{"product_id":"pl3-epl-anc-48-2l-led-d-v2","title":"Larson Explosion Proof LED Paint Spray Booth Light - T6 - Modbus TCP\/IP Network, Remote Dimmable","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please email us at info@purilite.ca to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003eMade in the USA\r\u003cbr\u003eThe Larson Electronics EPL-ANC-48-2L-LED-D-V2 Explosion Proof 0-10V Dimmable LED Light Fixture is a NRTL Listed for United States and Canada approved connected lighting solution for Class 1 Division 1 \u0026amp; 2 and Class 2 Division 1 and 2 environments. Modbus TCP\/IP network capable and featuring remote dimming capabilities, this explosion proof LED light has a T6 temperature rating and carries a paint spray booth light certification, making it ideal for applications such as paint booths, oil rigs, offshore applications, petrochemical, manufacturing, chemical storage, water treatment centers, and food processing plants. Operators can setup remote access, controls and configurations using the Modbus TCP\/IP network controller (via a standard web browser).\r\u003cbr\u003eThis four foot, two lamp connected dimmable LED fixture is ideal for operators seeking a top quality explosion proof light that will reduce operating costs, improve lighting quality and reduce downtime incurred from frequent servicing intervals. The EPL-ANC-48-2L-LED-D-V2 is equipped with Larson Electronics’ specially designed dimmable LED T-series bulbs which produce 7,000 lumens.\r\u003cbr\u003eThis two lamp explosion proof LED linear fixture is lighter in weight, has a slimmer profile, and produces more light than traditional explosion proof fluorescent fixtures. The four foot long LED tube design bulbs included with this unit are rated at 50,000 hours of service life, which is over twice as long as standard T8 bulbs.\r\u003cbr\u003eAevum Network Controlled Lighting Solution:\r\u003cbr\u003eThe Aevum Network Controlled Lighting Solution from Larson Electronics enables connected and intelligent illumination using cutting-edge and existing networks. Using Modbus TCP\/IP or DALI (for fixtures with dimming features), businesses can seamlessly control lights and sensors from remote locations, without traditional light switches. Web-based panels facilitate real-time monitoring of connected equipment and allows operators to switch units on\/off, configure activation settings and more. Businesses may utilize their own systems and software with these controllers, ensuring robust flexibility and cost savings (no contracts). The Aevum Network Controlled Lighting Solution can improve productivity in the workplace by automating basic lighting controls and making lighting controls widely accessible in the facility, via local networks or the internet. Operators also have the option to monitor the status of fixtures from a remote location, which can improve maintenance and reduce downtimes.\r\u003cbr\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e\r\u003cbr\u003eControls for the explosion proof LED fixture is accessible using a web-based control panel. Compatible with HTTP, XML, or Modbus TCP\/IP protocols, network configuration is accessible using web-based pages (no programming required). Operators can monitor or setup controls from a remote area using the internet or local IP network and any standard web browser. Functions and controls include: on\/off, pulse and monitor. LED indicator lights on the device provide the real-time information about digital input voltage, relay coil, network status and network activity. Password protection for the setup page is available (10 characters maximum).\r\u003cbr\u003eThis fixture carries a T6 temperature rating and is approved for Class I Division 1, Groups C and D, Class I, Division 2, Group A, B, C and D, and Class II, Division 1 and 2, Groups E, F and G environments where flammable or combustible gases, vapors, dusts, fibers, and flying exist or stand the potential to exist. This LED linear fixture is approved for use in confined spaces.