{"title":"Safety boots","description":"","products":[{"product_id":"pl3-eplc2-lb-45led-rt-cm","title":"45W Hazardous Location Low Bay LED Fixture - Paint Spray Booth Approved -6,300 lms - Ceiling Mount - T5","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eEPLC2-LB-45LED-RT-CM - Hazardous Location Low Bay LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eListing: United States - Canada\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass I, Division 2, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Technology: LED\u003c\/td\u003e\n\u003ctd\u003eClass II, Divisions 1 \u0026amp; 2, Groups E, F and G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 7.04\" L x 15.04\" H x 5.72\"D\u003c\/td\u003e\n\u003ctd\u003eClass III, Divisions 1 \u0026amp; 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 9 lbs\u003c\/td\u003e\n\u003ctd\u003eNRTL Certified to UL 844 Ed. 13\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eVoltage: 100-277 Volts AC, 50\/60Hz or 11-25 Volts AC\/DC\u003c\/td\u003e\n\u003ctd\u003eNRTL Certified to UL 1598\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 45W\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 137 Rev 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 5,600 lms\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 250.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 140 Lm\/w\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 30-M-1986 Rev 2012\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 60,000+ Hours\u003c\/td\u003e\n\u003ctd\u003eT5 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 5600K, 4500K or 3000K\u003c\/td\u003e\n\u003ctd\u003ePaint Spray Booth Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: \u0026gt;75 CRI\u003c\/td\u003e\n\u003ctd\u003eIEC 60529 Tested\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Type: -\u003c\/td\u003e\n\u003ctd\u003eIP67 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base: -\u003c\/td\u003e\n\u003ctd\u003eLEL Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReplacement Lamp: -\u003c\/td\u003e\n\u003ctd\u003eSingle LED Driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle: 60° or 125°\u003c\/td\u003e\n\u003ctd\u003e80% Lumen Retention after 60,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003eFactory Sealed Light Fixture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Efficiency: \u0026gt;95%\u003c\/td\u003e\n\u003ctd\u003eRecommended 15` to 40` Mounting Height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor: 0.99\u003c\/td\u003e\n\u003ctd\u003e Surge Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmps: 0.42A @ 120V, 0.21A @ 240V, 0.18A @ 277V\u003c\/td\u003e\n\u003ctd\u003eReplacement for 250W Metal Halide Lamps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range: -50° C to +65°C\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp Rating: T5\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature Rise: 11°C (10°F) Over Ambient\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Copper Free Cast Aluminum\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Finish: Epoxy Powder Coated - Grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: Hardened Borosilicate Glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGasket Material: Silicone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Ceiling\/Surface Mount \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: Internal Wiring Junction Box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHub: (4) 3\/4\" NPT Threaded Hubs\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"632\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px; width: 626px;\"\u003e\n\u003ctable width=\"632\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px; width: 626px;\"\u003e\n\u003ctable width=\"632\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px; width: 626px;\"\u003e\nThe Larson Electronics EPLC2-LB-45LED-RT-CM Hazardous Location Low Bay LED Light Fixture provides operators with a powerful alternative to traditional hazardous location luminaries. Capable of replacing 250-watt metal halide lamps, this 45-watt low bay LED unit emits 6,300 lumens, carries an IP67 waterproof rating and features an extended lifespan of 60,000+ hours. The factory sealed, hazardous location fixture is protected by a copper-free aluminum housing with an epoxy powder coated finish.\nThe EPLC2-LB-45LED-RT-CM is a Class I, Division 2 and Class II, Divisions 1 \u0026amp; 2 hazardous location light fixture that is designed for energy efficient and superior illumination in combustible environments. This 45-watt low bay fixture offers 5,600 lumens of high quality light with a color temperature of 5600K. We also offer a 3000K warm white and 4500K natural white color temperature options (longer lead times may apply for non-standard temperatures). Serving as a suitable replacement for 250-watt metal halide lamps, a color rendering index of 75 ensures colors and details are produced more accurately than high pressure sodium or mercury vapor luminaries.\nThis low bay lighting solution is IP67 rated, dust-proof and protected against high pressure jets and temporary submersion. The copper-free aluminum alloy housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronic components. An epoxy powder coated finish facilitates durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000-hour rated lifespan with 80% lumen retention. The hazardous location low bay LED light also offers operators convenience in the form of field serviceability.\n\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\nLED Drivers: Even in LED fixtures, heat is the single largest factor in premature light failure and color shifting. As a result, many manufacturers reduce the output of their LEDs in order to reduce the amount of heat produced. Rather than lower light output or quality, Larson Electronics addresses this problem with the addition of an electronic LED driver. This internal driver provides the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. This not only reduces the energy dissipation, effectively lowering the operating temperature of the fixture, but also prevents AC over-voltage and short circuit loading making this fixture virtually maintenance free. Because the electronic driver allows the EPLC2-LB-45LED-RT-CM to run at a cooler internal temperature and regulates the electrical current, energy efficiency and LED service hours are maximized while at the same time reducing operating costs and downtime incurred from the frequent servicing intervals required with other hotter running lights.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr align=\"center\"\u003e\n\u003ctd\u003eEnergy Consumption Comparison\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eMetal Halide\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eWattage\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e175 watts\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e50 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 120V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.69 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.42 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 220V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.92 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.23 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 240V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.85 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.21 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 277V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.73 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.18 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 12V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e16.77 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e4.17 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 24V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e8.39 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e2.08 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eLamp Life Expectancy\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e20,000 hours\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e60,000+ hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eOperation cost per year\n(12hs\/day @ 12c\/kWh)\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$241.78\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$26.30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"3\" style=\"width: 161px;\"\u003eEach LED light fixture has the potential to save $150.00+ per year in electricity alone, not including maintenance costs, operational downtime, reduced productivity, HVAC loads, or carbon footprint. When retrofitting an entire facility with 100s of light fixtures, the return on investment of LED over metal halide becomes evident.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nVoltage: This light is universal voltage capable and can be operated with 100-277V AC, 50\/60Hz. We also offer a low voltage version of this LED fixture that operates on AC\/DC voltages from 11-25 Volts.\nWiring: The hazardous location low bay LED light fixture is equipped with an internal wiring junction box built into the mount of the fixture. A total of four, 3\/4\" NPT threaded ports are available for running conduit (located at every corner of the unit). Additionally, wiring can be passed through the junction box, reducing the need for additional junction boxes. Operators run wiring directly to the fixture and terminate in the junction box mount. This fixture is factory sealed and does not require a seal off.\nMount: This hazardous location low bay LED light fixture comes standard with a flat surface ceiling mounting system, equipped with four bolts. The sturdy, square mounting plate can be secured on horizontal or vertical surfaces. Spacing between the mounting component and LED fixture's fins, which are located at the back of the unit, streamline cool operation. Several mounting options including pendant mounting and cable mounting can be ordered separately. Compared to high bay lights, low bay fixtures are recommended for lower mounting heights ranging between 15' to 40'.\nSuggested Applications: Paint spray booths, aircraft maintenance, oil drilling rigs, refineries, solvent and cleaning areas, chemical manufacturing, waste treatment plants, gas processing plants and more.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264253415605,"sku":"PL3-EPLC2-LB-45LED-RT-CM","price":936.