High Purity PMMA Optics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: Universal 100-277 VAC, 50\/60Hz\n\u003c\/td\u003e\n\u003ctd\u003eMultiple LED Banks for Heat Dispersion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperation:(2) 2,500lbs Hand Winches, Electric Optional\n\u003c\/td\u003e\n\u003ctd\u003e135 Lumens Per Watt Efficiency\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable: 3\/16\" Aircraft Grade Galvanized Steel Cable\n\u003c\/td\u003e\n\u003ctd\u003e70% Lumen Retention after 80,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting: 1\/4\" thick, 13\"x15\" Six Bolt Hole Bracket\n\u003c\/td\u003e\n\u003ctd\u003eIP67 Waterproof LED Fixtures\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWiring: 45` 10\/3 SOOW Cable w\/ Cord Cap\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eShipping Weight: 1300 lbs\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eShipping: Common Freight\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eOptions: Length- Mounting-Fixtures\/ Call Us for Special Requirements\n\u003c\/td\u003e\n\u003ctd\u003eToll Free: 1-800-369-6671\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003e\n\u003c\/td\u003e\n\u003ctd\u003eIntl: 1-214-616-6180\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThis unit is Made In USA - Manufactured in Texas\nThe Larson Electronics LM-40-4S-5X500W-LED fold over light mast provides a safe and effective way for operators to quickly deploy 2,400 watts of intense LED lighting to elevations up to forty feet. Five 480 watt high output LED lights produce a wide spread of intense white light, equivalent to a 5,000 watt metal halide light tower, allowing this unit to effectively cover large work areas with high quality illumination. This light tower folds over for easy transportation, features a rotating boom that allows for 360° of rotation, and a removable mast head for storing mounted equipment when not in use.\n*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS*\nThe LM-40-4S-5X500W-LED 2,400 watt telescoping steel light mast with 1,000 watt metal halide equivalent LED light heads from Larson Electronics™ is designed to quickly and safely deploy 2,400 watts of intense LED lighting in locations where elevated illumination is needed for maximum area coverage. This light boom can be extended to forty feet for maximum area coverage and collapsed to thirteen feet for applications where a footprint smaller is required. The tower is constructed of square steel tubing with a base section 11.25` in length and 5\" by 5\" by 3\/16\" thick, lower section 11.25` in length and 4\" by 4\" by 1\/8\" thick, an upper section 11.25` in length and 3\" x 3\" by 1\/8\" thick, and a top section 11.75` and 2\" by 2\" by 1\/8\" thick. Each section has a 15-18\" overlap. The mast is elevated using an included 2,500 lbs hand winch with 3\/16\" galvanized steel cable and extended to its full height using a second 2,500 lbs hand winch. \n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eClick Image to Enlarge \u003c\/td\u003e\n\u003ctd\u003eClick Image to Enlarge \u003c\/td\u003e\n\u003ctd\u003eClick Image to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 200px;\"\u003e\nLights: The lighting system on this articulating light mast is comprised of five of our  480 watt LED lamps producing 64,800 lumens of light each attached to the end of the telescoping pneumatic light boom. These floodlights produce a wide flood light pattern with a combined total of 2,400 watts and 324,000 lumens of light. The GAU-LTL-500W-LED lights are ideal replacements for fragile and hot running 1,000 watt metal halide lamps, offering increased durability, longer lamp life, and lower power consumption. The entire lighting assembly is connected to the power source via a 4-switch control box. Each light head is on an individual circuit and can be powered on or off independently of the other light fixtures.\nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units feature individual heat sinks per bank of six LEDs to control heat buildup rather than utilizing a single housing to dissipate heat. This allows for more thorough cooling of the LEDs for extended operating periods. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 80,000 hours. In addition, should an LED failure occur, these LED flood lights are field serviceable. Each bank of six LEDs can be replaced with the fixture installed. This allows for the tower to stay in operation until repairs can take place, and eliminates the need to remove and disassemble the entire fixture for repairs.