\r\r\u003cbr\u003eT\r\u003cbr\u003ehe included dimmable LED lamps have a 50,000+ hour service life, both of which result in extreme efficiency and greatly reduced maintenance costs. These fluorescent style LED lamps have internal drivers, eliminating external power components. The solid state design of the LED lamps give this fixture superior resistance to damage from vibration, extremes in temperature and a lamp service life over twice that of standard fluorescent bulbs. This second generation lamp is offered in 5600K cool white, 4500K natural white, and 3000K warm white. Our standard unit ships with 5600K unless different color temperature is specified.\r\u003cbr\u003eThese dimmable 28 watt LED tubes work with standard 0-10 dimming controllers. Lumen output is 125 lumens per watt for a total of 3,500 lumens per bulb. While fluorescent lamps are omni-directional and illuminate 360°, the LED style replacement lamps are directional and offer a 160° beam spread. This allows for directed illumination where it is needed and not wasting light via reflectors or or over illuminating areas. This dimming LED tube uses electronic silicon control dimming. We have tested these lamps on all Lutron and Leviton electronic dimmers, such as the Leviton 6633-PLW. Please note: the dimmer switch must be installed outside the hazardous environment or use an explosion proof dimmer switch. Larson Electronics offers an explosion proof dimmer switch that can be installed within the hazardous location.\r\u003cbr\u003eUnlike the glass tube design of traditional fluorescent lamps, these LED T-Style lamps have no filaments or fragile housings to break during operation. Instead of using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. The LED assembly is mounted to the \"tube\" constructed from extruded aluminum, with a polycarbonate lens protecting the LEDs. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than fluorescent lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional fluorescent lighting.\r\u003cbr\u003eThe 28 watt LED lamps produce 30% more illumination than standard T8 bulbs while offering lower amp draw and increased reliability. Each lamp produces 3,500 lumens at 125 lumens per watt, for a combined 7,000 total lumen light output. An EPL-48-2L-T8 explosion proof fluorescent light, with a combined total of 64 watts, draws 0.54 amps at 120 volts AC. This LED version of the same light, with a total of 56 watts, draws only 0.47 amps at 120 volts AC at full intensity. The EPL-ANC-48-2L-LED-D-V2 operates on any voltage from 120V or 277V AC 50\/60hz without any modifications.\r\u003cbr\u003eEnergy Consumption Comparison\r\u003cbr\u003eT5HO\r\u003cbr\u003eT8\r\u003cbr\u003eLED\r\u003cbr\u003eWattage\r\u003cbr\u003e108 watts\r\u003cbr\u003e64 watts\r\u003cbr\u003e56 watts\r\u003cbr\u003eAmp Draw @ 120V AC\r\u003cbr\u003e0.90 amps\r\u003cbr\u003e0.54 amps\r\u003cbr\u003e0.47 amps\r\u003cbr\u003eAmp Draw @ 220V AC\r\u003cbr\u003e0.49 amps\r\u003cbr\u003e0.29 amps\r\u003cbr\u003e0.25 amps\r\u003cbr\u003eAmp Draw @ 240V AC\r\u003cbr\u003e0.45 amps\r\u003cbr\u003e0.27 amps\r\u003cbr\u003e0.23 amps\r\u003cbr\u003eAmp Draw @ 277V AC\r\u003cbr\u003e0.39 amps\r\u003cbr\u003e0.24 amps\r\u003cbr\u003e0.20 amps\r\u003cbr\u003eLamp Life Expectancy\r\u003cbr\u003e20,000 hours\r\u003cbr\u003e24,000 hours\r\u003cbr\u003e50,000 hours\r\u003cbr\u003eOperation cost per year\r\u003cbr\u003e$56.77\r\u003cbr\u003e$33.64\r\u003cbr\u003e$29.43\r\u003cbr\u003eOur EPL-ANC-48-2L-LED-D-V2 LED light fixture is NRTL Listed for U.S. and Canada approved for use in paint spray booths. Please note, according to the NEC, using threaded rigid pipe does not require additional seal offs with this fixture. An EYM and seal off is necessary for flex conduit or other non-rigid pipe implementations.\r\u003cbr\u003e\u003cstrong\u003eNetwork:\u003c\/strong\u003e\r\u003cbr\u003eThe network controller is equipped with one optically-isolated digital input and one SPDT relay contact. Compatible with 9-28V DC, the unit features a 3-position removable relay (N, NO, NC), a 5-position removable power\/inputs and an 8-pin RJ-45 port for network connections. Operators can mount the device on walls, surfaces or din rails for space-saving benefits.\r\u003cbr\u003eMounting Options:\r\u003cbr\u003eUnless otherwise specified, our standard, most popular configuration is the bracket end mounting shown enlarged below. