{"title":"Sensors","description":"","products":[{"product_id":"pl4-bok-10324","title":"Building Wireless Sensor Networks","description":"\u003cp\u003eCreate distributed sensor systems and intelligent interactive devices using the ZigBee wireless networking protocol and XBee radios. By the time you're halfway through Rob Faludi's fast-paced, hands-on guide, you'll have built a series of useful projects, including a complete ZigBee wireless network that delivers remotely sensed data. This resource- and reference-packed book is perfect for inventors, hackers, crafters, students, hobbyists, and scientists.\u003c\/p\u003e\n\n\u003cp\u003e**Note:** Check below for the BWSN kit which includes all the pieces you need to work through the examples in this book.\u003c\/p\u003e\n\n\u003cp\u003e**Info:**\u003c\/p\u003e\n\n\u003cp\u003e* Author: Robert Faludi\u003cbr\u003e\n* Publisher: O'Reilly Media, Inc.\u003cbr\u003e\n* Paperback: 320 pages\u003cbr\u003e\n* ISBN-10: 0596807732\u003cbr\u003e\n* ISBN-13: 978-0596807733\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690049323189,"sku":"PL4-BOK-10324","price":68.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/10324-02.jpg?v=1618121055"},{"product_id":"pl4-bok-11133","title":"Electronic Sensor Circuits \u0026 Projects","description":"\u003cp\u003eForrest M. Mims III has written more than sixty books about science, lasers, computers, and electronics. In 1993, He received a prestigious Rolex Award for a simple instrument that he developed to measure the ozone layer. He is a member of the Institute of Electrical and Electronics Engineers (IEEE), the National Science Teachers Association, the Texas Academy of Science and many scientific organizations. When this guy put together a set of electronics reference books, we were excited to get them. The Engineer's Mini Notebook series is a set of four handbooks that lay out, in plain language, the foundation of electrical and electronic knowledge. Our engineer's here at SparkFun cited several things in these books that they remembered learning in school, stuff that turned out being really useful.\u003c\/p\u003e\n\n \u003cp\u003eIn *Electronic Sensor Circuits \u0026amp; Projects* you'll learn about important sensors like solar cells, photoresistors, thermistors, hall-effect devices, and magnet switches. Then use these sensors to build circuits and projects that respond to heat, pressure, light, touch, water, strain, lightning and magnets. You can even make a circuit that detects the presence of the cursor on your computer screen and the position of a compass needle.\u003c\/p\u003e\n\n\u003cp\u003e**Info: **\u003c\/p\u003e\n\n\u003cp\u003e* Author: Forrest M. Mims III\u003cbr\u003e\n* Publisher: Master Publishing, Inc.\u003cbr\u003e\n* Paperback: 144 pages\u003cbr\u003e\n* ISBN-10: 0945053312\u003cbr\u003e\n* ISBN-13: 978-0945053316\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690049650869,"sku":"PL4-BOK-11133","price":45.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/11133-01.jpg?v=1618121061"},{"product_id":"pl4-com-09689","title":"Optical Dust Sensor - GP2Y1010AU0F","description":"\u003cp\u003eSharp's GP2Y1010AU0F is an optical air quality sensor, designed to sense dust particles. An infrared emitting diode and a phototransistor are diagonally arranged into this device, to allow it to detect the reflected light of dust in air. It is especially effective in detecting very fine particles like cigarette smoke, and is commonly used in air purifier systems.\u003c\/p\u003e  \n\n \u003cp\u003eThe sensor has a very low current consumption (20mA max, 11mA typical), and can be powered with up to 7VDC. The output of the sensor is an analog voltage proportional to the measured dust density, with a sensitivity of 0.5V\/0.1mg\/m3.\u003c\/p\u003e  \n\n \u003cp\u003eTo interface with the sensor you need to connect to its 6-pin, 1.5mm pitch connector; we do have a [mating connector](http:\/\/www.sparkfun.com\/commerce\/product_info.php?products_id=9690) for this.\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* 1.81 x 1.18 x 0.69\" (46.0 × 30.0 × 17.6 mm)\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Datasheet](http:\/\/www.sparkfun.com\/datasheets\/Sensors\/gp2y1010au_e.pdf)\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690053550261,"sku":"PL4-COM-09689","price":52.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/09689-01.jpg?v=1618121118"},{"product_id":"pl4-com-17860","title":"Loomia Single Pressure Sensor","description":"\u003cp\u003eThe Loomia Single Pressure Sensor gives you an analog read that maps to force on the sensor. The more you press, the lower the resistance goes, perfect for on-body pressure related sensing like ribcage expansion for breathing. This sensor is small but mighty, making it convenient for small surface area applications.\u003c\/p\u003e\n\n\u003cp\u003eLoomia parts are designed to be easily soldered together, and work well with popular micro controllers like Arduino Nano and Teensy. The system revolves around Loomia's custom interconnect, which allows for a simple connection between buses. The interconnect can be soldered to headers for easy breadboarding. From fabric to wood, Loomia components can stick onto a range of materials, making your prototypes look clean and polished.\u003c\/p\u003e\n\n\u003cp\u003e**Note:** There are a number of operating procedures to be aware of before using Loomia products. This includes directions to not wash or sew any of the parts. Make sure to check the Datasheet in the Documents tab for more information.\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* Bend Radius Limitation: N\/A\u003cbr\u003e\n* Thickness: Approx. 20 mils\u003cbr\u003e\n* Operating Voltage Range: 3.7V - 5V\u003cbr\u003e\n* Pressure Range: 0.5bs. - 10lbs.\u003cbr\u003e\n* Component Dimensions: 2in x 1in\u003cbr\u003e\n* Sensing Area Dimensions: 0.75in x 0.75in\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Datasheet](https:\/\/cdn.sparkfun.com\/assets\/b\/5\/f\/9\/9\/Loomia_Datasheet.pdf)\u003cbr\u003e\n* [Quick Start Guide](https:\/\/cdn.sparkfun.com\/assets\/1\/9\/d\/c\/a\/Loomia_Quick-Start_Guide.pdf)\u003cbr\u003e\n* [Pinout Guide](https:\/\/cdn.sparkfun.com\/assets\/0\/c\/f\/2\/c\/Loomia_Pinout-Guide.pdf)\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690067968181,"sku":"PL4-COM-17860","price":73.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/17860-Loomia_Single_Pressure_Sensor-01.jpg?v=1618121267"},{"product_id":"pl4-dev-16156","title":"Sensor Kit","description":"\u003cp\u003eDo you have a good understanding of various sensors or need a variety of them for a project? The SparkFun Sensor Kit includes a sensor for just about every job. With everything included in this kit, you'll be able to sense gesture, humidity, temperature, motion, touch, sound, altitude, acceleration and more! These are some of our favorite sensors from each category. But wait, there's more! The SparkFun Sensor Kit now includes several of our sensor boards that feature the Qwiic Connect System for rapid prototyping!\u003c\/p\u003e\n\n\u003cp\u003eThis version of the kit has received a complete overhaul! Check out the *Includes* section above for a complete list of what is included in this kit to find out what has changed.\u003c\/p\u003e\n\n\u003cp\u003eThis huge assortment of sensors makes an amazing gift for that very special electronics enthusiast in your life!\u003c\/p\u003e\n\n\u003cp\u003e***\u003c\/p\u003e\n\n\u003cp\u003e*The [SparkFun Qwiic Connect System](https:\/\/www.sparkfun.com\/qwiic) is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you cant hook it up wrong.*\u003c\/p\u003e\n\n\u003cp\u003e***\u003c\/p\u003e\n\n\u003cp\u003e-\u0026gt;\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":39690085728437,"sku":"PL4-DEV-16156","price":189.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/16156-SparkFun_Sensor_Kit-01.jpg?v=1618121479"},{"product_id":"pl4-kit-14409","title":"MyoWare Muscle Sensor Development Kit","description":"\u003cp\u003eUsing our muscles to control things is the way that most of us are accustomed to doing it. We push buttons, pull levers, move joysticks...but what if we could take the buttons, levers and joysticks out of the equation? This is the MyoWare Muscle Sensor Development Kit, an Arduino-powered, electromyography (EMG) sensor kit that provides you with a MyoWare Muscle Sensor, each MyoWare shield, and everything you need to connect them all together.\u003c\/p\u003e \n\n\u003cp\u003eThe MyoWare board included in this kit acts by measuring the filtered and rectified electrical activity of a muscle; outputting 0-Vs Volts depending on the amount of activity in the selected muscle, where Vs signifies the voltage of the power source. It's very simple to hook up this kit, attach shields to the muscle sensor, stick on a few included electrodes, read the voltage out and flex some muscles!\u003c\/p\u003e\n\n\u003cp\u003eAlso included in this kit is everything you need to set up the MyoWare Muscle Sensor: all associated shields (Power, Cable, LED and Proto), biomedical sensor pads and cable, as well as headers that can be soldered onto each shield so they can be attached together. Make sure to take a look at our MyoWare Muscle Sensor Kit Guide below for tips, tricks and best practices for assembling your MyoWare boards.\u003c\/p\u003e \n\n\u003cp\u003eTo make stacking easier, the MyoWare Muscle Sensor Development Kit includes 3-pin stackable headers. Using these on all of the shields allows for easy stacking in more configurations.\u003c\/p\u003e\n\n\u003cp\u003e**Note:** The Power Shield and the LED Shield both provide power, but at slightly different voltages. Don't use both of these shields at the same time.\u003c\/p\u003e\n\n\u003cp\u003e**Note:** This item may take longer to process due to battery installed in the equipment and therefore does not qualify for our [same-day shipping policy](https:\/\/www.sparkfun.com\/support#Same-DayShipping). Additionally, these batteries cannot be shipped via Ground or Economy methods to Alaska or Hawaii. Sorry for any inconvenience this may cause.\u003c\/p\u003e\n\n\u003cp\u003e-\u0026gt;\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690099654837,"sku":"PL4-KIT-14409","price":183.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/14409-01.jpg?v=1618121632"},{"product_id":"pl4-sen-00242","title":"Infrared Proximity Sensor - Sharp GP2Y0A21YK","description":"\u003cp\u003eInfrared proximity sensor made by Sharp. Part # GP2Y0A21YK has an analog output that varies from 3.1V at 10cm to 0.4V at 80cm. The sensor has a Japanese Solderless Terminal (JST) Connector. We recommend purchasing the related pigtail below or soldering wires directly to the back of the module.\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Datasheet](http:\/\/www.sparkfun.com\/datasheets\/Components\/GP2Y0A21YK.pdf)\u003cbr\u003e\n* [Example Code](https:\/\/github.com\/sparkfun\/simple_sketches\/blob\/master\/sharp\/sharp.ino)\u003c\/p\u003e\n\n\u003cp\u003e**Videos**\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690141892789,"sku":"PL4-SEN-00242","price":45.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/00242-1.jpg?v=1618122099"},{"product_id":"pl4-sen-08606","title":"Flex Sensor 4.5\"","description":"\u003cp\u003eA simple flex sensor 4.5\" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original [Nintendo Power Glove](http:\/\/en.wikipedia.org\/wiki\/Power_Glove). I love the Nintendo Power Glove. It's so bad!\u003c\/p\u003e  \n\n \u003cp\u003eThe resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend).\u003c\/p\u003e  \n\n \u003cp\u003eConnector is 0.1\" spaced and bread board friendly. Check datasheet for full specifications.\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Datasheet](https:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/ForceFlex\/FLEXSENSORREVA1.pdf) (FS7548)\u003cbr\u003e\n* [ITP Sensor Workshop](http:\/\/itp.nyu.edu\/archive\/physcomp-spring2014\/sensors\/Reports\/Flex.html)\u003cbr\u003e\n* [Hookup Guide](https:\/\/learn.sparkfun.com\/tutorials\/flex-sensor-hookup-guide)\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690143826101,"sku":"PL4-SEN-08606","price":56.