{"product_id":"pl3-hal-led-sol-80c-c1d2-20c","title":"10W Solar Powered LED Hazardous Location Light - C1D2 30W Panel - C1D2 SS N4X Control Box - 80' Cord","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eHAL-LED-SOL-80C-C1D2-20C Hazardous Location Solar Powered LED Strobe Lamp\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eListing: United States \u0026amp; Canada\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass I, Division 2 Groups A,B,C,D \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Type: LED\u003c\/td\u003e\n\u003ctd\u003eUL 1570\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Dimensions: 5.94\" x 9.6\"\u003c\/td\u003e\n\u003ctd\u003eUL 595: Marine Outside Type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolar Panel Dimensions: 11-3\/8\"L x 15-3\/4\"D\u003c\/td\u003e\n\u003ctd\u003eUL 844: Class I, Division 2 \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: -\u003c\/td\u003e\n\u003ctd\u003eUL Listed to CSA 22.2-137\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 12V DC\u003c\/td\u003e\n\u003ctd\u003eNEMA 4X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery: (4) 18aH Sealed Lead Acid Batteries\u003c\/td\u003e\n\u003ctd\u003eUSCG Accepted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRuntime: 12 Hours \u003c\/td\u003e\n\u003ctd\u003eCSA Certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharging Time: 5 Hours\u003c\/td\u003e\n\u003ctd\u003eNew York City Department of Buildings Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel Watts: 30W\u003c\/td\u003e\n\u003ctd\u003eMaterial meets UL 94-V-0 standards for flame retardancy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Watts: 10W (7W for Colored Strobe)\u003c\/td\u003e\n\u003ctd\u003eUL for Safety for Supplemental Requirements for Luminaries for Installation on Marine Vessels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 1,050\u003c\/td\u003e\n\u003ctd\u003eC1D2 Rated Panel Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Lamp Life Expectancy: 50,000+ Hours\u003c\/td\u003e\n\u003ctd\u003eC1D2 Rated Control Box Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Color Options: Red, Green, Blue, Amber or White\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle: 360°\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Strobing or Steady Burn\u003c\/td\u003e\n\u003ctd\u003eSpecial Orders-Special Requirements \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eHousing Material: Copper-free Cast Aluminum Alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eFinish: Baked Powder Epoxy Coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Mounting: Wall, Ceiling or Pendant \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel Mounting: Flat Surface \/ Round\/Square Pole \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWiring: 80` 10\/2 SOOW Cord \u003c\/td\u003e\n\u003ctd\u003eE-mail:\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in Texas \nThe HAL-LED-SOL-80C-C1D2-20C Solar Powered LED Hazardous Location Light from Larson Electronics is a reliable lighting solution for remote areas and standalone applications where connection to external power is either impractical or unavailable. Charged by a Class I, Division 2 solar panel, four 12V AC 18aH sealed lead acid batteries protected by a Class I, Division 2 enclosure, provide constant, reliable power to the LED strobe light. \nThis hazardous location LED light is powered by four 8aH sealed lead acid batteries that are recharged by a 30-watt solar panel. Light output comes from a 10-watt LED lamp that produces 1,050 lumens. This Class I, Division 2 solar panel can be equipped with either a dusk to dawn day\/night sensor, a motion sensor, an on\/off switch, or configured to run 24\/7. The day\/night sensor is programmed to activate the solar panel in the evening and to shut it off during the day. The motion sensor will activate the panel upon detecting motion. The on\/off switch will activate and shut off the solar panel according to the operator`s preferences.\nThe color options for the HAL-LED-SOL-80C-C1D2-20C are red, blue, green, amber and white. The illumination produced by the Class I, Division 2 LED light will cover an area approximately 55€™ long x 55€™ wide when mounted 12 feet from the ground. This solar-powered LED strobe light is constructed of copper free cast aluminum with a baked powder epoxy finish. \n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface Mount \u003c\/td\u003e\n\u003ctd\u003ePendant Mount \u003c\/td\u003e\n\u003ctd\u003eStanchion Mount \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd colspan=\"3\"\u003eMounting \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRound Pole \u003c\/td\u003e\n\u003ctd\u003eSquare Pole \u003c\/td\u003e\n\u003ctd\u003eSurface \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. \nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. Solid state LED lighting is also safer for the environment as LEDs are 100% recyclable. And recycling simultaneously reduces operating costs by eliminating the need for the expensive special disposal services required with traditional gas burning and arc type lamps. \nWiring\/Power: This HAL-LED-SOL-80C-C1D2-20C is powered by four 12V AC 18aH sealed lead acid batteries that are recharged by the solar panel. These rechargeable batteries provide a continuous supply of steady, reliable power. The lead acid battery pack is contained within a stainless steel NEMA 4X Class I, Division 2 control box, not the light. This fixture ships with 80 feet of 10\/2 SOOW cord that connects the explosion proof strobe light to the solar panel. Custom lengths are available upon request. Please contact us for special requirements.\nAs with all solar powered equipment, charging time is affected by the amount of available ambient light. When ambient light levels drop below a certain level, such as on cloudy days, the unit will not recharge as quickly. The light runs for 12 hours when the battery is fully charged. Charging time for the sealed lead acid batteries is 5 hours when exposed to direct sunlight. Indirect sunlight will extend the charge time.\nMounting: Mounting options include ceiling, wall and pendant for the lamp fixture and flat surface or round\/square pole mounting such as on utility poles or structure supports for the solar panel.\nNOTE: Larson Electronics has further upgraded the options available with this light. We expect the light to be mounted separately from the panel. This incorporates a class rated panel, charge controller, and sealed battery solution. This allows the panel to be installed within C1D2 environments. This means the solar panel can be mounted in direct sunlight (not in the C1D1 hazardous area) while the light is mounted in a C1D1 hazardous area workspace. Standard installation for explosion proof lighting, including threaded rigid pipe to the LED light fixture and appropriate seal-offs, etc. are required. Larson Electronics offers a non class rated panel solution for customers who can mount the panel completely outside of the hazloc environment. No C1D1 rated solar panels exist, so the panel must be located outside the C1D1 environment in either panel solution offered.\nSuggested Applications: Paint spray booths, aircraft maintenance, oil drilling rigs, refineries, solvent and cleaning areas, gas processing plants, chemical manufacturing, waste treatment plants, remote locations and more. \n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38354729599157,"sku":"PL3-HAL-LED-SOL-80C-C1D2-20C","price":9312.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-HAL-LED-SOL-80C-C1D2-20C.jpg?v=1628564906","url":"https:\/\/getcahits.com\/products\/pl3-hal-led-sol-80c-c1d2-20c","provider":"PuriLite","version":"1.0","type":"link"}