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPLC2-LB-45LED-RT-CM.jpg?v=1628397606"},{"product_id":"pl3-epl-hb-100led-rt-480v","title":"480V Class I Division 1 Explosion Proof 100 Watt High Bay LED Light Fixture - Paint Spray Booth","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eEPL-HB-100LED-RT-480V - C1D1 High Bay LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eListing: United States - Canada\u003c\/td\u003e\n\u003ctd\u003eListed for United States and Canada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: Cree LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass I, Divisions 1 \u0026amp; 2, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 14\"H x 16\"W 5\"D\u003c\/td\u003e\n\u003ctd\u003eClass II, Divisions 1 \u0026amp; 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 32 lbs\u003c\/td\u003e\n\u003ctd\u003eClass III, Divisions 1 \u0026amp; 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 347-480V AC\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 844 Ed. 13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 100W\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 1598\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 14,000\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 137 Rev 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficiency: 140 Lm\/W\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 250.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 60,000+ Hours\u003c\/td\u003e\n\u003ctd\u003eT5 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 5000K, 4000K, 3000K\u003c\/td\u003e\n\u003ctd\u003ePaint Spray Booth Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: \u0026gt;75 CRI\u003c\/td\u003e\n\u003ctd\u003eIEC 60529 Tested\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle: 60° or 125°\u003c\/td\u003e\n\u003ctd\u003eIP67 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003eLEL Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Efficiency: \u0026gt;95%\u003c\/td\u003e\n\u003ctd\u003eMultiple Driver Banks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor: 0.992\u003c\/td\u003e\n\u003ctd\u003e80% Lumen Retention after 60,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmperage: 0.83A @ 120V, 0.42 @ 240V, 0.36 @ 277V\u003c\/td\u003e\n\u003ctd\u003eFactory Sealed Light Fixture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range:-50° C to +65°C\u003c\/td\u003e\n\u003ctd\u003eRecommended 15` to 40` Mounting Height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp Rating: T5\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Copper Free Cast Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: Hardened Borosilicate Glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGasket Material: Silicone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: 3\/4€ Pendant \u0026amp; Swivel Mount - Both Ship w\/ Fixture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: 10` 16\/3 SOOW w\/ Flying Leads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring Hub: 3\/4\" NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe Larson Electronics EPL-HB-100LED-RT-480V Explosion Proof High Bay light fixture provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older incandescent, metal halide and high pressure sodium lights.  \nThis Class I Division 1 \u0026amp; 2, Class II Division 1 \u0026amp; 2 explosion proof light fixture provides 14,000 lumens of high quality light while drawing only 100 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nThe explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains eight individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.\nUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.\nThis light is universal voltage capable and can be operated with 347-480 VAC without modifications. 347V is common in Western Canada, while 480V is common in the United States and Eastern Canada. This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics. \n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr align=\"center\"\u003e\n\u003ctd\u003e\nEnergy Consumption Comparison\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eMetal Halide\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eWattage\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e250 watts\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e100 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 347V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.83 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.29 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 480V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.60 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.21 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eLamp Life Expectancy\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e20,000 hours\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e50,000+ hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eOperation cost per year\n(12hs\/day @ 12c\/kWh)\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$149.80\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$52.56\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\" colspan=\"3\"\u003eEach LED light fixture has the potential to save ~$100.00+ per year in electricty alone, not including maintainence costs, operational downtime, reduced productivity, HVAC loads, or carbon footprint. When retrofitting an entire facility with 100s of light fixtures, the return on investment of LED over metal halide becomes evident. \n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nThis LED light produces 14,000 lumens with a color temperature of 5000K and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. We also offer a 3000K warm white and 4000K natural white color temperature options (longer lead times may apply for non-standard temperatures). The EPL-HB-100LED-RT-480V offers several mounting options including ceiling mounting, pendant mounting, wall mounting and cable mounting. The standard version of this explosion proof LED fixture includes a pendant mount and a surface mount option. \n\n\u003ctable width=\"100%\" border=\"0\" cellpadding=\"2\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eHigh Quality Features\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 212px;\"\u003e\n1. Low power consumption.\n2. Instant on\/off operation.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. Superior color rendering compared to HPS, LPS, MH.\n5. Retains 80% lumen output after 60,000 operating hours.\n6. Powder coated aluminum fixture body. \n7. Pendant and Swivel Bracket mount included\n8. Low profile - Light weight\n9. 14,000 Lumen output from 100 watts\n\n\n\n\n\n\n\n\n\u003c\/td\u003e\n\u003ctd\u003e\n1. 60,000 hour lifespan.\n 2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off €“ No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264253677749,"sku":"PL3-EPL-HB-100LED-RT-480V","price":3172.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-HB-100LED-RT-480V.jpg?v=1628397655"},{"product_id":"pl3-hald-24-1x50led-v3","title":"50 Watt Explosion Proof LED Light - 27\" x 29.5\" Lay-In Troffer - Class 1 Div 1 \u0026 2 - Paint Booths","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eHALD-24-1X50LED-V3 HAZLOC Lay-In Panel Mount Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eListing: United States - Canada\u003c\/td\u003e\n\u003ctd\u003eListed for United States and Canada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: Cree LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass I, Divisions 1 \u0026amp; 2, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 23 3\/4\"-L x 23 3\/4\"-W x 8\"-D\u003c\/td\u003e\n\u003ctd\u003eClass II, Divisions 1 \u0026amp; 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlange Dimensions: 27\"-L x 29.5\"-W\u003c\/td\u003e\n\u003ctd\u003eClass II, Divisions 1 \u0026amp; 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 40lbs\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 844 Ed. 13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 100-277 Volts AC, 50\/60Hz or 11-25 Volts AC\/DC\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 1598\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 50W\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 137 Rev 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 7,000\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 250.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 140 Lm\/W\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 30-M-1986 Rev 2012\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 60,000+ Hours\u003c\/td\u003e\n\u003ctd\u003eT5 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 5000K, 4000K, 3000K\u003c\/td\u003e\n\u003ctd\u003ePaint Spray Booth Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: \u0026gt;75 CRI\u003c\/td\u003e\n\u003ctd\u003eIEC 60529 Tested\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle: 60° or 125°\u003c\/td\u003e\n\u003ctd\u003eIP67 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003eLEL Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Efficiency: \u0026gt;95%\u003c\/td\u003e\n\u003ctd\u003eMultiple Driver Banks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor: 0.992\u003c\/td\u003e\n\u003ctd\u003e80% Lumen Retention after 60,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range:-50°C to +65°C\u003c\/td\u003e\n\u003ctd\u003eFactory Sealed Light Fixture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp Rating: T5\u003c\/td\u003e\n\u003ctd\u003eRecessed Panel Mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Copper Free Cast Aluminum\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Finish: Powder Coated - White\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: 1\/8\" Polycarbonate\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Recessed Panel Mounting\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: 10` 16\/3 SOOW w\/ Flying Leads\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring Hub: 3\/4\" NPT\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Driver Specs\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage: 100-277 Volts AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Current: 1.8A Max\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor: \u0026gt;98%\u003c\/td\u003e\n\u003ctd\u003eToll Free: 1-800-369-6671\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficiency: \u0026gt;88%\u003c\/td\u003e\n\u003ctd\u003eIntl: 1-214-616-6180\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Voltage: 54V Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Current: 2.1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\nMade in the USA \nThe Larson Electronics HALD-24-1X50LED-V3 Hazardous Area LED Light Fixture is designed to provide operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. This LED panel mount fixture is ETL listed Class I Divisions 1 \u0026amp; 2, Class II Divisions 1 \u0026amp; 2, and is approved for use within paint spray booths. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for paint booths and hazardous locations where flammable chemical\/petrochemical vapors are present.