{"product_id":"pl3-ledp10w-60et","title":"Trunnion Mount LED Light Emitter - 6, 10-Watt LEDs - 5160 Lumen - 525'L X 80' Spot Beam - Extreme En","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eLEDP10W-60ET LED Light Bar\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eInternal LED Driver Features\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eLamp Type: CREE XLamp MC-E® LED\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eFast average current control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 11\"-L  2.5\"-H   3.5\"-D\u003c\/td\u003e\n\u003ctd\u003eProgrammable off-time switching \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 60\u003c\/td\u003e\n\u003ctd\u003eLinear dimming input \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLed Drive %: 90%\u003c\/td\u003e\n\u003ctd\u003ePWM dimming input \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\nVoltage: 9-46 VDC\nSpot Beam: 525`L x 80`W\nFlood Beam: 180`L x 130`W\n\u003c\/td\u003e\n\u003ctd\u003eShort protection w\/Skip mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: 20° Spot or 40° Flood \u003c\/td\u003e\n\u003ctd\u003eAmbient Op Temp -40C to +125C\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Trunnion \/ U Bracket - Adjustable\u003c\/td\u003e\n\u003ctd\u003ePin-compatible with the HV9910B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: Deutsch IPD \/ LADD DT04-2P connector\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eAmps: 5 (on 12 volts) 2.5 amps (on 24 volts) \u003c\/td\u003e\n\u003ctd\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLumens: 5,160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLED Light Color: 6000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLED Life Expectancy: 50,000 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eOptics Efficiency: 90%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMaterials: Aluminum Housing, Polycarbonate Lens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eHousing Colors: Black or White\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 117px;\"\u003e\nCE Certified \n3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and\/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement.\n\u003c\/td\u003e\n\u003ctd\u003e\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n \n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nBuy American Compliant\nThe LEDP10W-60ET LED Light Bar is ideal for a wide variety of uses including equipment, vehicle, military, law enforcement and industrial manufacturing applications. A 5,160 lumen light output with low voltage and amp draw, 50,000 hour rated service life and 9 to 46 volt compatibility provides operators with a versatile and powerful LED lighting solution. \n \nThe LEDP10W-60ET LED light bar from Larson Electronics produces 5,160 lumens of light while drawing only 60 watts @5 amps from a 12 volt electrical system. Six CREE XLamp MC-E® ten watt LEDs producing 860 lumens each are paired with high purity optics to produce a 20 degree spread spot beam approximately 525’ long by 80’ in width. We also offer floodlight versions with a 40 degree beam spread to provide more light over a larger area nearer the fixture, making flood versions ideal for use as work lights. These LED light bars are waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and applications. \nAn integral Pulse Width Modulation controller, small profile, low power requirements, high durability and versatile mounting system makes these LED light emitters a superior lighting solution for a wide array of applications including but not limited to: military, industrial manufacturing, machine visioning, security and law enforcement, boating, vehicle and commercial structure illumination.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 171px;\"\u003e\n\u003ctable height=\"147\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 127px;\"\u003e\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\nThis photo shows an open field illuminated only by ambient light at approximately 9:00 pm`.\n\n\n\u003c\/td\u003e\n\u003ctd\u003e\nThis particular snapshot shows the LEDP10W-60ET being used to illuminate the field and a sign in the distance.\n\n\n\u003c\/td\u003e\n\u003ctd\u003e\nThis shows the `Larson Electronics` sign, positioned at approx. 475`. The beam does not cut off at the sign, it continues for another 100 or so feet and finally terminates at the hills.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 200px;\"\u003e\nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle” accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.