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/08606-03-L.jpg?v=1618122111"},{"product_id":"pl4-sen-08685","title":"FlexiForce Pressure Sensor - 100lbs.","description":"\u003cp\u003eThis is a [piezoresistive](http:\/\/www.google.com\/url?sa=t\u0026amp;ct=res\u0026amp;cd=1\u0026amp;url=http%3A%2F%2Fen.wikipedia.org%2Fwiki%2FPiezoresistor\u0026amp;ei=FGYjSNaOEZy-iAG95Yz_Cw\u0026amp;usg=AFQjCNHosWfJ_XQyNxFpkvc2QhAJ7N88RA\u0026amp;sig2=eqbGReH_y8jIgeMm68ohlA) force sensor from Tekscan. The harder you press, the lower the sensor's resistance. Pressing hard, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pressure is applied to the round area at the end of the sensor. Used as a presence sensor (someone standing), weight sensor, pressure sensor (impact testing), etc.\u003c\/p\u003e  \n\n \u003cp\u003eThe overall length is about 8.5\". Sensor comes with 0.1\" spaced, reinforced, breadboard friendly connector.\u003c\/p\u003e  \n\n \u003cp\u003eThis sensor comes in three flavors. This sensor ranges from 0 to 100lbs of pressure in the mega-ohm range.\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Datasheet](https:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/ForceFlex\/FLX-A201-A.pdf) (ZFLEX A201-100)\u003cbr\u003e\n* [User Manual](https:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/ForceFlex\/FLX-FlexiForce-Sensors-Manual.pdf)\u003cbr\u003e\n* [FlexiForce Pressure Sensor Quick Start Guide ](http:\/\/www.sparkfun.com\/tutorials\/389)\u003cbr\u003e\n* [FlexiForce Homepage](http:\/\/www.tekscan.com\/flexiforce\/flexiforce.html)\u003cbr\u003e\n* [Bildr Tutorial](http:\/\/bildr.org\/2012\/11\/flexiforce-arduino\/)\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690144383157,"sku":"PL4-SEN-08685","price":70.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/08685-03-L.jpg?v=1618122116"},{"product_id":"pl4-sen-08712","title":"FlexiForce Pressure Sensor - 25lbs.","description":"\u003cp\u003eThis is a [piezoresistive](http:\/\/www.google.com\/url?sa=t\u0026amp;ct=res\u0026amp;cd=1\u0026amp;url=http%3A%2F%2Fen.wikipedia.org%2Fwiki%2FPiezoresistor\u0026amp;ei=FGYjSNaOEZy-iAG95Yz_Cw\u0026amp;usg=AFQjCNHosWfJ_XQyNxFpkvc2QhAJ7N88RA\u0026amp;sig2=eqbGReH_y8jIgeMm68ohlA) force sensor from Tekscan. The harder you press, the lower the sensor's resistance. Pressing hard, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pressure is applied to the round area at the end of the sensor. Used as a presence sensor (someone standing), weight sensor, pressure sensor (impact testing), etc.\u003c\/p\u003e  \n\n \u003cp\u003eThe overall length is about 8.5\". Sensor comes with 0.1\" spaced, reinforced, breadboard friendly connector.\u003c\/p\u003e  \n\n \u003cp\u003eThis sensor comes in three flavors. This sensor ranges from 0 to 25lbs of pressure.\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Datasheet](https:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/ForceFlex\/FLX-A201-A.pdf) (ZFLEX A201-25)\u003cbr\u003e\n* [User Manual](https:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/ForceFlex\/FLX-FlexiForce-Sensors-Manual.pdf)\u003cbr\u003e\n* [FlexiForce Pressure Sensor Quick Start Guide](http:\/\/www.sparkfun.com\/tutorials\/389)\u003cbr\u003e\n* [FlexiForce Homepage](http:\/\/www.tekscan.com\/flexiforce\/flexiforce.html)\u003cbr\u003e\n* [Bildr Tutorial](http:\/\/bildr.org\/2012\/11\/flexiforce-arduino\/)\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690144481461,"sku":"PL4-SEN-08712","price":73.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/08685-03-L_24bba086-ebec-46a6-a932-46628000cb15.jpg?v=1618122117"},{"product_id":"pl4-sen-08713","title":"FlexiForce Pressure Sensor - 1lb.","description":"\u003cp\u003eThis is a [piezoresistive](http:\/\/www.google.com\/url?sa=t\u0026amp;ct=res\u0026amp;cd=1\u0026amp;url=http%3A%2F%2Fen.wikipedia.org%2Fwiki%2FPiezoresistor\u0026amp;ei=FGYjSNaOEZy-iAG95Yz_Cw\u0026amp;usg=AFQjCNHosWfJ_XQyNxFpkvc2QhAJ7N88RA\u0026amp;sig2=eqbGReH_y8jIgeMm68ohlA) force sensor from Tekscan. The harder you press, the lower the sensor's resistance. Pressing lightly, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pressure is applied to the round area at the end of the sensor. Used as a presence sensor (someone standing), weight sensor, pressure sensor (impact testing), etc.\u003c\/p\u003e  \n\n \u003cp\u003eThe overall length is about 8.5\". Sensor comes with 0.1\" spaced, reinforced, breadboard friendly connector.\u003c\/p\u003e  \n\n \u003cp\u003eThis sensor comes in three flavors. This sensor ranges from 0 to 1lb of pressure.\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Datasheet](https:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/ForceFlex\/FLX-A201-A.pdf) (ZFLEX A201-1)\u003cbr\u003e\n* [User Manual](https:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/ForceFlex\/FLX-FlexiForce-Sensors-Manual.pdf)\u003cbr\u003e\n* [FlexiForce Pressure Sensor Quick Start Guide](http:\/\/www.sparkfun.com\/tutorials\/389)\u003cbr\u003e\n* [FlexiForce Homepage](http:\/\/www.tekscan.com\/flexiforce\/flexiforce.html)\u003cbr\u003e\n* [Bildr Tutorial](http:\/\/bildr.org\/2012\/11\/flexiforce-arduino\/)\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690144678069,"sku":"PL4-SEN-08713","price":70.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/08685-03-L_c59e8db9-bbb1-4334-b782-eb80c0235a94.jpg?v=1618122119"},{"product_id":"pl4-sen-08958","title":"Infrared Proximity Sensor Long Range - Sharp GP2Y0A02YK0F","description":"\u003cp\u003eInfrared proximity sensor made by Sharp. Part # GP2Y0A02YK0F has an analog output that varies from 2.8V at 15cm to 0.4V at 150cm with a supply voltage between 4.5 and 5.5VDC. The sensor has a Japanese Solderless Terminal (JST) Connector. We recommend purchasing the related pigtail below or soldering wires directly to the back of the module.\u003c\/p\u003e  \n\n \u003cp\u003eThis sensor is great for sensing objects up to 5 feet away!\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Datasheet](https:\/\/www.sparkfun.com\/datasheets\/Sensors\/Infrared\/gp2y0a02yk_e.pdf)\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690144841909,"sku":"PL4-SEN-08958","price":48.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/08958-03-L.jpg?v=1618122120"},{"product_id":"pl4-sen-09569","title":"Humidity Sensor Breakout - HIH-4030","description":"\u003cp\u003eThis is a breakout board for Honeywell's HIH-4030 humidity sensor. The HIH-4030 measures relative humidity (%RH) and delivers it as an analog output voltage. You can connect the output of the sensor directly to an ADC on a microcontroller; and, thanks to the sensor's near linear voltage output, the data is very easy to process.\u003c\/p\u003e  \n\n \u003cp\u003eVoltage applied to the supply pins should be within 4-5.8VDC, and optimally at 5V. The sensor will typically only consume about 200μA.\u003c\/p\u003e  \n\n \u003cp\u003eThis product comes as shown in the picture, with the HIH-4030 soldered onto the breakout board. The pins of the 3-pin header are spaced by 0.1\". \u003cbr\u003e\n \u003cbr\u003e\n-\u0026gt;\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":39690147856565,"sku":"PL4-SEN-09569","price":61.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/09569-02.jpg?v=1618122132"},{"product_id":"pl4-sen-09721","title":"Barometric Pressure Sensor Breakout - MPL115A1","description":"\u003cp\u003eNow mounted on a breakout board, the MPL115A1 is a digital barometer that uses MEMs technology to give accurate pressure measurements between 50kPa and 115kPa. We stock the SPI interface version of the sensor. Average current consumption is 10µA at one measurement per second.\u003c\/p\u003e  \n\n \u003cp\u003eThe sensor outputs both temperature and pressure readings on the SPI bus. See page 3 of the datasheet for information on how to take readings from the pressure sensor.\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* Wide supply voltage range\u003cbr\u003e\n* -40°C to 105°C maximum temperature range\u003cbr\u003e\n* Low power consumption\u003cbr\u003e\n* kPa accuracy* 5x3 mm (1.2mm height)\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Schematic](http:\/\/www.sparkfun.com\/datasheets\/BreakoutBoards\/MPL115A1-Breakout-v12.pdf)\u003cbr\u003e\n* [Eagle Files](http:\/\/www.sparkfun.com\/datasheets\/BreakoutBoards\/MPL115A1-Breakout-v12.zip)\u003cbr\u003e\n* [Datasheet](https:\/\/cdn.sparkfun.com\/assets\/f\/0\/f\/3\/9\/MPL115A1.pdf) (MPL115A1)\u003cbr\u003e\n* [Application Note](https:\/\/cdn.sparkfun.com\/assets\/c\/e\/b\/3\/5\/AN3785.pdf)\u003cbr\u003e\n* [Example Code](http:\/\/www.sparkfun.com\/datasheets\/BreakoutBoards\/MPL115A1-ATmega328Code-8-9-10.zip)\u003cbr\u003e\n* [GitHub](https:\/\/github.com\/sparkfun\/Barometric_Pressure_Sensor_Breakout-MPL115A1\/tree\/V_1.2)\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":39690148118709,"sku":"PL4-SEN-09721","price":47.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/09721-01.jpg?v=1618122135"},{"product_id":"pl4-sen-10167","title":"Humidity and Temperature Sensor - RHT03","description":"\u003cp\u003eThe RHT03 (also known by DHT-22) is a low cost humidity and temperature sensor with a single wire digital interface. The sensor is calibrated and doesn't require extra components so you can get right to measuring relative humidity and temperature.\u003c\/p\u003e\n\n\u003cp\u003e-\u0026gt;\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690148806837,"sku":"PL4-SEN-10167","price":43.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/10167-01.jpg?v=1618122139"},{"product_id":"pl4-sen-10221","title":"Liquid Level Sensor - 8\"","description":"\u003cp\u003eThe eTape Liquid Level Sensor from Milone Technologies is a great way to measure the level of a liquid. It has a resistive output that varies with the level of the fluid. It does away with clunky mechanical floats, and easily interfaces with electronic control systems. The sensor's envelope is compressed by the hydrostatic pressure of the fluid in which it is immersed. This results in a change in resistance that corresponds to the distance from the top of the sensor to the surface of the fluid. The sensor's resistive output is inversely proportional to the height of the liquid: the lower the liquid level, the higher the output resistance; the higher the liquid level, the lower the output resistance.\u003c\/p\u003e\n\n\u003cp\u003e**Note: **These sensors used to have only three pins but they're made with four now. The sensor works the same way as before. See the datasheet for details.\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Datasheet](http:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/ForceFlex\/eTape%20Datasheet%2012110215TC-8_040213.pdf)\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690149036213,"sku":"PL4-SEN-10221","price":88.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/10221-01a.jpg?v=1618122140"},{"product_id":"pl4-sen-10264","title":"Flex Sensor 2.2\"","description":"\u003cp\u003eA simple flex sensor 2.2\" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original [Nintendo Power Glove](http:\/\/en.wikipedia.org\/wiki\/Power_Glove). I love the Nintendo Power Glove. It's so bad!\u003c\/p\u003e  \n\n \u003cp\u003eThe resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend).\u003c\/p\u003e  \n\n \u003cp\u003eConnector is 0.1\" spaced and bread board friendly. Check datasheet for full specifications.\u003c\/p\u003e\n\n\u003cp\u003e**Note:** Please refrain from flexing or straining this sensor at the base. The usable range of the sensor can be flexed without a problem, but care should be taken to minimize flexing outside of the usable range. For best results, securely mount the base and bottom portion and only allow the actual flex sensor to flex.\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Datasheet](https:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/ForceFlex\/FLEX%20SENSOR%20DATA%20SHEET%202014.pdf)\u003cbr\u003e\n* [ITP Sensor Workshop](https:\/\/itp.nyu.edu\/physcomp\/lessons\/sensors-the-basics\/ )\u003cbr\u003e\n* [Quickstart Guide](http:\/\/www.sparkfun.com\/tutorials\/270)\u003c\/p\u003e\n\n\u003cp\u003e**Videos**\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690149200053,"sku":"PL4-SEN-10264","price":42.