\n***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*** \nThe HALD-24-1X50LED-V3 Explosion Proof fixture is a 2x2 Class I Division 1 \u0026amp; 2 hazardous location lay-in LED light fixture is ideal for use in paint spray booths and hazardous environments where space for lighting fixtures is limited. This fixture is T5 temperature rated and is a fully integrated LED unit. The LED assembly is protected by an aluminum framed, hinged, 3\/16\" thick polycarbonate door that provides direct front access to the internal components. The lamp housing is designed for recessed mounting, and is constructed of non-sparking aluminum coated with a powder coated white finish.\nThis Class I Divisions 1 \u0026amp; 2, Class II Division 1 \u0026amp; 2 explosion proof light fixture provides 7,000 lumens of high quality light while drawing only 50 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. A special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eBeam Angle of 125° or 60° are Available \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e125° Beam Angle \u003c\/td\u003e\n\u003ctd\u003e60° Beam Angle \u003c\/td\u003e\n \u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nThe integrated LED assembly in this unit features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. TThis new series of LED lamps contains eight individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.\nUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.\nThis light is multi-voltage capable and can be operated with 100-277 VAC, 50\/60Hz without any need for a special ballast. The aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LED luminaries. The LED lamp produces 7,000 lumens with a color temperature of 5000K, 4000K, or 3000K and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nThis fixture is designed for recessed mounting and requires a mounting hole to be made in booth panels capable of accommodating the fixture housing in order to provide the maximum amount of space in paint spray booth enclosures. Once mounted, this fixture`s door frame will extend 3\/8\" into the spray booth.\nApplications: Paint spray booths and enclosed spaces where flammable chemical\/petrochemical vapors are present.\n\n\u003ctable cellpadding=\"2\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eHigh Quality Features\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1. Low power consumption.\n2. Fixture arrives assembled and lamped to reduce installation time and cost.\n3. Instant on\/off operation.\n4. Fixture constructed of welded corrosion resistant copper free aluminum alloy.\n5. 3\/4\" Wiring Hubs\n6. Superior color rendering compared to HPS, LPS, MH.\n7. Retains 80% lumen output after 60,000 operating hours.\n8. Powder coated aluminum fixture body. \n9. Low profile - Light weight\n10. 7,000 Lumen output from only 50 watts\u003c\/td\u003e\n\u003ctd\u003e1. 60,000 hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off - No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264253808821,"sku":"PL3-HALD-24-1X50LED-V3","price":3694.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-HALD-24-1X50LED-V3.jpg?v=1629080062"},{"product_id":"pl3-hald-24-1x50led","title":"50 Watt Explosion Proof LED Light - 2x2 Lay-In Troffer - Class 1 Div 1 \u0026 2 - Paint Spray Booth Rated","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eHALD-24-1X50LED HAZLOC Lay-In Panel Mount Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eListing: United States - Canada\u003c\/td\u003e\n\u003ctd\u003eListed for United States and Canada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: Cree LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass I, Divisions 1 \u0026amp; 2, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 23 3\/4\"-L x 23 3\/4\"-W x 8\"-D\u003c\/td\u003e\n\u003ctd\u003eClass II, Divisions 1 \u0026amp; 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlange Dimensions: 25 5\/8”-L x 27 1\/2\"-W\u003c\/td\u003e\n\u003ctd\u003eClass II, Divisions 1 \u0026amp; 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 40lbs\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 844 Ed. 13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 100-277 Volts AC, 50\/60Hz or 11-25 Volts AC\/DC\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 1598\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 50W\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 137 Rev 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 7,000\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 250.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 140 Lm\/W\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 30-M-1986 Rev 2012\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 60,000+ Hours\u003c\/td\u003e\n\u003ctd\u003eT5 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 5600K, 4500K, 3000K\u003c\/td\u003e\n\u003ctd\u003ePaint Spray Booth Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: \u0026gt;75 CRI\u003c\/td\u003e\n\u003ctd\u003eIEC 60529 Tested\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle: 60° or 125°\u003c\/td\u003e\n\u003ctd\u003eIP67 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003eLEL Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Efficiency: \u0026gt;95%\u003c\/td\u003e\n\u003ctd\u003eMultiple Driver Banks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor: 0.992\u003c\/td\u003e\n\u003ctd\u003e80% Lumen Retention after 60,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range:-50°C to +65°C\u003c\/td\u003e\n\u003ctd\u003eFactory Sealed Light Fixture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp Rating: T5\u003c\/td\u003e\n\u003ctd\u003eRecessed Panel Mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Copper Free Cast Aluminum\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Finish: Powder Coated - White\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: 1\/8\" Polycarbonate\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Recessed Panel Mounting\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: 10` 16\/3 SOOW w\/ Flying Leads\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring Hub: 3\/4\" NPT\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Driver Specs\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage: 100-277 Volts AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Current: 1.8A Max\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor: \u0026gt;98%\u003c\/td\u003e\n\u003ctd\u003eToll Free: 1-800-369-6671\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficiency: \u0026gt;88%\u003c\/td\u003e\n\u003ctd\u003eIntl: 1-214-616-6180\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Voltage: 54V Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Current: 2.1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\nMade in the USA \nThe Larson Electronics HALD-24-1X50LED Hazardous Area LED Light Fixture is designed to provide operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. This LED panel mount fixture is ETL listed Class I Divisions 1 \u0026amp; 2, Class II Divisions 1 \u0026amp; 2, and is approved for use within paint spray booths. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for paint booths and hazardous locations where flammable chemical\/petrochemical vapors are present.\n***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*** \nThe HALD-24-1X50LED Explosion Proof fixture is a 2x2 Class I Division 1 \u0026amp; 2 hazardous location lay-in LED light fixture is ideal for use in paint spray booths and hazardous environments where space for lighting fixtures is limited. This fixture is T5 temperature rated and is a fully integrated LED unit. The LED assembly is protected by an aluminum framed, hinged, 3\/16\" thick polycarbonate door that provides direct front access to the internal components. The lamp housing is designed for recessed mounting, and is constructed of non-sparking aluminum coated with a powder coated white finish.\nThis Class I Divisions 1 \u0026amp; 2, Class II Division 1 \u0026amp; 2 explosion proof light fixture provides 7,000 lumens of high quality light while drawing only 50 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. A special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eBeam Angle of 125° or 60° are Available \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e125° Beam Angle \u003c\/td\u003e\n\u003ctd\u003e60° Beam Angle \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nThe integrated LED assembly in this unit features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. TThis new series of LED lamps contains eight individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.\nUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.\nThis light is multi-voltage capable and can be operated with 100-277 VAC, 50\/60Hz without any need for a special ballast. The aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LED luminaries. The LED lamp produces 7,000 lumens with a color temperature of 5600K, 4500K, or 3000K and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nThis fixture is designed for recessed mounting and requires a mounting hole to be made in booth panels capable of accommodating the fixture housing in order to provide the maximum amount of space in paint spray booth enclosures. Once mounted, this fixture`s door frame will extend 3\/8” into the spray booth.\nApplications: Paint spray booths and enclosed spaces where flammable chemical\/petrochemical vapors are present.\n\n\u003ctable cellpadding=\"2\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eHigh Quality Features\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1. Low power consumption.\n2. Fixture arrives assembled and lamped to reduce installation time and cost.\n3. Instant on\/off operation.\n4. Fixture constructed of welded corrosion resistant copper free aluminum alloy.\n5. 3\/4\" Wiring Hubs\n 6. Superior color rendering compared to HPS, LPS, MH.\n7. Retains 80% lumen output after 60,000 operating hours.\n8. Powder coated aluminum fixture body. \n9. Low profile - Light weight\n10. 7,000 Lumen output from only 50 watts\u003c\/td\u003e\n\u003ctd\u003e1. 60,000 hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off - No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264253841589,"sku":"PL3-HALD-24-1X50LED","price":4084.