\nPWM Control: The pulse width modulation drivers in this unit also provide secondary benefits through the ability to tap into a provided input wire with an external pulse generator and adjust the duty cycle of the current being applied to the LEDs. Thus, you can connect an external dimmer, switch or pulse control and adjust the perceived output of the light, effectively causing the light to flash, dim or brighten to the desired levels. Additionally, this method of controlling light output results in a corresponding drop in amperage draw, so if the duty cycle is cut back to 50% there will be a matching 50% reduction in amperage draw. These units are also able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LEDP10W series light bars can operate on current ranging from 9 to 46VDC without any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in vehicle electrical systems which would otherwise result in burning up or premature LED failure without it.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n \n\u003ctr\u003e\n\u003ctd style=\"height: 186px;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nDurability: As well as unparalleled heat control, the LEDP10W series of LED light bars from Larson Electronics also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp MC-E® LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use.\n\nAdjustable Mounting: The trunnion wall mounting design on the LEDP10W-60ET allows for post-installation angle positioning. This means that by loosening 2 thumb bolts located on either side of the light, the operator can adjust the positioning angle of this light 270 degrees. Then he\/she would simply have to tighten thumb bolts to lock the angle in place. No tools are required for adjusting angle. We also offer a BC-2 bar clamp mounting system  for even greater mounting versatility.\n\nNote: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD \/ LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high\/low beam, modulating, IR\/Visible combos) will have different Deutsch connectors. \n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 19px;\"\u003eLEDP10W-60ET 40° Flood Beam\n(Opt) \u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eLEDP10W-60ET 20° Wide Spot Beam(Stnd) \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 149px;\"\u003e\n\n\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 380px;\"\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"background-color: #ffff00;\"\u003eCONDITIONS \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable bordercolor=\"#ffffff\" width=\"100%\" border=\"1\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"border-color: #000000; width: 36%;\"\u003eVin min (V) =  9\u003c\/td\u003e\n\u003ctd style=\"border-color: #000000; width: 64%;\"\u003etoff (us) =  2.9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-color: #000000;\"\u003eVin nom (V) =  12\u003c\/td\u003e\n\u003ctd style=\"border-color: #000000;\"\u003eR1 (kohm) =  50.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-color: #000000;\"\u003eVin max (V) =  50\u003c\/td\u003e\n\u003ctd style=\"border-color: #000000;\"\u003eL1 (uH) =  3.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-color: #000000;\"\u003eVo min (V) =  6.5\u003c\/td\u003e\n\u003ctd style=\"border-color: #000000;\"\u003eL-Pk (A) =  2.9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-color: #000000;\"\u003eVo nom (V) =  6.8\u003c\/td\u003e\n\u003ctd style=\"border-color: #000000;\"\u003eL-rms (A) =  2.9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-color: #000000;\"\u003eVo max (V) =  7\u003c\/td\u003e\n\u003ctd style=\"border-color: #000000;\"\u003eIpk (A) =  2.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-color: #000000;\"\u003eI-LED (A) =  2.2\u003c\/td\u003e\n\u003ctd style=\"border-color: #000000;\"\u003eR2 (ohm) =  0.10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-color: #000000;\"\u003eEfficiency =  .85\u003c\/td\u003e\n\u003ctd style=\"border-color: #000000;\"\u003eI-FET (A) =  2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-color: #000000; height: 14px;\"\u003efsw nom (kHz) =  150\u003c\/td\u003e\n\u003ctd style=\"border-color: #000000;\"\u003efs min (kHz) =  77\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-color: #000000; height: 14px;\"\u003eTs nom (us) =  6.666667 \u003c\/td\u003e\n\u003ctd style=\"border-color: #000000;\"\u003efs max (kHz) =  301\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-color: #000000; height: 14px;\"\u003eBase frequency-\u003c\/td\u003e\n\u003ctd style=\"border-color: #000000;\"\u003e=  36~37Khz @ 12V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-color: #000000; height: 14px;\"\u003eAmplitude of pulse width-\u003c\/td\u003e\n\u003ctd style=\"border-color: #000000;\"\u003e=  27Ms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-color: #000000; height: 14px;\"\u003eOutside: External dimmer-\u003c\/td\u003e\n\u003ctd style=\"border-color: #000000;\"\u003e= 500Hz \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-color: #000000; height: 14px;\"\u003eInside :  Current sensing from- \u003c\/td\u003e\n\u003ctd style=\"border-color: #000000;\"\u003e77KHz at 12V to 300KHz at 50V \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\n \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38298285506741,"sku":"PL3-LEDP10W-60ET","price":1458.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LEDP10W-60ET.jpg?v=1628915842","url":"https:\/\/getcahits.com\/es\/products\/pl3-ledp10w-60et","provider":"PuriLite","version":"1.0","type":"link"}