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/10264-01.jpg?v=1618122142"},{"product_id":"pl4-sen-11005","title":"Non-Invasive Current Sensor - 30A","description":"\u003cp\u003eThis non-invasive current sensor (also known as a \"split core current transformer\") can be clamped around the supply line of an electrical load to tell you how much current is passing through it. It does this by acting as an inductor and responding to the magnetic field around a current-carrying conductor. By reading the amount of current being produced by the coil, you can calculate how much current is passing through the conductor.\u003c\/p\u003e\n\n \u003cp\u003eThis particular current sensor will measure a load up to 30 Amps which makes it great for building your own energy monitor to keep your power usage down, or even building an over-current protection device for an AC load. This sensor does not have a load resistor built in, so in most cases it will be necessary to place a resistor across the output to convert the coil's induced current to a very small measurable voltage.\u003c\/p\u003e\n\n\n\n\n\n\u003cp\u003e**Replaces:**[SEN-10341](http:\/\/www.sparkfun.com\/products\/10341)\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Datasheet](http:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/Current\/ECS1030-L72-SPEC.pdf)\u003cbr\u003e\n* [Environmental Monitoring with the Tessel 2](https:\/\/learn.sparkfun.com\/tutorials\/environmental-monitoring-with-the-tessel-2)\u003cbr\u003e\n* [Arduino Energy Monitor Project](http:\/\/openenergymonitor.org\/emon\/node\/58)\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690150576309,"sku":"PL4-SEN-11005","price":47.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/11005-05a.jpg?v=1618122148"},{"product_id":"pl4-sen-11050","title":"Temperature Sensor - Waterproof (DS18B20)","description":"\u003cp\u003eThis sealed digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface. The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a central microprocessor.\u003c\/p\u003e\n\n\u003cp\u003e**Note:** The pinout for this sensor is as follows: RED=Vcc BLACK=GND WHITE=SIG\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* 3.0-5.5V input voltage\u003cbr\u003e\n* Waterproof\u003cbr\u003e\n* -55°C to+125°C temperature range\u003cbr\u003e\n* ±0.5°C accuracy from -10°C to +85°C\u003cbr\u003e\n* 1 Wire interface\u003cbr\u003e\n* Probe is 7mm in diameter and roughly 26mm long. Overall length (including wire) is 6 feet.\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Datasheet](http:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/Temp\/DS18B20.pdf) (DS18B20)\u003cbr\u003e\n* [Simple Sketch Code](https:\/\/github.com\/sparkfun\/simple_sketches\/tree\/master\/DS18B20)\u003cbr\u003e\n* [mbed Example](http:\/\/mbed.org\/users\/snatch59\/notebook\/onewirecrc\/)\u003c\/p\u003e\n\n\u003cp\u003e**Videos**\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690151297205,"sku":"PL4-SEN-11050","price":42.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/11050-04.jpg?v=1618122150"},{"product_id":"pl4-sen-11084","title":"Altitude\/Pressure Sensor Breakout - MPL3115A2","description":"\u003cp\u003eLife has its ups and downs, so why not measure them? The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm (with oversampling enabled). The sensor outputs are digitized by a high resolution 24-bit ADC and transmitted over I2C, meaning it's easy to interface with most controllers. Pressure output can be resolved with output in fractions of a Pascal, and Altitude can be resolved in fractions of a meter. The device also provides 12-bit temperature measurements in degrees Celsius.\u003c\/p\u003e\n\n \u003cp\u003eThis breakout board makes it easy to prototype using this tiny device by breaking out the necessary pins to a standard 0.1\" spaced header. The board also has all of the passive components needed to get the device functioning, so you can simply connect it to something that talks I2C and get to work!\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* 1.95V to 3.6V Supply Voltage, internally regulated by LDO\u003cbr\u003e\n* 1.6V to 3.6V Digital Interface Supply Voltage\u003cbr\u003e\n* Fully Compensated internally\u003cbr\u003e\n* Direct Reading, Compensated \u003cbr\u003e\n    * Pressure: 20-bit measurement (Pascals)\u003cbr\u003e\n    * Altitude: 20-bit measurement (meters)\u003cbr\u003e\n    * Temperature: 12-bit measurement (degrees Celsius)\u003cbr\u003e\n* Programmable Events\u003cbr\u003e\n* Autonomous Data Acquisition\u003cbr\u003e\n* Resolution down to 1 ft. \/ 30 cm\u003cbr\u003e\n* 32 Sample FIFO\u003cbr\u003e\n* Ability to log data up to 12 days using the FIFO\u003cbr\u003e\n* 1 second to 9 hour data acquisition rate\u003cbr\u003e\n* I2C digital output interface (operates up to 400 kHz)\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Schematic](https:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/Pressure\/MPL3115A2_breakout.pdf)\u003cbr\u003e\n* [Eagle Files](https:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/Pressure\/MPL3115A2_breakout.zip)\u003cbr\u003e\n* [Hookup Guide](https:\/\/learn.sparkfun.com\/tutorials\/mpl3115a2-pressure-sensor-hookup-guide)\u003cbr\u003e\n* [Datasheet](http:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/Pressure\/MPL3115A2.pdf) (MPL3115A2)\u003cbr\u003e\n* [GitHub](https:\/\/github.com\/sparkfun\/MPL3115A2_Breakout\/tree\/V_H1.1_L1.2.0) (Design Files \u0026amp; Example Code)\u003cbr\u003e\n* [GitHub](https:\/\/github.com\/sparkfun\/MPL3115A2_Breakout\/tree\/V_H1.1_L1.2.0\/Libraries\/Arduino) (Library)\u003c\/p\u003e\n\n\u003cp\u003e**Videos**\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":39690151657653,"sku":"PL4-SEN-11084","price":44.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/11084-01.jpg?v=1618122152"},{"product_id":"pl4-sen-11207","title":"FlexiForce Pressure Sensor - 25lbs (1\" area)","description":"\u003cp\u003eThis is a [piezoresistive](http:\/\/www.google.com\/url?sa=t\u0026amp;ct=res\u0026amp;cd=1\u0026amp;url=http%3A%2F%2Fen.wikipedia.org%2Fwiki%2FPiezoresistor\u0026amp;ei=FGYjSNaOEZy-iAG95Yz_Cw\u0026amp;usg=AFQjCNHosWfJ_XQyNxFpkvc2QhAJ7N88RA\u0026amp;sig2=eqbGReH_y8jIgeMm68ohlA) force sensor from Tekscan. The harder you press, the lower the sensor's resistance. Pressing hard, the resistance changes from infinite to ~50k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pressure is applied to the round area at the end of the sensor. Used as a presence sensor (someone standing), weight sensor, pressure sensor (impact testing), etc.\u003c\/p\u003e  \n\n \u003cp\u003eThe overall length is about 2.25\". The sensor comes with a 0.1\" spaced, reinforced, breadboard friendly connector.\u003c\/p\u003e\n\n \u003cp\u003eThis sensor ranges from 0 to 25lbs of pressure.\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Datasheet](http:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/Pressure\/A401-force-sensor.pdf) (ZFLEX A401-25)\u003cbr\u003e\n* [Product Page](http:\/\/www.tekscan.com\/flexiforce\/flexiforce.html)\u003cbr\u003e\n* [Bildr Tutorial](http:\/\/bildr.org\/2012\/11\/flexiforce-arduino\/)\u003cbr\u003e\n* [Quickstart Guide](http:\/\/www.sparkfun.com\/tutorials\/389)\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690152411317,"sku":"PL4-SEN-11207","price":58.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/11207-01.jpg?v=1618122154"},{"product_id":"pl4-sen-11295","title":"Humidity and Temperature Sensor Breakout - HIH6130","description":"\u003cp\u003eIt's not the heat but the humidity that gets you, at least that's what they say. Really, both are important, what you need is a sensor that combines humidity and temperature readings. How about this Honeywell HumidIcon Digital Humidity\/Temperature Sensor?\u003c\/p\u003e\n\n \u003cp\u003eThe HIH6130 is a digital output-type relative humidity (RH) and temperature sensor combined in the same package. This allows the RH measurement to be temperature compensated and provides a second, standalone temperature sensor output.\u003c\/p\u003e\n\n \u003cp\u003eThis breakout board gives you standard 0.1\" spaced headers for each of the pins on this SOIC package, making it a lot easier to prototype your next humidity-sensing application. Communication with the HIH6130 is easily achieved over I2C using libraries like \"Wire.h\"\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* Operating Voltage: 2.3-5.5v\u003cbr\u003e\n* Compensated humidity range: 10-90% RH\u003cbr\u003e\n* Compensated temp. range 5-50°C\u003cbr\u003e\n* True temperature-compensated digital I2C output\u003cbr\u003e\n* Wide operating temperature range allows for use in many applications\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Schematic](http:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/Weather\/HIH6130_Breakout_v10.pdf)\u003cbr\u003e\n* [Eagle Files](http:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/Weather\/HIH6130_Breakout_v10.zip)\u003cbr\u003e\n* [Datasheet](http:\/\/cdn.sparkfun.com\/datasheets\/Prototyping\/1443945.pdf) (HIH6130)\u003cbr\u003e\n* [Hygrometer Reconditioning Note](http:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/Weather\/Hygrometer_ReCon.pdf)\u003cbr\u003e\n* [Arduino Code](http:\/\/www.phanderson.com\/arduino\/hih6130.html)\u003cbr\u003e\n* [I2C Instructions](http:\/\/www.phanderson.com\/arduino\/I2CCommunications.pdf)\u003cbr\u003e\n* [Entering and Using Command Mode](http:\/\/www.phanderson.com\/arduino\/CommandModeInstructions.pdf)\u003cbr\u003e\n* [GitHub](https:\/\/github.com\/sparkfun\/HIH6130_Breakout) (Design Files)\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":39690152771765,"sku":"PL4-SEN-11295","price":65.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/11295-01.jpg?v=1618122155"},{"product_id":"pl4-sen-11574","title":"Pulse Sensor","description":"\u003cp\u003eHeart rate data can be really useful whether you're designing an exercise routine, studying your activity or anxiety levels or just want your shirt to blink with your heart beat. The problem is that heart rate can be difficult to measure. Luckily, the Pulse Sensor Amped can solve that problem!\u003c\/p\u003e\n\n \u003cp\u003eThe Pulse Sensor Amped is a plug-and-play heart-rate sensor for Arduino. It can be used by students, artists, athletes, makers, and game \u0026amp; mobile developers who want to easily incorporate live heart-rate data into their projects.It essentially combines a simple optical heart rate sensor with amplification and noise cancellation circuitry making it fast and easy to get reliable pulse readings. Also, it sips power with just 4mA current draw at 5V so it's great for mobile applications.\u003c\/p\u003e\n\n \u003cp\u003eSimply clip the Pulse Sensor to your earlobe or finger tip and plug it into your 3 *or *5 Volt Arduino and you're ready to read heart rate! The 24\" cable on the Pulse Sensor is terminated with standard male headers so there's no soldering required. Of course Arduino example code is available as well as a Processing sketch for visualizing heart rate data.\u003c\/p\u003e\n\n\u003cp\u003e**Includes:**\u003c\/p\u003e\n\n\u003cp\u003e* Pulse Sensor Board\u003cbr\u003e\n* 24-inch Color-Coded Cable with Standard Male Headers\u003cbr\u003e\n* Ear Clip for Earlobe Heart Rate Measurement\u003cbr\u003e\n* Velcro Finger Strap\u003cbr\u003e\n* Transparent Stickers to Protect Sensor\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* 0.625\" Diameter and 0.125\" Thick\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Schematic](http:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/Biometric\/PulseSensorAmpd%20-%20Schematic.pdf)\u003cbr\u003e\n* [Getting Started Project](https:\/\/github.com\/WorldFamousElectronics\/PulseSensorStarterProject)\u003cbr\u003e\n* [Getting Advanced Code](https:\/\/github.com\/WorldFamousElectronics\/PulseSensor_Amped_Arduino)\u003cbr\u003e\n* [Pulse Sensor Processing Visualizer](https:\/\/github.com\/WorldFamousElectronics\/PulseSensor_Amped_Processing_Visualizer)\u003cbr\u003e\n* [Product Video](https:\/\/www.sparkfun.com\/videos#all\/ZgtvEsSGMJ8\/124)\u003c\/p\u003e\n\n\u003cp\u003e**Videos**\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690153099445,"sku":"PL4-SEN-11574","price":54.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/11574-01.jpg?v=1618122166"},{"product_id":"pl4-sen-12040","title":"Current Sensor Breakout - INA169","description":"\u003cp\u003eThe INA169 is a œhigh-side current monitor, which means that you place a resistor (a œshunt resistor) on the positive power rail and the INA169 measures the voltage drop across that resistor. The INA169 outputs a small current based on the measured voltage drop. If you place a resistor from the output of the INA169 to ground, you can measure the voltage at the output.