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-HALD-24-1X50LED.jpg?v=1629080041"},{"product_id":"pl3-epl-hb-100led-rt-140db","title":"C1D1 Explosion Proof 100 Watt Low Bay LED Light Fixture - 140° Spread - Paint Spray Booth Approved","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eEPL-HB-100LED-RT-140DB - C1D1 Low Bay LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eListing: United States - Canada\u003c\/td\u003e\n\u003ctd\u003eListed for United States and Canada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass I, Divisions 1 \u0026amp; 2, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 14\"H x 16\"W 5\"D\u003c\/td\u003e\n\u003ctd\u003eClass II, Divisions 1 \u0026amp; 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 32 lbs\u003c\/td\u003e\n\u003ctd\u003eClass III, Divisions 1 \u0026amp; 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 100-277 Volts AC, 50\/60Hz or 11-25 Volts AC\/DC\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 844 Ed. 13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 100W\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 1598\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 14,000\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 137 Rev 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficiency: 140 Lm\/W\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 250.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 60,000+ Hours\u003c\/td\u003e\n\u003ctd\u003eT5 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 5000K, 4000K, 3000K\u003c\/td\u003e\n\u003ctd\u003ePaint Spray Booth Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: \u0026gt;75 CRI\u003c\/td\u003e\n\u003ctd\u003eIEC 60529 Tested\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle: 140°\u003c\/td\u003e\n\u003ctd\u003eIP67 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003eLEL Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Efficiency: \u0026gt;95%\u003c\/td\u003e\n\u003ctd\u003eMultiple Driver Banks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor: 0.992\u003c\/td\u003e\n\u003ctd\u003e80% Lumen Retention after 60,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmperage: 0.83A @ 120V, 0.42 @ 240V, 0.36 @ 277V\u003c\/td\u003e\n\u003ctd\u003eFactory Sealed Light Fixture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range:-50° C to +65°C\u003c\/td\u003e\n\u003ctd\u003eRecommended 15` to 40` Mounting Height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp Rating: T5\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Copper Free Cast Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: Hardened Borosilicate Glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGasket Material: Silicone\u003c\/td\u003e\n\u003c\/tr\u003e \n\u003ctr\u003e\n\u003ctd\u003eMounting: 3\/4€ Pendant \u0026amp; Swivel Mount - Both Ship w\/ Fixture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: 10` 16\/3 SOOW w\/ Flying Leads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring Hub: 3\/4\" NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe Larson Electronics EPL-HB-100LED-RT-140DB Explosion Proof Low Bay light fixture provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older incandescent, metal halide and high pressure sodium lights.  \nThis Class I Division 1 \u0026amp; 2, Class II Division 1 \u0026amp; 2 explosion proof low bay light fixture provides 14,000 lumens of high quality light while drawing only 100 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n \u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nThe explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains eight individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.\nUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd colspan=\"3\"\u003eClick Photos to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e60° Beam Angle \u003c\/td\u003e\n\u003ctd\u003e125° Beam Angle Plug \u003c\/td\u003e\n\u003ctd\u003e140° Beam Angle Plug \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nBeam Angles: When used as a fixed mount fixture, the varying beam angles need to be mounted at certain heights in order to achieve the greatest coverage and efficiency in both high bay and low bay lighting situations. The 60° beam should be mounted in high bay fixtures over 25` in height and 25` away from objects if used as a wall mounted light. The 125° beam is ideal for low bay fixtures in a height range of 15-25 feet and the same distance away from objects when the wall mounting option is employed. The 140° beam is best used as a low bay fixture in areas with a ceiling height of 15` or less or for illuminating objects up to 15` away when wall mounted.\nThis light is universal voltage capable and can be operated with 100-277 VAC, 50\/60Hz. We also offer a low voltage version of this LED fixture that operates on AC\/DC voltages from 11-25 Volts. This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics. \n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr align=\"center\"\u003e\n\u003ctd\u003e\nEnergy Consumption Comparison\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eMetal Halide\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eWattage\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e250 watts\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e100 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 120V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e2.38 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e.83 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 220V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.30 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.45 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 240V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.19 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.42 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 277V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.03 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.36 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 12V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e23.75 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e8.3 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 24V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e11.88 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e4.17 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eLamp Life Expectancy\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e20,000 hours\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e50,000+ hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eOperation cost per year\n(12hs\/day @ 12c\/kWh)\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$149.80\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$52.56\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\" colspan=\"3\"\u003eEach LED light fixture has the potential to save ~$100.00+ per year in electricty alone, not including maintainence costs, operational downtime, reduced productivity, HVAC loads, or carbon footprint. When retrofitting an entire facility with 100s of light fixtures, the return on investment of LED over metal halide becomes evident. \n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nThis LED light produces 14,000 lumens with a color temperature of 5600K and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. We also offer a 3000K warm white and 4500K natural white color temperature options (longer lead times may apply for non-standard temperatures). The EPL-HB-100LED-RT-140DB offers several mounting options including ceiling mounting, pendant mounting, wall mounting and cable mounting. The standard version of this explosion proof LED fixture includes a pendant mount and a surface mount option. \n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eHigh Quality Features\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 212px;\"\u003e\n1. Low power consumption.\n2. Instant on\/off operation.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. Superior color rendering compared to HPS, LPS, MH.\n5. Retains 80% lumen output after 60,000 operating hours.\n6. Powder coated aluminum fixture body. \n7. Pendant and Swivel Bracket mount included\n8. Low profile - Light weight\n9. 14,000 Lumen output from 100 watts\n\n\n\n\n\n\n\n\n\u003c\/td\u003e\n\u003ctd\u003e\n1. 60,000 hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off €“ No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264254398645,"sku":"PL3-EPL-HB-100LED-RT-140DB","price":2992.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-HB-100LED-RT-140DB.jpg?v=1628397789"},{"product_id":"pl3-epl-hb-150led-rt-150-epp","title":"C1D1 Explosion Proof 150 Watt High Bay LED Light Fixture - Paint Booth Approved - 150' w\/ EXP Plug","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eEPL-HB-150LED-RT-150-EPP - C1D1 High Bay LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eListing: United States - Canada\u003c\/td\u003e\n\u003ctd\u003eListed for United States and Canada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: Cree LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass I, Divisions 1 \u0026amp; 2, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 14\"H x 16\"W 5\"D\u003c\/td\u003e\n\u003ctd\u003eClass II, Divisions 1 \u0026amp; 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 32 lbs\u003c\/td\u003e\n\u003ctd\u003eClass III, Divisions 1 \u0026amp; 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 100-277 Volts AC, 50\/60Hz or 11-25 Volts AC\/DC\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 844 Ed. 13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 150W\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 1598\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 21,000\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 137 Rev 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficiency: 140 Lm\/W\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 250.