\nDurability: As well as unparalleled heat control, the GAU-LTL-500W-LED series of LED lights from Larson Electronics also offer IP67 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40° Celsius to +80° Celsius, are waterproof, and resist ingress of dust, dirt and humidity. The housings are formed from die cast aluminum and the optics are high transmission PMMA with 98% light transmittance. The Cree® LEDs help these units achieve resistance to vibrations and are rated at 70% lumen maintenance after 80,0000 hours of use. We use these LED lights for applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered.\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 21px;\"\u003eThe above image shows the comparison of the traditional 4,000 watt metal halide light plant such as our LM-30-3S-4X1000W (left) to the LM-30-4S-4X500W-LED LED light tower. The area being illuminated by each tower is 300` in length and 250` in width. Unlike the metal halide light plant, there are no hot spots with the LED plant. This high output LED light plant provides an even beam spread over the targeted work area without overcast, glare, light spillage, and wasted illumination. Color rendering is also increased with LED light plants, providing a more realistic night vision that more closely resembles natural daylight illumination. \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.\nEach floodlight is securely fastened to the mast head with an innovative trunnion style stainless steel mounting bracket that allows the light to be adjusted through 180° of vertical movement. The LED light head is secured to the mounting bracket with shock dampening rotating inserts. The insert provides precision aiming down to 1° while providing increased longevity to the LED fixture. To vertically adjust the unit after mounting, the user simply loosens the screws located on either side of the unit, moves it into the desired position, then re-tightens the screws. The base of the mounting trunnion is equipped with several machined slots which allow users to utilize existing mounting holes and slide the unit for precise mount positioning.\n\u003ctable style=\"height: 321px; width: 550px;\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 133px;\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 21px;\"\u003eClick Image to Enlarge\u003c\/td\u003e\n \u003ctd\u003eClick Image to Enlarge \u003c\/td\u003e\n\u003ctd\u003eClick Image to Enlarge \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 133px;\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 21px;\"\u003eClick Image to Enlarge\u003c\/td\u003e\n\u003ctd\u003eClick Image to Enlarge \u003c\/td\u003e\n\u003ctd\u003eClick Image to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nThe LM family of telescoping towers feature a proprietary mast guidance system, which provide increased stability during high winds. When lowered to 13 feet, the mast can withstand winds up to 125 mph. When elevated to its full upright position, the mast can be rotated a full 360°. By loosening the T-Handle, operators can rotate the mast with easy in either direction. The mast can be positioned in one of four different directions, and locked back in place by re-tightening the T-handle. The mast itself spins freely with easy, and can typically be rotated with a single hand.\nThe LM series of towers are powder coated with glossy blue finish for corrosion resistances and aesthetics. These light masts are typically mounted to trailers or other stable surfaces via a 15 inch by 13 inch, 1\/4 inch thick mounting base-plate which has been drilled to accept six 5\/8\" anchor bolts. A 52\" long mounting plate constructed of 2\" by 2\" by 1\/4\" thick carbon steel is attached to the upper section of the mast which provides a strong and stable platform for the five LED fixtures.\nThis light tower weighs approximately 600 lbs, can easily support and lift 150 lbs fixtures. The entire tower assembly is shipped via common freight carrier and when shipped measures approximately 16.5 feet long, 4 feet wide, 5 feet tall and weighs approximately 1300 lbs. Larson Electronics can custom tailor these units to the customer`s requirements with longer sections and larger mounting plates. We also offer a choice of either the manual 2,500 lbs hand winches included standard or optional electric winches.\nSuggested Applications: With its easy deployment the LM-40-4S-5X500W-LED is ideal for use in applications that require regular intensive cleaning and are exposed to a lot of vibration, dust, dirt, where abusive working conditions are encountered, temporary lighting, and construction sites.\n\n \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":40774287524021,"sku":"PL3-LM-40-4S-5X500W-LED","price":38974.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LM-40-4S-5X500W-LED.jpg?v=1628905740","url":"https:\/\/getcahits.com\/products\/pl3-lm-40-4s-5x500w-led","provider":"PuriLite","version":"1.0","type":"link"}