\u003c\/p\u003e\n\n \u003cp\u003eInput common-mode and power supply voltages are independent and can range from 2.7V to 60V on the INA169 and quiescent (sleep) current is only 60uA.\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Schematic](http:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/Current\/INA169_Breakout.pdf)\u003cbr\u003e\n* [Eagle Files](http:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/Current\/INA169_Breakout.zip)\u003cbr\u003e\n* [Datasheet](http:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/Current\/ina169.pdf) (INA169)\u003cbr\u003e\n* [Hookup Guide](https:\/\/learn.sparkfun.com\/tutorials\/ina169-breakout-board-hookup-guide)\u003cbr\u003e\n* [GitHub](https:\/\/github.com\/sparkfun\/INA169_Breakout)\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":39690154082485,"sku":"PL4-SEN-12040","price":45.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/12040-01.jpg?v=1618122174"},{"product_id":"pl4-sen-12728","title":"Infrared Proximity Sensor Short Range - Sharp GP2Y0A41SK0F","description":"\u003cp\u003eInfrared proximity sensor made by Sharp. Part # GP2Y0A41SK0F has an analog output that varies from 3.1V at 4cm to 0.3V at 30cm with a supply voltage between 4.5 and 5.5VDC. The sensor has a Japanese Solderless Terminal (JST) Connector. We recommend purchasing the related pigtail below or soldering wires directly to the back of the module.\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Datasheet](http:\/\/sharp-world.com\/products\/device\/lineup\/data\/pdf\/datasheet\/gp2y0a41sk_e.pdf)\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690154377397,"sku":"PL4-SEN-12728","price":49.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/08959-03-L.jpg?v=1618122179"},{"product_id":"pl4-sen-12785","title":"ToF Range Finder Sensor - VL6180","description":"\u003cp\u003eThis is the SparkFun \"Time-of-Flight\" Range Finder, a sensor board for the VL6180 distance sensor. Unlike most distance sensors that rely on reflected light intensity or reflected angles to determine range, the VL6180 uses a precise clock to measure the time it takes light to bounce back from a surface. This affords the ToF Range Finder and VL6180 a great benefit over other methods because it can be much more accurate and more immune to noise. Does this technology sound familiar? Well it should, it's the same means cellphones use to detect when the caller is holding their phone to their ear.\u003c\/p\u003e\n\n\u003cp\u003eThe VL6180 from STMicroelectronics is actually a 3-in-1 package that combines an IR emitter, a range sensor, and an ambient light sensor together for you to easily use and communicate with via an I2C interface. The ToF Range Finder is very similar to its breakout cousin with a few important differences. What sets this board apart is this sensor is equipped with an on-board 2.8V regulator, which means if you were to plug in a voltage higher than 2.8V it will be shifted down without worry of damaging your board! Another thing to note is the form factor of the sensor itself. Many small robotics platforms have integrated hole patterns for the long time favorite Sharp IR sensor line. This allows the VL6180 Sensor to be a near drop-in replacement for most Sharp sensors.\u003c\/p\u003e\n\n\u003cp\u003e**Note:** Though the datasheet states the VL6180 measures an absolute range of up to 10cm, we have successfully tested it up to 25cm. The more you know.\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* 2.8V Regulator - Provides the required 2.8V for the sensor\u003cbr\u003e\n* I2C Level Shifter - Provides logic level conversion from 2.8V to VCC\u003cbr\u003e\n* 3-in-1 Module\u003cbr\u003e\n    * IR Emitter\u003cbr\u003e\n    * Range Sensor\u003cbr\u003e\n    * Ambient Light Sensor\u003cbr\u003e\n* Measures absolute range up to 10cm\u003cbr\u003e\n* Gesture Recognition\u003cbr\u003e\n* I2C Interface\u003cbr\u003e\n* Two Programmable GPIO\u003cbr\u003e\n* Sharp Sensor Board Layout\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Schematic](https:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/Proximity\/VL6180_Sensor_v10.pdf)\u003cbr\u003e\n* [Eagle Files](https:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/Proximity\/VL6180_Sensor_v10.zip)\u003cbr\u003e\n* [Hookup Guide](https:\/\/learn.sparkfun.com\/tutorials\/vl6180-hookup-guide)\u003cbr\u003e\n* [Datasheet](https:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/Proximity\/DM00112632.pdf) (VL6180)\u003cbr\u003e\n* [Application Note](https:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/Proximity\/VL6180_ApplicationNote.pdf) (VL6180)\u003cbr\u003e\n* [GitHub](https:\/\/github.com\/sparkfun\/ToF_Range_Finder_Sensor-VL6180\/tree\/V_H1.0_L1.1.0) (Design Files \u0026amp; Example Code)\u003cbr\u003e\n* [GitHub](https:\/\/github.com\/sparkfun\/SparkFun_ToF_Range_Finder-VL6180_Arduino_Library\/tree\/V_1.1.0) (Library)\u003c\/p\u003e\n\n\u003cp\u003e**Videos**\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":39690155032757,"sku":"PL4-SEN-12785","price":60.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/12785-01.jpg?v=1618122186"},{"product_id":"pl4-sen-12787","title":"RGB and Gesture Sensor - APDS-9960","description":"\u003cp\u003eThis is the SparkFun RGB and Gesture Sensor, a small breakout board with a built in APDS-9960 sensor that offers ambient light and color measuring, proximity detection, and touchless gesture sensing. With this RGB and Gesture Sensor you will be able to control a computer, microcontroller, robot, and more with a simple swipe of your hand! This is, in fact, the same sensor that the Samsung Galaxy S5 uses and is probably one of the best gesture sensors on the market for the price.\u003c\/p\u003e\n\n\u003cp\u003eThe APDS-9960 is a serious little piece of hardware with built in UV and IR blocking filters, four separate diodes sensitive to different directions, and an I2C compatible interface. For your convenience we have broken out the following pins: VL (optional power to IR LED), GND (Ground), VCC (power to APDS-9960 sensor), SDA (I2C data), SCL (I2C clock), and INT (interrupt). Each APDS-9960 also has a detection range of 4 to 8 inches (10 to 20 cm).\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* Operational Voltage: 3.3V\u003cbr\u003e\n* Ambient Light \u0026amp; RGB Color Sensing\u003cbr\u003e\n* Proximity Sensing\u003cbr\u003e\n* Gesture Detection\u003cbr\u003e\n* Operating Range: 4-8in (10-20cm)\u003cbr\u003e\n* I2C Interface (I2C Address: 0x39)\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Schematic](https:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/Proximity\/SparkFun_APDS-9960_RGB_and_Gesture_Sensor-v10.pdf)\u003cbr\u003e\n* [Eagle Files](https:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/Proximity\/SparkFun_APDS-9960_RGB_and_Gesture_Sensor-v10.zip)\u003cbr\u003e\n* [Hookup Guide](https:\/\/learn.sparkfun.com\/tutorials\/apds-9960-rgb-and-gesture-sensor-hookup-guide)\u003cbr\u003e\n* [Datasheet](https:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/Proximity\/apds9960.pdf) (APDS-9960)\u003cbr\u003e\n* [GitHub](https:\/\/github.com\/sparkfun\/APDS-9960_RGB_and_Gesture_Sensor\/tree\/V_H1.0_L1.4.2) (Design Files \u0026amp; Example Code)\u003cbr\u003e\n* [GitHub](https:\/\/github.com\/sparkfun\/SparkFun_APDS-9960_Sensor_Arduino_Library\/tree\/V_1.4.2) (Library)\u003cbr\u003e\n* [Product Video](https:\/\/www.sparkfun.com\/videos#all\/wtS-TQUoZgY\/9)\u003c\/p\u003e\n\n\u003cp\u003e**Videos**\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":39690155425973,"sku":"PL4-SEN-12787","price":48.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/12787-01.jpg?v=1618122191"},{"product_id":"pl4-sen-12829","title":"RGB Light Sensor - ISL29125","description":"\u003cp\u003eIf youve had ideas for a project that depends on the ability to sense different spectrums of visible light and react based on those measurements, the ISL29125 breakout board may be just what you need. The ISL29125 breakout board makes it very easy to sense and record the light intensity of the general red, green, and blue spectrums of visible light while rejecting IR from light sources. You can then use these color sensor readings for the purposes of logging and finding patterns, or creatively calculate and make control decisions in your electronic projects.\u003c\/p\u003e\n\n\u003cp\u003eEach pin from the ISL29125 has been broken out to allow you to interface with it, SDA, SCL, 3.3V, GND, and even an optional INT pin is available for use. The ISL29125 Light Sensor operates at 3.3V but if you plan on using this chip with a 5V microcontroller make sure to use a logic level converter.\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* Operating Voltage: 3.3V\u003cbr\u003e\n* Operating Current: 56µA\u003cbr\u003e\n* Selectable Range\u003cbr\u003e\n* I2C (SMBus compatible) Output\u003cbr\u003e\n* ADC Resolution 16 bits\u003cbr\u003e\n* SCL, SDA, INT, 3.3V, \u0026amp; GND Pins Broken Out\u003cbr\u003e\n* 18.4mm x 17.2mm x 2.4mm (0.7\" x 0.6\" x 0.09\")\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Schematic](https:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/LightImaging\/ISL29125%20Breakout-v10.pdf)\u003cbr\u003e\n* [Eagle Files](https:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/LightImaging\/ISL29125%20Breakout-v10.zip)\u003cbr\u003e\n* [Hookup Guide](https:\/\/learn.sparkfun.com\/tutorials\/isl29125-rgb-light-sensor-hookup-guide)\u003cbr\u003e\n* [Datasheet](https:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/LightImaging\/isl29125.pdf) (ISL29125)\u003cbr\u003e\n* [GitHub](https:\/\/github.com\/sparkfun\/ISL29125_Breakout\/tree\/V_H1.0_L1.0.1) (Design Files \u0026amp; Example Code)\u003cbr\u003e\n* [GitHub](https:\/\/github.com\/sparkfun\/SparkFun_ISL29125_Breakout_Arduino_Library\/tree\/V_1.0.1) (Library)\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":39690155557045,"sku":"PL4-SEN-12829","price":33.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/12829-01.jpg?v=1618122194"},{"product_id":"pl4-sen-12862","title":"Essential Sensor Kit","description":"\u003cp\u003eWant to start playing with sensors, but don't know where to begin? This kit includes a variety of basic sensors for any beginner or experienced programmer. With everything included in this kit, you'll be able to sense acceleration, force, vibration, Infrared light, ambient light, temperature, and more! These are some great basic sensors from varying categories.\u003c\/p\u003e\n\n \u003cp\u003eThis huge assortment of sensors makes an amazing gift for that very special electronics geek; they won't be able to thank you enough!\u003c\/p\u003e\n\n\u003cp\u003e**Includes:**\u003c\/p\u003e\n\n\u003cp\u003e* [Triple Axis Accelerometer Breakout - MMA8452Q](https:\/\/www.sparkfun.com\/products\/12756) - Senses acceleration along all three axes, with a range of up to ±3g. Fully analog interface.\u003cbr\u003e\n* [Hall Effect Sensor](https:\/\/www.sparkfun.com\/products\/9312) - Holding a magnet near this sensor will cause the output pin to toggle. This makes for a robust presence sensor.\u003cbr\u003e\n* [Tilt Sensor](https:\/\/www.sparkfun.com\/products\/10289) - A simple AT407 basic tilt switch that can easily be used to detect orientation on your project.\u003cbr\u003e\n* [Piezo Element](https:\/\/www.sparkfun.com\/products\/10293) - These two Piezo elements come in handy when you need to detect vibration or a knock. You can use these for tap or knock sensors pretty easily by reading the voltage on the output.\u003cbr\u003e\n* [Insulated Reed Switch](https:\/\/www.sparkfun.com\/products\/8642) - Senses magnetic fields, makes for a great non-contact switch.\u003cbr\u003e\n* [IR Receiver Diode](https:\/\/www.sparkfun.com\/products\/10266) - The TSOP382 is a miniaturized receiver for infrared remote control systems.\u003cbr\u003e\n* [Infrared LED](https:\/\/www.sparkfun.com\/products\/9349) - This is a very simple, clear infrared LED. These devices operate between 940-950nm and work well for generic IR systems.