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 60,000+ Hours\u003c\/td\u003e\n\u003ctd\u003eT5 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 5600K, 5000K, 4500K, 4000K, 3500K, 3000K, 2700K, or 6500K\u003c\/td\u003e\n\u003ctd\u003ePaint Spray Booth Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: \u0026gt;75 CRI\u003c\/td\u003e\n\u003ctd\u003eIEC 60529 Tested\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle: 60°, 125°, or 140°\u003c\/td\u003e\n\u003ctd\u003eIP67 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003eLEL Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNEMA Type (Lighting): 6H x 6V (60° Optics); 6H x 6V (125° Optics); 6H x 7V (140° Optics)\u003c\/td\u003e\n\u003ctd\u003eMultiple Driver Banks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIES Classification: Type I (60° Optics); Type VS (125° Optics); Type VS (140° Optics)\u003c\/td\u003e\n\u003ctd\u003e80% Lumen Retention after 60,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal Classification: Very Short (60° Optics); Very Short (125° Optics); Short (140° Optics)\u003c\/td\u003e\n\u003ctd\u003eFactory Sealed Light Fixture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutoff Classification: Cutoff\u003c\/td\u003e\n\u003ctd\u003eRecommended 15` to 40` Mounting Height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCIE Type: Direct\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBUG Rating: B5-U1-G1 (60° Optics); B4-U1-G1 (125° Optics); B4-U1-G2 (140° Optics)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Efficiency: \u0026gt;95%\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor: 0.992\u003c\/td\u003e\n\u003ctd\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range:-50° C to +65°C\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp Rating: T5\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Copper Free Cast Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: Hardened Borosilicate Glass\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGasket Material: Silicone\u003c\/td\u003e\n\u003ctd\u003eToll Free: 1-800-369-6671\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: 3\/4€ Pendant \u0026amp; Swivel Mount - Both Ship w\/ Fixture\u003c\/td\u003e\n\u003ctd\u003eIntl: 1-214-616-6180\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: 150` 16\/3 SOOW Cord Explosion Proof Plug\u003c\/td\u003e\n\u003ctd\u003eFax: 1-903-498-3364\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCord Cap: 5-15, 5-20, or 6-20\u003c\/td\u003e\n\u003ctd\u003eE-mail: \n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe EPL-HB-150LED-RT-150-EPP from Larson Electronics is an Explosion Proof High Bay LED light fixture that provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. Cree LED technology and a compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older incandescent, metal halide and high pressure sodium lights. \nThis Class I Divisions 1 \u0026amp; 2, Class II Divisions 1 \u0026amp; 2 explosion proof LED light fixture provides 21,000 lumens of high quality light while drawing only 150 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nThe explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twelve individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\n\n\u003ctable width=\"578\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd colspan=\"3\"\u003eClick Photos to Enlarge \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e60° Beam Angle \u003c\/td\u003e\n\u003ctd\u003e125° Beam Angle \u003c\/td\u003e\n\u003ctd\u003e140° Beam Angle \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nBeam Angles: When used as a fixed mount fixture, the varying beam angles need to be mounted at certain heights in order to achieve the greatest coverage and efficiency in both high bay and low bay lighting situations. The 60° beam should be mounted in high bay fixtures over 25` in height and 25` away from objects if used as a wall mounted light. The 125° beam is ideal for low bay fixtures in a height range of 15-25 feet and the same distance away from objects when the wall mounting option is employed. The 140° beam is best used as a low bay fixture in areas with a ceiling height of 15` or less or for illuminating objects up to 15` away when wall mounted.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd colspan=\"3\"\u003eClick Photos to Enlarge \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5-15 Straight Blade Plug \u003c\/td\u003e\n\u003ctd\u003e5-20 Straight Blade Plug \u003c\/td\u003e\n\u003ctd\u003e6-20 Straight Blade Plug \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nWiring \u0026amp; Plug: This explosion proof fixture is equipped with 150 foot of 16\/3 chemical and abrasion resistant SOOW cord that is fitted with an explosion proof cord cap for easy connection to explosion proof outlets. Plug options include a 5-15 15 amp straight blade plug for use with 120V explosion proof outlets, a 5-20 20 amp straight blade plug for use with 120V explosion proof outlets, or a 6-20 20 amp straight blade plug for use with 220-240V explosion proof outlets. **PLEASE NOTE** voltage ratings on plugs and outlets are MAXIMUM voltage. For low voltage applications, proper voltage must be applied to the outlet or damage to the light fixture will occur.\nThis explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics. \n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr align=\"center\"\u003e\n\u003ctd\u003eEnergy Consumption Comparison\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eMetal Halide\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eWattage\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e400 watts\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e150 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 120V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e3.83 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.25 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 220V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e2.09 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.68 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 240V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.92 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.63 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n \u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 277V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.66 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.54 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 12V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e38.33 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e12.5 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 24V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e19.12 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e6.25 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eLamp Life Expectancy\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e20,000 hours\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e50,000+ hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eOperation cost per year\n(12hs\/day @ 12c\/kWh)\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$241.78\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$78.84\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\" colspan=\"3\"\u003eEach LED light fixture has the potential to save $150.00+ per year in electricty alone, not including maintainence costs, operational downtime, reduced productivity, HVAC loads, or carbon footprint. When retrofitting an entire facility with 100s of light fixtures, the return on investment of LED over metal halide becomes evident. \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nThis LED light produces 21,000 lumens with a color temperature of 5000K and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. We also offer a 3000K warm white and 4000K natural white color temperature options (longer lead times may apply for non-standard temperatures). The EPL-HB-150LED-RT-150-EPP offers several mounting options including ceiling mounting, pendant mounting, wall mounting and cable mounting. The standard version of this explosion proof LED fixture includes a pendant mount and a surface mount option. \n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264254431413,"sku":"PL3-EPL-HB-150LED-RT-150-EPP","price":4106.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-HB-150LED-RT-150-EPP.jpg?v=1628397791"},{"product_id":"pl3-epl-led-2x150w-rt","title":"C1D1 Explosion Proof 300 Watt LED Flood Light Fixture - Paint Spray Booth Approved - 35,000 Lumens","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eEPL-LED-2X150W-RT Explosion Proof LED Flood Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eListing: United States - Canada\u003c\/td\u003e\n\u003ctd\u003eListed for United States and Canada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Type: Cree LED\u003c\/td\u003e\n\u003ctd\u003eClass I, Divisions 1 \u0026amp; 2, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 28\"H x 16\"W 5\"D\u003c\/td\u003e\n\u003ctd\u003eClass II, Divisions 1 \u0026amp; 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 68 lbs\u003c\/td\u003e\n\u003ctd\u003eClass III, Divisions 1 \u0026amp; 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eVoltage: 100-277 Volts AC, 50\/60Hz or 11-25 Volts AC\/DC\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eCertified to UL 844 Ed. 13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 300W\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 1598\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 35,000 \u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 137 Rev 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 116.67 Lm\/W\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 250.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 60,000+ Hours\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 30-M-1986 Rev 2012\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 5000K, 4000K, 3000K\u003c\/td\u003e\n\u003ctd\u003eT5 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: \u0026gt;75 CRI\u003c\/td\u003e\n\u003ctd\u003ePaint Spray Booth Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle: 60° or 125°\u003c\/td\u003e\n\u003ctd\u003eIEC 60529 Tested\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003eIP67 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Efficiency: \u0026gt;95%\u003c\/td\u003e\n\u003ctd\u003eLEL Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor: 0.992\u003c\/td\u003e\n\u003ctd\u003eMultiple Driver Banks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range:-50° C to +65°C\u003c\/td\u003e\n\u003ctd\u003e80% Lumen Retention after 60,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp Rating: T5\u003c\/td\u003e\n\u003ctd\u003eFactory Sealed Light Fixture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Copper Free Cast Aluminum\u003c\/td\u003e\n\u003ctd\u003eRecommended 15` to 40` Mounting Height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Finish: Epoxy Powder Coated - Grey\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: Hardened Borosilicate Glass\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGasket Material: Silicone\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: 3\/4€ Pendant \u0026amp; Swivel Mount - Both Ship w\/ Fixture\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring Hub: 3\/4\" NPT\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Driver Specs\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage: 100-277 Volts AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Current: 3.6A Max\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor: \u0026gt;98%\u003c\/td\u003e\n\u003ctd\u003eToll Free: 1-800-369-6671\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficiency: \u0026gt;88%\u003c\/td\u003e\n\u003ctd\u003eIntl: 1-214-616-6180\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Voltage: 54V Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Current: 2.1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA\nThe Larson Electronics EPL-LED-2X150W-RT Explosion Proof LED Flood light fixture provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older fixtures. \n***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*** \nThis Class 1 Division 1 \u0026amp; 2, Class 2 Division 1 \u0026amp; 2 explosion proof flood light fixture provides 35,000 of high quality light while drawing only 300 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install. \nThe explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twenty-four individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.\nUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr align=\"center\"\u003e\n\u003ctd\u003eEnergy Consumption Comparison\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eMetal Halide\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eWattage\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e800 watts\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e300 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 120V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e7.66 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e2.5 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 220V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e4.18 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.36 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 240V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e3.84 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.26 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 277V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e3.32 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.08 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 12V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e76.66 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e25 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 24V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e38.24 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e12.5 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eLamp Life Expectancy\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e20,000 hours\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e50,000+ hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eOperation cost per year\n(12hs\/day @ 12c\/kWh)\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$483.56\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$157.68\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\" colspan=\"3\"\u003eEach LED light fixture has the potential to save $300.00+ per year in electricity alone, not including maintenance costs, operational downtime, reduced productivity, HVAC loads, or carbon footprint. When retrofitting an entire facility with 100s of light fixtures, the return on investment of LED over metal halide becomes evident. \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nThis LED light produces 17,500 lumens with a color temperature of 5000K and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. We also offer a 3000K warm white and 4000K natural white color temperature options (longer lead times may apply for non-standard temperatures).\n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eHigh Quality Features\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 212px;\"\u003e\n1. Low power consumption.\n2. Instant on\/off operation.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. Superior color rendering compared to HPS, LPS, MH.\n5. Retains 80% lumen output after 60,000 operating hours.\n6. Powder coated aluminum fixture body. \n7. Pendant and Swivel Bracket mount included\n8. Low profile - Light weight\n9. 35,000 Lumen output from only 300 watts\n\u003c\/td\u003e\n\u003ctd\u003e\n1. 60,000 hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off €“ No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264254693557,"sku":"PL3-EPL-LED-2X150W-RT","price":9046.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-LED-2X150W-RT.jpg?v=1628397778"},{"product_id":"pl3-epl-hb-150led-rt-140db-200-epp","title":"C1D1 Explosion Proof 150 Watt High Bay LED Light Fixture-Paint Booth Approved-200' w\/ EXP Plug","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eEPL-HB-150LED-RT-140DB-200-EPP - C1D1 High Bay LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eListing: United States - Canada\u003c\/td\u003e\n\u003ctd\u003eListed for United States and Canada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: Cree LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass I, Divisions 1 \u0026amp; 2, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 14\"H x 16\"W 5\"D\u003c\/td\u003e\n\u003ctd\u003eClass II, Divisions 1 \u0026amp; 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 32 lbs\u003c\/td\u003e\n\u003ctd\u003eClass III, Divisions 1 \u0026amp; 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 100-277 Volts AC, 50\/60Hz or 11-25 Volts AC\/DC\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 844 Ed. 13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 150W\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 1598\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 21,000\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 137 Rev 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficiency: 140 Lm\/W\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 250.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 60,000+ Hours\u003c\/td\u003e\n\u003ctd\u003eT5 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 5600K, 5000K, 4500K, 4000K, 3500K, 3000K, 2700K, or 6500K\u003c\/td\u003e\n\u003ctd\u003ePaint Spray Booth Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: \u0026gt;75 CRI\u003c\/td\u003e\n\u003ctd\u003eIEC 60529 Tested\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle: 60°, 125°, or 140°\u003c\/td\u003e\n\u003ctd\u003eIP67 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003eLEL Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNEMA Type (Lighting): 6H x 6V (60° Optics); 6H x 6V (125° Optics); 6H x 7V (140° Optics)\u003c\/td\u003e\n\u003ctd\u003eMultiple Driver Banks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIES Classification: Type I (60° Optics); Type VS (125° Optics); Type VS (140° Optics)\u003c\/td\u003e\n\u003ctd\u003e80% Lumen Retention after 60,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal Classification: Very Short (60° Optics); Very Short (125° Optics); Short (140° Optics)\u003c\/td\u003e\n\u003ctd\u003eFactory Sealed Light Fixture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutoff Classification: Cutoff\u003c\/td\u003e\n\u003ctd\u003eRecommended 15` to 40` Mounting Height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCIE Type: Direct\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBUG Rating: B5-U1-G1 (60° Optics); B4-U1-G1 (125° Optics); B4-U1-G2 (140° Optics)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Efficiency: \u0026gt;95%\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor: 0.992\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range:-50° C to +65°C\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp Rating: T5\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Copper Free Cast Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: Hardened Borosilicate Glass\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGasket Material: Silicone\u003c\/td\u003e\n\u003ctd\u003eToll Free: 1-800-369-6671\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: 3\/4€ Pendant \u0026amp; Swivel Mount - Both Ship w\/ Fixture\u003c\/td\u003e\n\u003ctd\u003eIntl: 1-214-616-6180\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: 200` 14\/3 SOOW Cord Explosion Proof Plug\u003c\/td\u003e\n\u003ctd\u003eFax: 1-903-498-3364\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCord Cap: 5-15, 5-20, or 6-20\u003c\/td\u003e\n\u003ctd\u003eE-mail: \n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe Larson Electronics EPL-HB-150LED-RT-140DB-200-EPP Explosion Proof High Bay light fixture provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older incandescent, metal halide and high pressure sodium lights.  \nThis Class 1 Division 1 \u0026amp; 2, Class 2 Division 1 \u0026amp; 2 explosion proof light fixture provides 21,000 of high quality light while drawing only 150 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nThe explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twelve individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.\nUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.\n\u003ctable width=\"578\" border=\"1\"\u003e\n\n\u003ctr\u003e\n\u003ctd colspan=\"3\"\u003eClick Photos to Enlarge \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e60° Beam Angle \u003c\/td\u003e\n\u003ctd\u003e125° Beam Angle Plug \u003c\/td\u003e\n\u003ctd\u003e140° Beam Angle Plug \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nBeam Angles: When used as a fixed mount fixture, the varying beam angles need to be mounted at certain heights in order to achieve the greatest coverage and efficiency in both high bay and low bay lighting situations. The 60° beam should be mounted in high bay fixtures over 25` in height and 25` away from objects if used as a wall mounted light. The 125° beam is ideal for low bay fixtures in a height range of 15-25 feet and the same distance away from objects when the wall mounting option is employed. The 140° beam is best used as a low bay fixture in areas with a ceiling height of 15` or less or for illuminating objects up to 15` away when wall mounted.