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit). Additional mounting configurations can be customized to meet the requirements on the application. Please contact us for special mounting configurations.\r\u003cbr\u003eAdjustable Surface Mount Brackets:\r\u003cbr\u003eEach bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg.\r\u003cbr\u003eSuspension Mounting:\r\u003cbr\u003ePendant mount fixtures hang from the ceiling and are suspended by rigid pipe. Each fixture features a 1\/2” NPT junction box on one end, and a 1\/2” NPT adjustable L-bracket on the other end of the fixture. Operators bring rigid pipe down to the threaded mounting hubs. Wiring is fed down through the rigid pipe to the junction box and tied in to the fixture’s lead wires, completing the electrical connection. The adjustable L-shape mounting bracket provides support for the opposite end of the fixture.\r\u003cbr\u003eSuggested Applications:\r\u003cbr\u003ePaint spray booths, aircraft maintenance, oil drilling rigs, refineries, solvent and cleaning areas, chemical manufacturing, waste treatment plants, gas processing plants.\r\u003cbr\u003eSuggested Applications:\r\u003cbr\u003eModbus TCP\/IP lighting networks, remote lighting networks, paint spray booths, aircraft maintenance, oil drilling rigs, refineries, solvent and cleaning areas, gas processing plants, chemical manufacturing, waste treatment plants, gas processing plants.\r\u003cbr\u003esales@larsonelectronics.com\r\u003cbr\u003efor more information about our custom options tailored to meet your specific industry needs.\u003cbr\u003e\u003cbr\u003eSpecifications\u003cbr\u003eNRTL Listed for United States \u0026amp; Canada\u003cbr\u003eUnited States \u0026amp; Canada NRTL Listed for \u003cbr\u003eDimensions:  1.41\" x 3.88\" x 3.1\"\u003cbr\u003eWeight:  55 Lbs.  5 oz\u003cbr\u003eVoltage:  120-277V\u003cbr\u003eTotal Watts: 56 watts (28 Watts Per Lamp) \u003cbr\u003eTotal Lumens: 7,000 (2.875 Per Lamp)\u003cbr\u003eLED Lamp Life Expectancy:  50,000+ Hours\u003cbr\u003eLuminous Efficacy:  125 Lumens per Watt\u003cbr\u003eColor Temp:  5600K, 4500K, 3000K\u003cbr\u003eColor Rendering Index:  \u0026gt;80\u003cbr\u003eBeam Angle:  150°\u003cbr\u003ePower Efficiency:  90%\u003cbr\u003ePower Factor:  \u0026gt;0.95\u003cbr\u003eAmbient Operating Temp Range: -30° C to +85°C\u003cbr\u003eOperating Temp Rating:  T6 Rated\u003cbr\u003eMinimum Operating Temp:  -30°C\u003cbr\u003eMaximum Case Temp:  +90°C\u003cbr\u003eHousing Material:  Cast Aluminum End Caps, Aluminum Reflectors - Copper Free Lexan 940 Polycarbonate Plastic\u003cbr\u003eLens Material:  Hardened Borosilicate Glass Tubes\u003cbr\u003eGasket Material:  Buna Rubber O-Rings\u003cbr\u003eMounting:  Surface Standard - Pendant Optional\u003cbr\u003eWiring Hub:  1\/2\" NPT\u003cbr\u003eDimensions:  1.41\" x 3.88\" x 3.1\"\u003cbr\u003eWeight:  55 Lbs.  5 oz\u003cbr\u003eNetwork Type:  10\/100 Base-T Ethernet Port\u003cbr\u003eProtocols:  HTTP, XML, Modbus TCP\/IP\u003cbr\u003ePower Supply:  9-28V DC\u003cbr\u003eDigital Input:  (1) Optically Isolated 4-26V DC\u003cbr\u003eCurrent:  950uA @ 4V, 8.5mA @ 26V\u003cbr\u003eRelay Contacts:  (1) SPDT - 240V AC\/30V DC Max @ 12A\u003cbr\u003eRelay Modes:  On\/Off or Pulsed\u003cbr\u003ePulse Timer Duration:  0.1 to 86,400 Seconds\u003cbr\u003eInput Functions:  Monitor, Local Relay Control, Remote Relay Control\u003cbr\u003eLED Indicators:  (4) Digital Input Voltage Applied, Relay Coil Energized, Network Linked, Network Activity\u003cbr\u003eOperating Temperature:  -40°C to 57°C\u003cbr\u003eHousing Material:  Cast Aluminum End Caps, Aluminum Reflectors - Copper Free Lexan 940 Polycarbonate Plastic\u003cbr\u003eMount:  Surface, Wall or DIN Rail\u003cbr\u003ePassword Protection:  Yes @ Setup (Base 64 Encoding, 10 Characters)\u003cbr\u003eConnectors:  3-position Removable (Relay- C, NO, NC), 5-position Removable (Power\/Input), 8-pin RJ-45 (Network)\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38393328435381,"sku":"PL3-EPL-ANC-48-2L-LED-D-V2","price":8734.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-ANC-48-2L-LED-D-V2-1.jpg?v=1612061772","url":"https:\/\/getcahits.com\/products\/pl3-epl-anc-48-2l-led-d-v2","provider":"PuriLite","version":"1.0","type":"link"}