\u003cbr\u003e\n* [TMP36 - Temperature Sensor](https:\/\/www.sparkfun.com\/products\/10988) - The TMP36 is a low voltage, precision centigrade temperature sensor. It provides a voltage output that is linearly proportional to the Celsius temperature.\u003cbr\u003e\n* [Trimpot 10K with Knob](https:\/\/www.sparkfun.com\/products\/9806) - This 10K trimmable potentiometer has a small knob built right in and it's breadboard friendly to boot!\u003cbr\u003e\n* [0.25\" Magnet Square](https:\/\/www.sparkfun.com\/products\/8643) - Plays nicely with the reed switch. Embed the magnet into stuffed animals or inside a box to create a hidden actuator to the reed switch.\u003cbr\u003e\n* [0.5\" Force Sensitive Resistor](https:\/\/www.sparkfun.com\/products\/9375) - A force sensing resistor with a 0.5\" diameter sensing area. Great for sensing pressure (i.e. if it's being squeezed).\u003cbr\u003e\n* [Mini Photocell](https:\/\/www.sparkfun.com\/products\/9088) - The photocell will vary its resistance based on how much light it's exposed to. Will vary from 1kΩ in the light to 10kΩ in the dark.\u003cbr\u003e\n* [Flex Sensor](https:\/\/www.sparkfun.com\/products\/8606) - As the sensor is flexed, the resistance across the sensor increases. Useful for sensing motion or positioning\u003cbr\u003e\n* [Piezo Buzzer\/Speaker](https:\/\/www.sparkfun.com\/products\/7950) - This is a small 12mm round speaker that operates around the audible 2kHz range. You can use these speakers to create simple music or user interfaces.\u003cbr\u003e\n* [Resistor 1.0M Ohm 1\/6 Watt PTH](https:\/\/www.sparkfun.com\/products\/11853) - Two 1\/6th Watt, +\/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Parts Wishlist](http:\/\/sfe.io\/w85173)\u003c\/p\u003e\n\n\u003cp\u003e**Videos**\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":39690155589813,"sku":"PL4-SEN-12862","price":88.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/12862-01.jpg?v=1618122195"},{"product_id":"pl4-sen-12909","title":"Pressure Sensor Breakout - MS5803-14BA","description":"\u003cp\u003eThis is the MS5803-14BA Pressure Sensor Breakout, a high resolution pressure sensor with both an I2C and SPI interface. This MEMS pressure sensor measures the absolute pressure of the fluid around it which includes air, water, and anything else that acts like a viscous fluid. Depending on how you interpret the data, you can determine altitude, water depth, or any other tasks that require an accurate pressure reading. What makes the MS5803-14BA unique is the the gel membrane and antimagnetic stainless steel cap that protects against 30 bar water pressure.\u003c\/p\u003e\n\n\u003cp\u003eWe have broken out all the pins you need including GND and 3.3V for power, SDA\/SDI and  SCL\/SCLK for an I2C interface and SD0, AD\/CS, and PS for a SPI interface. The MS5803-14BA Breakout offers a resolution range of 1 \/ 0.6 \/ 0.4 \/ 0.3 \/ 0.2 mbar. Be aware that to switch between I2C and SPI interfaces a little bit of soldering between solder pads will be required, check the hookup guide below for more information.\u003c\/p\u003e\n\n\u003cp\u003e***Heads up!*** While the IC is capable of outputting data via I2C and SPI, the Arduino Library and example was only written to output via I2C! You'll need to modify the jumpers on the board for SPI mode by removing solder from the pull-up resistors jumper pads and close the other two jumpers. Additionally, you will need to write a library to communicate with the MS5803 in SPI mode if you plan on using this with Arduino.\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* Operating Voltage - 1.8 to 3.6 V\u003cbr\u003e\n* Peak Supply Current - 1.4 mA\u003cbr\u003e\n* Operating Range - 0 to 14 bar\u003cbr\u003e\n* Resolution - 1 \/ 0.6 \/ 0.4 \/ 0.3 \/ 0.2 mbar\u003cbr\u003e\n* I2C and SPI Interface\u003cbr\u003e\n* Gel Protected\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Schematic](https:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/Weather\/MS5803-14BA_Breakout_v10.pdf)\u003cbr\u003e\n* [Eagle Files](https:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/Weather\/MS5803-14BA_Breakout_v10.zip)\u003cbr\u003e\n* [Hookup Guide](https:\/\/learn.sparkfun.com\/tutorials\/ms5803-14ba-pressure-sensor-hookup-guide)\u003cbr\u003e\n* [Datasheet](https:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/Weather\/ms5803_14ba.pdf) (MS5803-14BA)\u003cbr\u003e\n* [GitHub](https:\/\/github.com\/sparkfun\/MS5803-14BA_Breakout\/tree\/V_H1.0_L1.1.0) (Design Files \u0026amp; Example Code)\u003cbr\u003e\n* [GitHub](https:\/\/github.com\/sparkfun\/SparkFun_MS5803-14BA_Breakout_Arduino_Library\/tree\/V_1.1.0) (Library)\u003c\/p\u003e\n\n\u003cp\u003e**Videos**\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":39690155720885,"sku":"PL4-SEN-12909","price":117.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/12909-01a.jpg?v=1618122197"},{"product_id":"pl4-sen-13162","title":"ZX Distance and Gesture Sensor","description":"\u003cp\u003eThe ZX Distance and Gesture Sensor is a touchless sensor that is capable of looking for simple gestures. Developed in conjunction with [XYZ Interactive](http:\/\/www.xyzinteractive.com), the sensor uses their [GestureSense® technology](http:\/\/www.xyzinteractive.com\/gesturesense\/) to recognize the distance of an object away from the sensor up to about 12 inches (30cm, referred to as the œZ axis) and the location of the object from side to side across the sensor in about a 6-inch (15cm) span, referred to as the œX axis. You will be able to use I2C or UART to communicate with the ZX Sensor via a microcontroller or computer.\u003c\/p\u003e\n\n\u003cp\u003eThe ZX Sensor works by bouncing infrared (IR) beams of light from the two LEDs on either side off of an object above the sensor. The bounced light returns to the receiver in the center of the sensor, and a microcontroller on the back of the sensor interprets the data. With these IR pieces you will easily be able to ascertain both the Z axis and the X axis of an object (hence the name). In addition to providing Z and X axis data about an object, the ZX Sensor is capable of detecting simple gestures. We have also clearly labeled all the pin outs on the board, as well as signifying if they are needed in I2C or UART communication.\u003c\/p\u003e\n\n\u003cp\u003e-\u0026gt;\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690155917493,"sku":"PL4-SEN-13162","price":57.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/13162-01a.jpg?v=1618122201"},{"product_id":"pl4-sen-13285","title":"PIR Motion Sensor (JST)","description":"\u003cp\u003eThis is a simple to use motion sensor. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. If anything moves after that period, the 'alarm' pin will go low.\u003c\/p\u003e  \n\n \u003cp\u003eThis unit works great from 5 to 12V (datasheet shows 12V). You can also install a jumper wire past the 5V regulator on board to make this unit work at 3.3V. Sensor uses 1.6mA@3.3V.\u003c\/p\u003e  \n\n \u003cp\u003eThe alarm pin is an [open collector](http:\/\/en.wikipedia.org\/wiki\/Open_collector) meaning you will need a pull up resistor on the alarm pin. The open drain setup allows multiple motion sensors to be connected on a single input pin. If any of the motion sensors go off, the input pin will be pulled low.\u003c\/p\u003e  \n\n\u003cp\u003eWe've finally updated the connector! Gone is the old \"odd\" connector, now you will find a common 3-pin JST! This makes the PIR Sensor much more accessible for whatever your project may need.\u003c\/p\u003e \n\n\u003cp\u003e* Red = Power\u003cbr\u003e\n* White = Ground\u003cbr\u003e\n* Black = Alarm\u003c\/p\u003e\n\n\u003cp\u003e---\u003c\/p\u003e\n\n\u003cp\u003e-\u0026gt;\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690156146869,"sku":"PL4-SEN-13285","price":39.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/13285-01.jpg?v=1618122207"},{"product_id":"pl4-sen-13676","title":"Atmospheric Sensor Breakout - BME280","description":"\u003cp\u003eThe SparkFun BME280 Atmospheric Sensor Breakout is the easy way to measure barometric pressure, humidity, and temperature readings all without taking up too much space. Basically, anything you need to know about atmospheric conditions you can find out from this tiny breakout. The BME280 Breakout has been design to be used in indoor\/outdoor navigation, weather forecasting, home automation, and even personal health and wellness monitoring.\u003c\/p\u003e\n\n\u003cp\u003eThe on-board BME280 sensor measures atmospheric pressure from 30kPa to 110kPa as well as relative humidity and temperature. The breakout provides a 3.3V SPI interface, a 5V tolerant I2C interface (with pull-up resistors to 3.3V), takes measurements at less than 1mA and idles less than 5µA. The BME280 Breakout board has 10 pins, but no more than six are used at a single time. The left side of the board provide power, ground, and I2C pins. The remaining pins which provide SPI functionality and have another power and ground, are broken out on the other side.\u003c\/p\u003e\n\n\u003cp\u003e**Note:** The breakout does NOT have headers installed and will need to purchased and soldered on yourself. Check the _Recommended Products_ section below for the type of headers we use in the Hookup Guide!\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* Operation Voltage: 3.3V\u003cbr\u003e\n* I2C \u0026amp; SPI Communications Interface\u003cbr\u003e\n* Temp Range: -40C to 85C\u003cbr\u003e\n* Humidity Range: 0 - 100% RH, =-3% from 20-80%\u003cbr\u003e\n* Pressure Range: 30,000Pa to 110,000Pa, relative accuracy of 12Pa, absolute accuracy of 100Pa\u003cbr\u003e\n* Altitude Range: 0 to 30,000 ft (9.2 km), relative accuracy of 3.3 ft (1 m) at sea level, 6.6 (2 m) at 30,000 ft.\u003cbr\u003e\n* Incredibly Small\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Schematic](https:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/Weather\/SparkFun_BME280_Breakout_v10.pdf)\u003cbr\u003e\n* [Eagle Files](https:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/Weather\/SparkFun_BME280_Breakout_v10.zip)\u003cbr\u003e\n* [Hookup Guide](https:\/\/learn.sparkfun.com\/tutorials\/sparkfun-bme280-breakout-hookup-guide)\u003cbr\u003e\n* [Datasheet](https:\/\/cdn.sparkfun.com\/assets\/learn_tutorials\/4\/1\/9\/BST-BME280_DS001-10.pdf)\u003cbr\u003e\n* [GitHub](https:\/\/github.com\/sparkfun\/SparkFun_BME280_Breakout_Board) (Design Files)\u003cbr\u003e\n* [GitHub](https:\/\/github.com\/sparkfun\/SparkFun_BME280_Arduino_Library) (Library \u0026amp; Example Code)\u003cbr\u003e\n* [Product Video](https:\/\/www.sparkfun.com\/videos#all\/9-TFbvPKidA\/33)\u003c\/p\u003e\n\n\u003cp\u003e**Videos**\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":39690157359285,"sku":"PL4-SEN-13676","price":65.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/13676-01.jpg?v=1618122217"},{"product_id":"pl4-sen-13679","title":"Current Sensor Breakout - ACS723","description":"\u003cp\u003eThe SparkFun Current Sensor Breakout is a high accuracy board that utilizes the ACS723 for moderate AC and DC current sensing applications. The ACS723 sensor uses a Hall effect sensor to output a voltage relative to the current flowing through the IP+ and IP- pins on the board. The advantage of using a Hall effect sensor, specifically, is that the circuit being sensed and the circuit reading the sensor are electrically isolated meaning that, although your Arduino is running on 5V, the sensed circuit can be operating at higher DC or AC voltages!\u003c\/p\u003e\n\n\u003cp\u003eThe SparkFun Current Sensor Breakout measures both DC and AC currents all the way up to 5A, has full electrical isolation of measured and sensed circuits, and has a base sensitivity of 400mV\/A. Although the analog output is adjustable to 80kHz, the bandwidth on the ACS723 Sensor Breakout width filter has been set to 20kHz to reduce noise when using at high gains. The full 80KHz bandwidth that the sensor is capable of can be recovered by closing the JP1 (Bandwidth Select) jumper on the back of the board.\u003c\/p\u003e\n\n\u003cp\u003e**Note:** Although the chip itself is rated for up to 2.4kV (RMS) of isolation, the board has not been designed for such high voltage applications.\u003c\/p\u003e\n\n\u003cp\u003e-\u0026gt;\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":39690157392053,"sku":"PL4-SEN-13679","price":37.