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n \u003ctd colspan=\"3\"\u003eClick Photos to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5-15 Straight Blade Plug \u003c\/td\u003e\n\u003ctd\u003e5-20 Straight Blade Plug \u003c\/td\u003e\n\u003ctd\u003e6-20 Straight Blade Plug \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nWiring \u0026amp; Plug: This explosion proof tower mounted flood lighting system is equipped with 200 foot of 14\/3 chemical and abrasion resistant SOOW cord that is fitted with an explosion proof cord cap for easy connection to explosion proof outlets. Plug options include a 5-15 15 amp straight blade plug for use with 120V explosion proof outlets, a 5-20 20 amp straight blade plug for use with 120V explosion proof outlets, or a 6-20 20 amp straight blade plug for use with 220-240V explosion proof outlets. **PLEASE NOTE** voltage ratings on plugs and outlets are MAXIMUM voltage. For low voltage applications, proper voltage must be applied to the outlet or damage to the light fixture will occur\nThis explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics. \n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr align=\"center\"\u003e\n\u003ctd\u003eEnergy Consumption Comparison\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eMetal Halide\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eWattage\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e400 watts\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e150 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 120V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e3.83 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.25 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 220V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e2.09 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.68 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 240V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.92 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.63 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 277V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.66 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.54 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 12V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e38.33 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e12.5 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 24V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e19.12 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e6.25 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eLamp Life Expectancy\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e20,000 hours\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e50,000+ hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eOperation cost per year\n(12hs\/day @ 12c\/kWh)\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$241.78\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$78.84\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\" colspan=\"3\"\u003eEach LED light fixture has the potential to save $150.00+ per year in electricity alone, not including maintenance costs, operational downtime, reduced productivity, HVAC loads, or carbon footprint. When retrofitting an entire facility with 100s of light fixtures, the return on investment of LED over metal halide becomes evident. \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nThis LED light produces 21,000 lumens with a color temperature of 5000K and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. We also offer a 3000K warm white and 4000K natural white color temperature options (longer lead times may apply for non-standard temperatures). The EPL-HB-150LED-RT-140DB-200-EPP offers several mounting options including ceiling mounting, pendant mounting, wall mounting and cable mounting. The standard version of this explosion proof LED fixture includes a pendant mount and a surface mount option. \n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eHigh Quality Features\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 212px;\"\u003e\n1. Low power consumption.\n2. Instant on\/off operation.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. Superior color rendering compared to HPS, LPS, MH.\n5. Retains 80% lumen output after 60,000 operating hours.\n6. Powder coated aluminum fixture body. \n7. Pendant and Swivel Bracket mount included\n8. Low profile - Light weight\n9. 21,000 Lumen output from 150 watts\n\u003c\/td\u003e\n\u003ctd\u003e\n1. 60,000 hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off €“ No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264254759093,"sku":"PL3-EPL-HB-150LED-RT-140DB-200-EPP","price":4234.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-HB-150LED-RT-140DB-200-EPP.jpg?v=1628397786"},{"product_id":"pl3-epl-hb-150led-rt-140db-150-epp","title":"C1D1 Explosion Proof 150 Watt High Bay LED Light Fixture-Paint Booth Approved -150' w\/ EXP Plug","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eEPL-HB-150LED-RT-140DB-150-EPP - C1D1 High Bay LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eListing: United States - Canada\u003c\/td\u003e\n\u003ctd\u003eListed for United States and Canada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: Cree LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass I, Divisions 1 \u0026amp; 2, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 14\"H x 16\"W 5\"D\u003c\/td\u003e\n\u003ctd\u003eClass II, Divisions 1 \u0026amp; 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 32 lbs\u003c\/td\u003e\n\u003ctd\u003eClass III, Divisions 1 \u0026amp; 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 100-277 Volts AC, 50\/60Hz or 11-25 Volts AC\/DC\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 844 Ed. 13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 150W\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 1598\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 21,000\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 137 Rev 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficiency: 140 Lm\/W\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 250.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 60,000+ Hours\u003c\/td\u003e\n\u003ctd\u003eT5 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 5600K, 5000K, 4500K, 4000K, 3500K, 3000K, 2700K, or 6500K\u003c\/td\u003e\n\u003ctd\u003ePaint Spray Booth Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: \u0026gt;75 CRI\u003c\/td\u003e\n\u003ctd\u003eIEC 60529 Tested\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle: 60°, 125°, or 140°\u003c\/td\u003e\n\u003ctd\u003eIP67 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003eLEL Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNEMA Type (Lighting): 6H x 6V (60° Optics); 6H x 6V (125° Optics); 6H x 7V (140° Optics)\u003c\/td\u003e\n\u003ctd\u003eMultiple Driver Banks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIES Classification: Type I (60° Optics); Type VS (125° Optics); Type VS (140° Optics)\u003c\/td\u003e\n\u003ctd\u003e80% Lumen Retention after 60,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal Classification: Very Short (60° Optics); Very Short (125° Optics); Short (140° Optics)\u003c\/td\u003e\n\u003ctd\u003eFactory Sealed Light Fixture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutoff Classification: Cutoff\u003c\/td\u003e\n\u003ctd\u003eRecommended 15` to 40` Mounting Height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCIE Type: Direct\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBUG Rating: B5-U1-G1 (60° Optics); B4-U1-G1 (125° Optics); B4-U1-G2 (140° Optics)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Efficiency: \u0026gt;95%\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor: 0.992\u003c\/td\u003e\n\u003ctd\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range:-50° C to +65°C\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp Rating: T5\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Copper Free Cast Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: Hardened Borosilicate Glass\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGasket Material: Silicone\u003c\/td\u003e\n\u003ctd\u003eToll Free: 1-800-369-6671\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: 3\/4€ Pendant \u0026amp; Swivel Mount - Both Ship w\/ Fixture\u003c\/td\u003e\n\u003ctd\u003eIntl: 1-214-616-6180\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: 150` 16\/3 SOOW Cord Explosion Proof Plug\u003c\/td\u003e\n\u003ctd\u003eFax: 1-903-498-3364\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCord Cap: 5-15, 5-20, or 6-20\u003c\/td\u003e\n\u003ctd\u003eE-mail: \n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe Larson Electronics EPL-HB-150LED-RT-140DB-150-EPP Explosion Proof High Bay light fixture provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. Cree LED technology and  a compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older incandescent, metal halide and high pressure sodium lights.  \nThis Class 1 Division 1 \u0026amp; 2, Class 2 Division 1 \u0026amp; 2 explosion proof light fixture provides 21,000 lumens of high quality light while drawing only 150 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nThe explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twelve individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.\nUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.\n\u003ctable width=\"578\" border=\"1\"\u003e\n\n\u003ctr\u003e\n\u003ctd colspan=\"3\"\u003eClick Photos to Enlarge \u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e60° Beam Angle \u003c\/td\u003e\n\u003ctd\u003e125° Beam Angle Plug \u003c\/td\u003e\n\u003ctd\u003e140° Beam Angle Plug \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nBeam Angles: When used as a fixed mount fixture, the varying beam angles need to be mounted at certain heights in order to achieve the greatest coverage and efficiency in both high bay and low bay lighting situations. The 60° beam should be mounted in high bay fixtures over 25` in height and 25` away from objects if used as a wall mounted light. The 125° beam is ideal for low bay fixtures in a height range of 15-25 feet and the same distance away from objects when the wall mounting option is employed. The 140° beam is best used as a low bay fixture in areas with a ceiling height of 15` or less or for illuminating objects up to 15` away when wall mounted.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd colspan=\"3\"\u003eClick Photos to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5-15 Straight Blade Plug \u003c\/td\u003e\n\u003ctd\u003e5-20 Straight Blade Plug \u003c\/td\u003e\n\u003ctd\u003e6-20 Straight Blade Plug \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nWiring \u0026amp; Plug: This explosion proof fixture is equipped with 150 foot of 16\/3 chemical and abrasion resistant SOOW cord that is fitted with an explosion proof cord cap for easy connection to explosion proof outlets. Plug options include a 5-15 15 amp straight blade plug for use with 120V explosion proof outlets, a 5-20 20 amp straight blade plug for use with 120V explosion proof outlets, or a 6-20 20 amp straight blade plug for use with 220-240V explosion proof outlets. **PLEASE NOTE** voltage ratings on plugs and outlets are MAXIMUM voltage. For low voltage applications, proper voltage must be applied to the outlet or damage to the light fixture will occur.