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/13679-SparkFun_Current_Sensor_Breakout_-_ACS723-01.jpg?v=1618122219"},{"product_id":"pl4-sen-13723","title":"MyoWare Muscle Sensor","description":"\u003cp\u003eUsing our muscles to control things is the way that most of us are accustomed to doing it. We push buttons, pull levers, move joysticks... but what if we could take the buttons, levers and joysticks out of the equation? This is the MyoWare Muscle Sensor, an Arduino-powered, all-in-one electromyography (EMG) sensor from Advancer Technologies. The MyoWare board acts by measuring the filtered and rectified electrical activity of a muscle; outputting 0-Vs Volts depending the amount of activity in the selected muscle, where Vs signifies the voltage of the power source. It's that easy: stick on a few electrodes (not included), read the voltage out and flex some muscles!\u003c\/p\u003e\n\n\u003cp\u003eThe MyoWare Muscle Sensor is the latest revision of the Muscle Sensor of old, now with a new wearable design that allows you to attach [biomedical sensor pads](https:\/\/www.sparkfun.com\/products\/12969) directly to the board itself getting rid of those pesky cables. This new board also includes a slew of other new features including, single-supply voltage of +3.1V to +5V, RAW EMG output, polarity protected power pins, indicator LEDs, and (finally) an On\/Off switch. Additionally, we have developed a few shields ([Cable](https:\/\/www.sparkfun.com\/products\/13687), [Power](https:\/\/www.sparkfun.com\/products\/13684), and [Proto](https:\/\/www.sparkfun.com\/products\/13709)) that can attach to the Myoware Muscle Sensor to help increase its versatility and functionality!\u003c\/p\u003e\n\n\u003cp\u003eMeasuring muscle activity by detecting its electric potential, referred to as electromyography (EMG), has traditionally been used for medical research. However, with the advent of ever shrinking yet more powerful microcontrollers and integrated circuits, EMG circuits and sensors have found their way into all kinds of control systems.\u003cbr\u003e\n \u003cbr\u003e\n**Note:** Biomedical sensor pads can be found in the _Recommended Products_ section below to be purchased separately.\u003c\/p\u003e\n\n\u003cp\u003e-\u0026gt;\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690157424821,"sku":"PL4-SEN-13723","price":84.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/13723-MyoWare_Muscle_Sensor-02.jpg?v=1618122220"},{"product_id":"pl4-sen-13835","title":"SST Liquid Level Sensor","description":"\u003cp\u003eThe SST Liquid Level Sensor provides single point liquid detection via a TTL compatible push\/pull output. This optical liquid level sensor features a miniature design that allows for installation in areas where space is limited. Thanks to its minimal solid state design, this sensor has been built without moving or mechanical parts that can be jammed and stop working.\u003c\/p\u003e\n\n\u003cp\u003eAn infra-red LED and phototransistor accurately positioned at the base of the sensing tip ensure good optical coupling between the two when the sensor is in air. When the sensing tip is immersed in liquid, the infra-red light escapes from the cone, causing a change in the amount of light present at the phototransistor, which makes the output change state.\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* Supply Voltage: +4.5 Vdc to +15.4Vdc\u003cbr\u003e\n* Output Current: 100mA\u003cbr\u003e\n* Temperature Range: -25 to +80°C\u003cbr\u003e\n* Polysulphone Housing Tip\u003cbr\u003e\n* M12 threaded connector (mounted from outside)\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Datasheet](https:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/Infrared\/DS0141rev1_LLDigital-LLC200D3SH-LLPK1.pdf)\u003c\/p\u003e\n\n\u003cp\u003e**Videos**\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690157752501,"sku":"PL4-SEN-13835","price":57.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/13835-01.jpg?v=1618122222"},{"product_id":"pl4-sen-13944","title":"9DoF Sensor Stick","description":"\u003cp\u003eThe SparkFun 9DoF Sensor Stick is an easy-to-use 9 Degrees of Freedom IMU. The Sensor Stick deftly utilizes the LSM9DS1 motion-sensing system-in-a-chip, the same IC used in the [SparkFun 9DoF IMU Breakout](https:\/\/www.sparkfun.com\/products\/13284). It houses a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer “ nine degrees of freedom (9DoF) in a single IC!\u003c\/p\u003e \n\n\u003cp\u003eThe onboard LSM9DS1 from STMicroelectronics is equipped with a digital interface, but even that is flexible. The biggest difference between the two boards, besides the slimmed down 0.9\"x0.4\" footprint, is the number of broken-out pins, with the Sensor Stick featuring only four for quick setup and ease of use.\u003c\/p\u003e\n\n\u003cp\u003eThe LSM9DS1 is one of only a handful of ICs that can measure three key properties of movement “ angular velocity, acceleration and heading “ in a single IC. By measuring these three properties, you can gain a great deal of knowledge about an objects movement and orientation. The LSM9DS1 measures each of these movement properties in three dimensions. That means it produces nine pieces of data: acceleration in x\/y\/z, angular rotation in x\/y\/z, and magnetic force in x\/y\/z.\u003c\/p\u003e\n\n\u003cp\u003eEach sensor in the LSM9DS1 supports a wide spectrum of ranges: the accelerometers scale can be set to ± 2, 4, 8, or 16g, the gyroscope supports ± 245, 500, and 2000°\/s, and the magnetometer has full-scale ranges of ± 4, 8, 12, or 16 gauss.\u003c\/p\u003e\n\n\u003cp\u003e-\u0026gt;\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":39690157916341,"sku":"PL4-SEN-13944","price":52.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/13944-01.jpg?v=1618122225"},{"product_id":"pl4-sen-14209","title":"Pocket Geiger Radiation Sensor - Type 5","description":"\u003cp\u003eThe Type 5 Pocket Geiger Radiation Sensor from [Radiation Watch](http:\/\/www.Radiation-Watch.org) is a highly sensitive radiation sensor designed for the embedded systems market. Capable of detecting Gamma and Beta radiation, this sensor has a simple pulsed output that can be used with any microcontroller. Radiation Watch has a handful of documents and example Arduino code to get you up and running. They have also written a Windows example program in C# (source included!) to output graphs to a computer using an Arduino as the reader.\u003c\/p\u003e\n\n\u003cp\u003eThese small Geiger sensors feature a measurement range of 0.05uSv\/h to 10mSv\/h at 0.01cpm to 300Kcpm with a required measurement time of two minutes. The Pocket Geiger has an onboard DC boost circuit, so the board can be supplied with a friendly 3V to 9V. Using only 30mW (10mA @ 3V), it is very low power. Additionally, the counter comes with an optional enclosure and 3.5mm cable.\u003c\/p\u003e\n\n\u003cp\u003e**Note:** This product is for educational purposes and should not be directly relied upon for determinations regarding ones health or safety.\u003c\/p\u003e\n\n\u003cp\u003e**Includes:**\u003c\/p\u003e\n\n\u003cp\u003e* Type5 Geiger Sensor board with copper EM shielding\u003cbr\u003e\n* Brass plates (attach to block beta particles)\u003cbr\u003e\n* 16 TRRS cable\u003cbr\u003e\n* Plastic enclosure\u003cbr\u003e\n* Extra 3.5mm TRRS jack\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* 58 x 26 x 11mm\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Schematic](https:\/\/cdn.sparkfun.com\/assets\/learn_tutorials\/1\/4\/3\/GeigerCounterType5_circuit_diagram.pdf)\u003cbr\u003e\n* [Datatsheet](https:\/\/cdn.sparkfun.com\/assets\/learn_tutorials\/1\/4\/3\/X100-7_SMD_501401.pdf) (X100-7)\u003cbr\u003e\n* [Interface Specification and Pinout](https:\/\/cdn.sparkfun.com\/assets\/learn_tutorials\/1\/4\/3\/GeigerCounterType5_testpin_specification.pdf)\u003cbr\u003e\n* [Example Arduino Sketch](https:\/\/cdn.sparkfun.com\/assets\/learn_tutorials\/1\/4\/3\/PocketGeigerArduinoExample.zip)\u003cbr\u003e\n* [Arduino Hookup](https:\/\/cdn.sparkfun.com\/assets\/learn_tutorials\/1\/4\/3\/GeigerCounterType5_connect_with_arduino.pdf)\u003cbr\u003e\n* [Microcontroller Hookup](https:\/\/cdn.sparkfun.com\/assets\/learn_tutorials\/1\/4\/3\/GeigerCounterType5_connect_with_microcomputer.pdf)\u003cbr\u003e\n* [Windows C# Example Program](https:\/\/cdn.sparkfun.com\/assets\/learn_tutorials\/1\/4\/3\/PokegaMonitor.zip)\u003cbr\u003e\n* [Certification](https:\/\/cdn.sparkfun.com\/assets\/learn_tutorials\/1\/4\/3\/GeigerCounterType5_Certification_VSL_cert_3320408.pdf)\u003cbr\u003e\n* [Product Page](http:\/\/www.radiation-watch.org\/2011\/05\/professional.html#emb)\u003c\/p\u003e\n\n\u003cp\u003e**Videos**\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690158538933,"sku":"PL4-SEN-14209","price":164.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/14209-01.jpg?v=1618122232"},{"product_id":"pl4-sen-14347","title":"Spectral Sensor Breakout - AS7262 Visible (Qwiic)","description":"\u003cp\u003eThe SparkFun AS7262 Visible Spectral Sensor Breakout brings spectroscopy to the palm of your hand, making it easier than ever to measure and characterize how different materials absorb and reflect different wavelengths of light. The AS7262 Breakout is unique in its ability to communicate by both an I2C interface and serial interface using AT commands. Hookup is easy, thanks to the Qwiic connectors attached to the board --- simply plug one end of the Qwiic cable into the breakout and the other into one of the Qwiic Shields, then stack the board on a development board. Youll be ready to upload a sketch to start taking spectroscopy measurements in no time.\u003c\/p\u003e\n\n\u003cp\u003eThe AS7262 spectrometer detects wavelengths in the visible range at 450, 500, 550, 570, 600 and 650nm of light each with 40nm of full-width half-max detection. The board also has multiple ways for you to illuminate objects that you will try to measure for a more accurate spectroscopy reading. There is an onboard LED that has been picked out specifically for this task, as well as two pins to solder your own LED into.\u003c\/p\u003e\n\n\u003cp\u003e**NOTE:** The I2C address of the AS7262 is 0x49 and is hardware defined. A multiplexer\/Mux is required to communicate to multiple AS7262 sensors on a single bus. If you need to use more than one AS7262 sensor consider using the [Qwiic Mux Breakout](https:\/\/www.sparkfun.com\/products\/16784).\u003c\/p\u003e\n\n\u003cp\u003e***\u003c\/p\u003e\n\n\u003cp\u003e*The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you cant hook it up wrong.*\u003c\/p\u003e\n\n\u003cp\u003e***\u003c\/p\u003e\n\n\u003cp\u003e-\u0026gt;\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":39690159161525,"sku":"PL4-SEN-14347","price":56.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/14347-01.jpg?v=1618122237"},{"product_id":"pl4-sen-14349","title":"Human Presence Sensor Breakout - AK9753 (Qwiic)","description":"\u003cp\u003eThis is not your normal Passive Infrared (PIR) sensor! The SparkFun AK9753 Human Presence Sensor Breakout is a Qwiic-enabled, 4-channel Nondispersive Infrared (NDIR) sensor. Each channel has a different field of view, so not only can the AK9753 detect a human, but it can also tell which direction the person is moving. To make it even easier to use this breakout, all communication is enacted exclusively via I2C, utilizing our handy Qwiic system. However, we still have broken out 0.1\" spaced pins in case you prefer to use a breadboard.\u003c\/p\u003e\n\n\u003cp\u003eThe onboard AK9753 is a digital sensor giving you a 16-bit digital value over I2C. Each of the four sensors outputs the IR current in pico-amps. A PIR reading can vary from roughly -200 (no human present) to 1500 when a human is detected standing in front of a given channel, but it varies due to environmental factors and other heat sources in view. Weve written a full library to control the sensor and included examples showing how to output the sensor readings you need, making this breakout even easier to handle!\u003c\/p\u003e\n\n\u003cp\u003e**NOTE:** The I2C address of the AK9753 is 0x64 and is jumper selectable to 0x65 or 0x67. A multiplexer\/Mux is required to communicate to multiple AK9753 sensors on a single bus. If you need to use more than one AK9753 sensor consider using the [Qwiic Mux Breakout](https:\/\/www.sparkfun.com\/products\/16784).\u003c\/p\u003e\n\n\u003cp\u003e***\u003c\/p\u003e\n\n\u003cp\u003e*The SparkFun Qwiic connect system is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you cant hook it up wrong.*\u003c\/p\u003e\n\n\u003cp\u003e***\u003c\/p\u003e\n\n\u003cp\u003e-\u0026gt;\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":39690159456437,"sku":"PL4-SEN-14349","price":60.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/14349-01.jpg?v=1618122240"},{"product_id":"pl4-sen-14351","title":"Spectral Sensor Breakout - AS7263 NIR (Qwiic)","description":"\u003cp\u003eThe SparkFun AS7263 Near Infrared (NIR) Spectral Sensor Breakout brings spectroscopy to the palm of your hand, making it easier than ever to measure and characterize how different materials absorb and reflect different wavelengths of light. The AS7263 Breakout is unique in its ability to communicate by both an I2C interface and serial interface using AT commands. Hookup is easy, thanks to the Qwiic connectors attached to the board --- simply plug one end of the Qwiic cable into the breakout and the other into one of the Qwiic shields, then stack the board on a development board. Youll be ready to upload a sketch to start taking spectroscopy measurements in no time.\u003c\/p\u003e\n\n\u003cp\u003eThe AS7263 spectrometer detects wavelengths in the visible range at 610, 680, 730, 760, 810 and 860nm of light, each with 20nm of full-width half-max detection. The board also has multiple ways for you to illuminate objects that you will try to measure for a more accurate spectroscopy reading. There is an onboard LED that has been picked out specifically for this task, as well as two pins to solder your own LED into.\u003c\/p\u003e\n\n\u003cp\u003e**NOTE:** The I2C address of the AS7263 is 0x49 and is hardware defined. A multiplexer\/Mux is required to communicate to multiple AS7263 sensors on a single bus. If you need to use more than one AS7263 sensor consider using the [Qwiic Mux Breakout](https:\/\/www.sparkfun.com\/products\/16784).\u003c\/p\u003e\n\n\u003cp\u003e***\u003c\/p\u003e\n\n\u003cp\u003e*The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you cant hook it up wrong.*\u003c\/p\u003e\n\n\u003cp\u003e***\u003c\/p\u003e\n\n\u003cp\u003e-\u0026gt;\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":39690159587509,"sku":"PL4-SEN-14351","price":56.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/14351-01.jpg?v=1618122242"},{"product_id":"pl4-sen-14544","title":"Current Sensor Breakout - ACS723 (Low Current)","description":"\u003cp\u003eThe low current version of the SparkFun Current Sensor Breakout is a high accuracy board that utilizes the ACS723 for low to moderate AC and DC current sensing applications. The ACS723 sensor uses a Hall effect sensor to output a voltage relative to the current flowing through the IP+ and IP- pins on the board. The advantage of using a Hall effect sensor, specifically, is that the circuit being sensed and the circuit reading the sensor are electrically isolated meaning that, although your Arduino is running on 5V, the sensed circuit can be operating at higher DC or AC voltages!\u003c\/p\u003e\n\n\u003cp\u003eThis low current sensor breakout is capable of sensing very small currents down to around 10mA and large currents up to 5A! However, since the output is analog, your usable readings will be limited by noise and the resolution of the ADC reading the output. Additionally, this breakout has full electrical isolation of measured and sensed circuits and (thanks to an on-board amp) can adjust its sensitivity. Although the analog output is adjustable to 80kHz, the bandwidth on the ACS723 Sensor Breakout width filter has been set to 20kHz to reduce noise when using at high gains. The full 80KHz bandwidth that the sensor is capable of can be recovered by closing the JP1 (Bandwidth Select) jumper on the back of the board.\u003c\/p\u003e\n\n\u003cp\u003e**Note:** Although the chip itself is rated for up to 2.4kV (RMS) of isolation, the board has not been designed for such high voltage applications.\u003c\/p\u003e\n\n\u003cp\u003e-\u0026gt;\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":39690161094837,"sku":"PL4-SEN-14544","price":52.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/14544-SparkFun_Current_Sensor_Breakout_-_ACS723__Low_Current_-01.jpg?v=1618122246"},{"product_id":"pl4-sen-14722","title":"Distance Sensor Breakout - 4 Meter, VL53L1X (Qwiic)","description":"\u003cp\u003eThis SparkFun Distance Sensor Breakout utilizes the VL53L1X next generation ToF (Time of Flight) sensor module to give you the highly accurate measurements at long ranges for its size. The VL53L1X from STMicroelectronics uses a VCSEL (Vertical Cavity Surface Emitting Laser) to emit an Infrared laser to time the reflection to the target. That means that you will be able to measure the distance to an object from 40mm to 4m away with millimeter resolution! To make it even easier to get your readings, all communication is enacted exclusively via I2C, utilizing our handy Qwiic system so no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1-spaced pins in case you prefer to use a breadboard.\u003c\/p\u003e\n\n\u003cp\u003eEach VL53L1X sensor features a precision to be 1mm with an accuracy around +\/-5mm and a minimum read distance of this sensor is 4cm. The field of view for this little breakout is fairly narrow at 15°-27° with a read rate of up to 50Hz. Make sure to power this board appropriately since it will need 2.6V-3.5V to operate. Lastly, please be sure to remove the protective sticker on the VL53L1X before use otherwise it will, most assuredly, throw off your readings.\u003c\/p\u003e\n\n\u003cp\u003e**NOTE:** The I2C address of the VL53L1X is 0x29 and is hardware defined. A multiplexer\/Mux is required to communicate to multiple VL53L1X sensors on a single bus. If you need to use more than one VL53L1X sensor consider using the [Qwiic Mux Breakout](https:\/\/www.sparkfun.com\/products\/16784).\u003c\/p\u003e\n\n\u003cp\u003e**Note:** [CLASS 1](http:\/\/en.wikipedia.org\/wiki\/Laser_safety#Class_1) LASER PRODUCT CLASSIFIED IEC 60825-1 2014.\u003c\/p\u003e\n\n\u003cp\u003e***\u003c\/p\u003e\n\n\u003cp\u003e*The [SparkFun Qwiic Connect System](https:\/\/www.sparkfun.com\/qwiic) is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you cant hook it up wrong.*\u003c\/p\u003e\n\n\u003cp\u003e*The VL53L1X Distance Sensor Breakout can also be automatically detected, scanned, configured, and logged using the [OpenLog Artemis](https:\/\/www.sparkfun.com\/products\/16832) datalogger system. No programming, soldering, or setup required!*\u003c\/p\u003e\n\n\u003cp\u003e***\u003c\/p\u003e\n\n\u003cp\u003eNeed a custom board? This component can be found in SparkFun's à La Carte board builder. You can have a custom design fabricated with this component - and your choice of hundreds of other sensors, actuators and wireless devices - delivered to you in just a few weeks.\u003c\/p\u003e\n\n\n\n    \n\n\n\n\n\u003cp\u003e***\u003c\/p\u003e\n\n\u003cp\u003e-\u0026gt;\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":39690162503861,"sku":"PL4-SEN-14722","price":71.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/14722-SparkFun_Distance_Sensor_Breakout-_4_Meter__VL53L1X__Qwiic_-01.jpg?v=1618122260"},{"product_id":"pl4-sen-15050","title":"Triad Spectroscopy Sensor - AS7265x (Qwiic)","description":"\u003cp\u003eThe SparkFun Triad Spectroscopy Sensor is a powerful optical inspection sensor also known as a *spectrophotometer*. Three AS7265x spectral sensors are combined alongside a visible, UV, and IR LEDs to illuminate and test various surfaces for light spectroscopy. The Triad is made up of three sensors; the AS72651, the AS72652, and the AS72653 and can detect the light from 410nm (UV) to 940nm (IR). In addition, 18 individual light frequencies can be measured with precision down to 28.6 nW\/cm2 and accuracy of +\/-12%. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1\"-spaced pins in case you prefer to use a breadboard.\u003c\/p\u003e\n\n\u003cp\u003eThe SparkFun Triad Spectroscopy Sensor communicates over I2C by default or over 115200bps serial. We've written a fully formed Arduino library to access all the various features include taking readings and illuminating LEDs all over the Qwiic I2C interface. In addition, the Triad can be setup to communicate over serial. The serial interface uses an AT command set.\u003c\/p\u003e\n\n\u003cp\u003eWhat can you do with light spectroscopy? Its an amazing field of study, and the SparkFun Triad brings what used to be prohibitively expensive equipment to the desktop. The AS7265x should not be confused with highly complex photon spectrometers, but the sensor array does give the user the ability to measure and characterize how different materials absorb and reflect 18 different frequencies of light. We've also written a full Arduino library that makes reading and interacting with the Triad simple and easy!\u003c\/p\u003e \n\n\u003cp\u003e**NOTE:** The I2C address of the AS7265x is 0x49 and is hardware defined. A multiplexer\/Mux is required to communicate to multiple AS7265x sensors on a single bus. If you need to use more than one AS7265x sensor consider using the [Qwiic Mux Breakout](https:\/\/www.sparkfun.com\/products\/16784).\u003c\/p\u003e\n\n\u003cp\u003e***\u003c\/p\u003e\n\n\u003cp\u003e*The SparkFun [Qwiic](https:\/\/www.sparkfun.com\/qwiic) Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you cant hook it up wrong.*\u003c\/p\u003e\n\n\u003cp\u003e***\u003c\/p\u003e\n\n\u003cp\u003e-\u0026gt;\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":39690164994229,"sku":"PL4-SEN-15050","price":140.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/15050-SparkFun_Triad_Spectroscopy_Sensor_-_AS7265x__Qwiic_-01.jpg?v=1618122277"},{"product_id":"pl4-sen-15103","title":"Particulate Matter Sensor - SPS30","description":"\u003cp\u003eThe Sensirion Particulate Matter Sensor SPS30 is a compact, high quality, optical particle sensor that uses laser scattering and Sensirion's innovative contamination resistance technology to achieve superior binning and particle measurement. This sensor allows users to measure mass concentration and number of particles of 1 µg\/m^3, 2.5 µg\/m^3, 4 µg\/m^3, and 10 µg\/m^3.\u003c\/p\u003e \n\n\u003cp\u003eThe compact form factor, measuring just under 41mm x 41mm x 12mm, combined with a sensor lifetime over 8 years and a self cleaning procedure, makes the SPS30 the perfect sensor for projects in difficult to access locations. We've designed and included an easy to use 5-pin cable to make using the SPS30 a snap. The 1.5mm connector is broken out to 5 breadboard friendly wires color coded to make hooking up the SPS30 easy.\u003c\/p\u003e\n\n\u003cp\u003eThe SPS30 has a five pin interface that can communicate over two different protocols: UART and I2C. The SPS30 requires a 5V power supply, but can work with 3.3V and 5V microcontrollers. The logic is 5V and 3.3V tolerant.\u003c\/p\u003e \n\n\u003cp\u003eSensirion has written drivers for both the [UART protocol](https:\/\/github.com\/Sensirion\/embedded-uart-sps) and [I2C](https:\/\/github.com\/Sensirion\/embedded-sps). Unfortunately we've found the I2C is limited to only mass concentrations (not number concentrations) using the Arduino platform. So if you plan to use this sensor with an Arduino, use the UART interface. Both interfaces are described in their [datasheet](https:\/\/cdn.sparkfun.com\/assets\/4\/e\/e\/f\/8\/Sensirion_PM_Sensors_Datasheet_SPS30.pdf).\u003c\/p\u003e\n\n\u003cp\u003e**Includes:**\u003c\/p\u003e\n\n\u003cp\u003e* SPS30 Sensor\u003cbr\u003e\n* 5-pin 150mm Interface Cable\u003cbr\u003e\n  * Red: 5V\u003cbr\u003e\n  * White: SDA\/RX\u003cbr\u003e\n  * Purple: SCL\/TX\u003cbr\u003e\n  * Green: SEL (Connect to GND for I2C)\u003cbr\u003e\n  * Black: GND\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Sensirion SPS30 Datasheet](https:\/\/cdn.sparkfun.com\/assets\/4\/e\/e\/f\/8\/Sensirion_PM_Sensors_Datasheet_SPS30.pdf)\u003cbr\u003e\n* [Design-In Guide](https:\/\/cdn.sparkfun.com\/assets\/4\/6\/0\/6\/1\/SPS30_Mechanical_Design_and_Assembly_Guidelines_v1.0_D1.pdf)\u003cbr\u003e\n* [Low Power Operation App Note](https:\/\/cdn.sparkfun.com\/assets\/1\/6\/a\/c\/0\/SPS30_Low_Power_Operation_D1.pdf)\u003cbr\u003e\n* [Sensirion UART driver](https:\/\/github.com\/Sensirion\/embedded-uart-sps)\u003cbr\u003e\n* [Sensirion I2C driver](https:\/\/github.com\/Sensirion\/embedded-sps) (not fully compatible with Arduino but works for half the data readings)\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690165092533,"sku":"PL4-SEN-15103","price":104.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/15103-Particulate_Matter_Sensor_-_SPS30-01.jpg?v=1618122278"},{"product_id":"pl4-sen-15112","title":"CO Humidity and Temperature Sensor - SCD30","description":"\u003cp\u003eThe SCD30 from Sensirion is a high quality Nondispersive Infrared (NDIR) based CO‚‚ sensor capable of detecting 400 to 10000ppm with an accuracy of ±(30ppm+3%). In order to improve accuracy the SCD30 has temperature and humidity sensing built-in, as well as commands to set the current altitude. For additional accuracy the SCD30 also accepts ambient pressure readings!\u003c\/p\u003e\n\n\u003cp\u003eWe've written an Arduino library to make reading the CO‚‚, humidity, and temperature very easy. It can be downloaded through the Arduino Library manager: search for 'SparkFun SCD30' or it can be found in the *Documents* tab above.\u003c\/p\u003e\n\n\u003cp\u003eThe SCD30 Humidity and Temperature Sensor can also be automatically detected, scanned, configured, and logged using the [OpenLog Artemis](https:\/\/www.sparkfun.com\/products\/16832) datalogger system. No programming, soldering, or setup required!\u003c\/p\u003e\n\n\u003cp\u003e**Note:** The SCD30 has an automatic self-calibration routine. Sensirion recommends 7 days of continuous readings with at least 1 hour a day of 'fresh air' for self-calibration to complete.\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* Power supply voltage: 3.3V - 5.5V \u003cbr\u003e\n* NDIR CO2 sensor technology\u003cbr\u003e\n* Integrated temperature and humidity sensor\u003cbr\u003e\n* Best performance-to-price ratio\u003cbr\u003e\n* Dual-channel detection for superior stability\u003cbr\u003e\n* Small form factor: 35 mm x 23 mm x 7 mm\u003cbr\u003e\n* Measurement range: 400 ppm “ 10.000 ppm\u003cbr\u003e\n* Accuracy: ±(30 ppm + 3%)\u003cbr\u003e\n* Current consumption: 19 mA @ 1 meas. per 2 s.\u003cbr\u003e\n* Energy consumption: 120 mJ @ 1 measurement\u003cbr\u003e\n* Fully calibrated and linearized\u003cbr\u003e\n* Digital interface UART or I2C\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [SCD30 Datasheet](https:\/\/cdn.sparkfun.com\/assets\/4\/8\/8\/7\/7\/Sensirion_CO2_Sensors_SCD30_Datasheet.pdf)\u003cbr\u003e\n* [Design-In Guidelines](https:\/\/cdn.sparkfun.com\/assets\/4\/a\/8\/d\/f\/SPS30_Mechanical_Design_and_Assembly_Guidelines_v1.0_D1.pdf)\u003cbr\u003e\n* [Low-Power Example App Note](https:\/\/cdn.sparkfun.com\/assets\/2\/0\/6\/7\/7\/SCD30_Low_Power_Mode.pdf)\u003cbr\u003e\n* [Interface Specification](https:\/\/cdn.sparkfun.com\/assets\/f\/e\/d\/0\/1\/Sensirion_CO2_Sensors_SCD30_Interface_Description.pdf)\u003cbr\u003e\n* [Arduino Library](https:\/\/github.com\/sparkfun\/SparkFun_SCD30_Arduino_Library)\u003cbr\u003e\n* [SCD30 Download Center](https:\/\/www.sensirion.com\/en\/download-center\/carbon-dioxide-sensors-co2\/co2-sensor\/)\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690165420213,"sku":"PL4-SEN-15112","price":143.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/15112-CO____Humidity_and_Temperature_Sensor_-_SCD30-01.jpg?v=1618122280"},{"product_id":"pl4-sen-15176","title":"Zio Current and Voltage Sensor - INA219 (Qwiic)","description":"\u003cp\u003eThe Zio Current and Voltage Sensor is a highly accurate current and power monitor. Utilizing the INA219, it's able to read DC current and power over I2C with up to 1% precision. This is a great fit for a variety of applications, including estimating battery life, tracking solar power generation, or monitoring electricity consumption.\u003c\/p\u003e\n\n\u003cp\u003eThis sensor can measure voltage up to 26VDC and current up to 3.2A. The I2C interface makes it easy to daisy chain multiple devices and receive data via the Qwiic connect system.\u003c\/p\u003e\n\n\u003cp\u003e***\u003c\/p\u003e\n\n\u003cp\u003e*The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you cant hook it up wrong.*\u003c\/p\u003e\n\n\u003cp\u003e***\u003c\/p\u003e\n\n\u003cp\u003e**Includes:**\u003c\/p\u003e\n\n\u003cp\u003e* 1x Current and Voltage Sensor - INA219\u003cbr\u003e\n* 1x Male Header - 6-pin\u003c\/p\u003e\n\n\u003cp\u003e**Features:**\u003c\/p\u003e\n\n\u003cp\u003e* Operating voltage: 3.3V\u003cbr\u003e\n* Bus voltage: 0-26V\u003cbr\u003e\n* Max. current: 3.2A\u003cbr\u003e\n* Interface: I2C (address 1000000 (default))\u003cbr\u003e\n* I2C address: 0x40, 0x41, 0x44, 0x45 (Default: 0x40)\u003cbr\u003e\n* IC: INA219\u003cbr\u003e\n* Dimensions: 25.4mm x 25.4mm\u003cbr\u003e\n* Weight: 3.0g\u003c\/p\u003e\n\n\u003cp\u003e**Documents:**\u003c\/p\u003e\n\n\u003cp\u003e* [Getting Started Guide](https:\/\/www.smart-prototyping.com\/blog\/Zio-Current-and-Voltage-Sensor-Qwiic-Start-Guide)\u003cbr\u003e\n* [Datasheet](https:\/\/cdn.sparkfun.com\/assets\/0\/b\/6\/6\/9\/ina219.pdf) (INA219)\u003cbr\u003e\n* [Library](https:\/\/github.com\/adafruit\/Adafruit_INA219) (INA219)\u003cbr\u003e\n* [GitHub](https:\/\/github.com\/ZIOCC\/Zio-Qwiic-Current-Voltage-Sensor-INA219)\u003c\/p\u003e","brand":"PuriLite","offers":[{"title":"Default Title","offer_id":39690165485749,"sku":"PL4-SEN-15176","price":37.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/15176-Zio_Current_and_Voltage_Sensor_-_INA219__Qwiic_-01.jpg?v=1618122283"},{"product_id":"pl4-sen-15219","title":"Pulse Oximeter and Heart Rate Sensor - MAX30101 \u0026 MAX32664 (Qwiic)","description":"\u003cp\u003eThe SparkFun Pulse Oximeter and Heart Rate Sensor is an I2C based biometric sensor, utilizing two chips from Maxim Integrated: the MAX32664 Biometric Sensor Hub and the MAX30101 Pulse Oximetry and Heart Rate Module. While the latter does all the sensing, the former is an incredibly small and fast Cortex M4 processor that handles all of the algorithmic calculations, digital filtering, pressure\/position compensation, advanced R-wave detection, and automatic gain control. We've provided a Qwiic connector to easily connect to the I2C data lines but you will also need to connect to two additional lines. This board is very small, measuring at 1in x 0.5in (25.4mm x 12.7mm), which means it will fit nicely on your finger without all the bulk.\u003c\/p\u003e\n\n\u003cp\u003eThe MAX30101 does all the sensing by utilizing its internal LEDs to bounce light off the arteries and arterioles in your finger's subcutaneous layer and sensing how much light is absorbed with its photodetectors. This is known as [photoplethysmography](https:\/\/en.wikipedia.org\/wiki\/Photoplethysmogram). This data is passed onto and analyzed by the MAX32664 which applies its algorithms to determine heart rate and blood oxygen saturation (SpO2). SpO2 results are reported as the percentage of hemoglobin that is saturated with oxygen. It also provides useful information such as the sensor's confidence in its reporting as well as a handy finger detection data point. To get the most out of the sensor we've written an Arduino Library to make it easy to adjust all the possible configurations.\u003c\/p\u003e\n\n\u003cp\u003e***\u003c\/p\u003e\n\n\u003cp\u003e*The SparkFun Qwiic connect system is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you cant hook it up wrong.*\u003c\/p\u003e\n\n\u003cp\u003e***\u003c\/p\u003e\n\n\u003cp\u003e-\u0026gt;\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":39690165846197,"sku":"PL4-SEN-15219","price":86.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/15219-SparkFun_Pulse_Oximeter_and_Heart_Rate_Sensor_-_MAX30101__Qwiic_-01.jpg?v=1618122286"},{"product_id":"pl4-sen-15440","title":"Atmospheric Sensor Breakout - BME280 (Qwiic)","description":"\u003cp\u003eThe SparkFun BME280 Atmospheric Sensor Breakout is an easy way to measure barometric pressure, humidity, and temperature readings, all without taking up too much space. Basically, you can find out anything you need to know about atmospheric conditions from this tiny breakout. The BME280 Breakout has been designed to be used in indoor\/outdoor navigation, weather forecasting, home automation, and even personal health and wellness monitoring. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1\"-spaced pins in case you prefer to use a breadboard.\u003c\/p\u003e\n\n\u003cp\u003eThe on-board BME280 sensor measures atmospheric pressure from 30kPa to 110kPa as well as relative humidity and temperature. The breakout provides a 3.3V SPI interface, a 5V tolerant I2C interface (with pull-up resistors to 3.3V), can be configured to take measurements with less than 1mA of current draw.\u003c\/p\u003e\n\n\u003cp\u003e***\u003c\/p\u003e\n\n\u003cp\u003e*The [SparkFun Qwiic Connect System](https:\/\/www.sparkfun.com\/qwiic) is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you cant hook it up wrong.*\u003c\/p\u003e\n\n\u003cp\u003e*The BME280 Atmospheric Sensor Breakout can also be automatically detected, scanned, configured, and logged using the [OpenLog Artemis](https:\/\/www.sparkfun.com\/products\/16832) datalogger system. No programming, soldering, or setup required!*\u003c\/p\u003e\n\n\u003cp\u003e***\u003c\/p\u003e\n\n\u003cp\u003eNeed a custom board? This component can be found in SparkFun's à La Carte board builder. You can have a custom design fabricated with this component - and your choice of hundreds of other sensors, actuators and wireless devices - delivered to you in just a few weeks.\u003c\/p\u003e\n\n\n\n    \n\n\n\n\n\n\u003cp\u003e***\u003c\/p\u003e\n\n\u003cp\u003e-\u0026gt;\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":39690167025845,"sku":"PL4-SEN-15440","price":47.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/15440-SparkFun_Atmospheric_Sensor_Breakout_-_BME280__Qwiic_-04a.jpg?v=1618122298"},{"product_id":"pl4-sen-15805","title":"High Precision Temperature Sensor - TMP117 (Qwiic)","description":"The SparkFun Qwiic TMP117 breakout is a high precision temperature sensor equipped with an I2C interface. It outputs temperature readings with high precision of ±0.1°C across the temperature range of -20°C to +50°Cs with no calibration and a maximum range from -55°C to 150°C. The SparkFun High Precision Temperature Sensor also has a very low power consumption rate which minimizes the impact of self-heating on measurement accuracy. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1\"-spaced pins in case you prefer to use a breadboard. \r\n\r\nThe SparkFun High Precision Temperature Sensor also includes programmable temperature limits, and digital offset for system correction. While the TMP102 is capable of reading temperatures to a resolution of 0.0625°C and is accurate up to 0.5°C, the on-board TMP117 is not only more precise but has a 16-bit resolution of 0.0078°C!\r\n\r\nTo make this breakout even easier to use, we've written an [Arduino library](https:\/\/github.com\/sparkfun\/SparkFun_TMP117_Arduino_Library) to help you get started \"Qwiic-ly.\" Check the *Documents* tab above for more information.\r\n\r\n***\r\n\r\n*The [SparkFun Qwiic Connect System](https:\/\/www.sparkfun.com\/qwiic) is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you cant hook it up wrong.*\r\n\r\n*The TMP117 High Precision Temperature Sensor can also be automatically detected, scanned, configured, and logged using the [OpenLog Artemis](https:\/\/www.sparkfun.com\/products\/16832) datalogger system. No programming, soldering, or setup required!*\r\n\r\n***\r\n\r\nNeed a custom board? This component can be found in SparkFun's à La Carte board builder. You can have a custom design fabricated with this component - and your choice of hundreds of other sensors, actuators and wireless devices - delivered to you in just a few weeks.\r\n\r\n\r\n\r\n    \r\n\r\n\r\n\r\n\r\n***\r\n\r\n-\u0026gt;  ","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":39690167845045,"sku":"PL4-SEN-15805","price":46.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/15805-SparkFun_High_Precision_Temperature_Sensor_-_TMP117__Qwiic_-01.jpg?v=1618122303"}],"url":"https:\/\/getcahits.com\/collections\/sensors.oembed","provider":"PuriLite","version":"1.0","type":"link"}