\nThis explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics. \n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr align=\"center\"\u003e\n\u003ctd\u003eEnergy Consumption Comparison\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eMetal Halide\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eWattage\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e400 watts\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e150 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 120V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e3.83 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.25 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 220V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e2.09 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.68 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 240V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.92 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.63 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 277V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.66 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.54 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 12V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e38.33 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e12.5 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 24V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e19.12 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e6.25 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eLamp Life Expectancy\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e20,000 hours\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e50,000+ hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eOperation cost per year\n(12hs\/day @ 12c\/kWh)\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$241.78\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$78.84\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\" colspan=\"3\"\u003eEach LED light fixture has the potential to save $150.00+ per year in electricity alone, not including maintenance costs, operational downtime, reduced productivity, HVAC loads, or carbon footprint. When retrofitting an entire facility with 100s of light fixtures, the return on investment of LED over metal halide becomes evident. \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nThis LED light produces 21,000 lumens with a color temperature of 5000K and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. We also offer a 3000K warm white and 4000K natural white color temperature options (longer lead times may apply for non-standard temperatures). The EPL-HB-150LED-RT-140DB-150-EPP offers several mounting options including ceiling mounting, pendant mounting, wall mounting and cable mounting. The standard version of this explosion proof LED fixture includes a pendant mount and a surface mount option. \n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eHigh Quality Features\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 212px;\"\u003e\n1. Low power consumption.\n2. Instant on\/off operation.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. Superior color rendering compared to HPS, LPS, MH.\n5. Retains 80% lumen output after 60,000 operating hours.\n6. Powder coated aluminum fixture body. \n7. Pendant and Swivel Bracket mount included\n8. Low profile - Light weight\n9. 21,000 Lumen output from 150 watts\n \n \n \n\u003c\/td\u003e\n\u003ctd\u003e\n1. 60,000 hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off €“ No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264254824629,"sku":"PL3-EPL-HB-150LED-RT-140DB-150-EPP","price":4106.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-HB-150LED-RT-140DB-150-EPP.jpg?v=1628397788"},{"product_id":"pl3-epl-hb-150led-rt-cm","title":"Ceiling Mount Explosion Proof 150 Watt High Bay LED Light Fixture - Paint Spray Booth Approved","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eEPL-HB-150LED-RT-CM - C1D1 High Bay LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eListing: United States - Canada\u003c\/td\u003e\n\u003ctd\u003eListed for United States and Canada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: Cree LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass I, Divisions 1 \u0026amp; 2, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 14\"H x 16\"W x 11\"D\u003c\/td\u003e\n\u003ctd\u003eClass II, Divisions 1 \u0026amp; 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 35 lbs\u003c\/td\u003e\n\u003ctd\u003eClass III, Divisions 1 \u0026amp; 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 100-277 Volts AC, 50\/60Hz or 11-25 Volts AC\/DC\u003c\/td\u003e\n\u003ctd\u003eATEX EX II 3G Exd IIB T5 Ga\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 150W\u003c\/td\u003e\n\u003ctd\u003eATEX EX II 3D Exd IIA T5 Da\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 21,000\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 844 Ed. 13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficiency: 140 Lm\/W\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 1598\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 60,000+ Hours\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 137 Rev 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 5600K, 5000K, 4500K, 4000K, 3500K, 3000K, 2700K, or 6500K\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 250.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: \u0026gt;75 CRI\u003c\/td\u003e\n\u003ctd\u003eCertified to ATEX 94\/9\/EC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle: 60°, 125°, or 140°\u003c\/td\u003e\n\u003ctd\u003eT5 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003ePaint Spray Booth Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNEMA Type (Lighting): 6H x 6V (60° Optics); 6H x 6V (125° Optics); 6H x 7V (140° Optics)\u003c\/td\u003e\n\u003ctd\u003eIEC 60529 Tested\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIES Classification: Type I (60° Optics); Type VS (125° Optics); Type VS (140° Optics)\u003c\/td\u003e\n \u003ctd\u003eIP67 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal Classification: Very Short (60° Optics); Very Short (125° Optics); Short (140° Optics)\u003c\/td\u003e\n\u003ctd\u003eLEL Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutoff Classification: Cutoff\u003c\/td\u003e\n\u003ctd\u003eMultiple Driver Banks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCIE Type: Direct\u003c\/td\u003e\n\u003ctd\u003e80% Lumen Retention after 60,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBUG Rating: B5-U1-G1 (60° Optics); B4-U1-G1 (125° Optics); B4-U1-G2 (140° Optics)\u003c\/td\u003e\n\u003ctd\u003eFactory Sealed Light Fixture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Efficiency: \u0026gt;95%\u003c\/td\u003e\n\u003ctd\u003eRecommended 15` to 40` Mounting Height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor: 0.992\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range:-50° C to +65°C\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp Rating: T5\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Copper Free Cast Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: Hardened Borosilicate Glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGasket Material: Silicone\u003c\/td\u003e\n\u003ctd\u003eToll Free: 1-800-369-6671\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Ceiling Mount Junction Box\u003c\/td\u003e\n\u003ctd\u003eIntl: 1-214-616-6180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: (3) 3\/4\" NPT Hubs on Ceiling Mount\u003c\/td\u003e\n\u003ctd\u003eFax: 1-903-498-3364\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring Hub: 3\/4\" NPT\u003c\/td\u003e\n\u003ctd\u003eE-mail: \n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe Larson Electronics EPL-HB-150LED-RT-CM Ceiling Mount Explosion Proof High Bay light fixture provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older incandescent, metal halide and high pressure sodium lights.  \nThis Class 1 Division 1 \u0026amp; 2, Class 2 Division 1 \u0026amp; 2 explosion proof light fixture provides 21,000 of high quality light while drawing only 150 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 25px;\"\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e Click Photo to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 83px;\"\u003e\nThis explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twelve individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.\nUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied and emit light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.\nThis light is universal voltage capable and can be operated with 100-277 VAC, 50\/60Hz. We also offer a low voltage version of this LED fixture that operates on AC\/DC voltages from 11-25 Volts. This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics. \nThis LED light produces 21,000 lumens with a color temperature of 5000K and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. We also offer a 3000K warm white and 4000K natural white color temperature options (longer lead times may apply for non-standard temperatures). The EPL-HB-150LED-RT-CM offers several mounting options including ceiling mounting, pendant mounting, wall mounting and cable mounting. The standard version of this explosion proof LED fixture includes a flat surface ceiling mount with four 3\/4\" NPT entries. \n\n\u003ctable width=\"100%\" border=\"0\" cellpadding=\"2\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eHigh Quality Features\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 212px;\"\u003e\n1. Low power consumption.\n2. Instant on\/off operation.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. Superior color rendering compared to HPS, LPS, MH.\n5. Retains 80% lumen output after 60,000 operating hours.\n6. Powder coated aluminum fixture body. \n7. Ceiling mount included w\/ 3\/4\" knock outs\n8. Low profile - Light weight\n9. 21,000 Lumen output from 150 watts\n\u003c\/td\u003e\n\u003ctd\u003e\n1. 60,000 hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off €“ No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264255414453,"sku":"PL3-EPL-HB-150LED-RT-CM","price":3404.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-HB-150LED-RT-CM.jpg?v=1628397797"},{"product_id":"pl3-epl-hb-150led-rt-dlc","title":"Class 1 Division 1 Explosion Proof 150 Watt High Bay LED Light Fixture - Paint Spray Booth Approved","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eEPL-HB-150LED-RT-DLC - C1D1 High Bay LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eListing: United States - Canada\u003c\/td\u003e\n\u003ctd\u003eListed for United States and Canada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass I, Divisions 1 \u0026amp; 2, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 14\"H x 16\"W 5\"D\u003c\/td\u003e\n\u003ctd\u003eClass II, Divisions 1 \u0026amp; 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 32 lbs\u003c\/td\u003e\n\u003ctd\u003eClass III, Divisions 1 \u0026amp; 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 100-277 Volts AC, 50\/60Hz or 11-25 Volts AC\/DC\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 844 Ed. 13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 150W\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 1598\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 21,000\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 137 Rev 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficiency: 140 Lm\/W\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 250.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 60,000+ Hours\u003c\/td\u003e\n\u003ctd\u003eT5 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 5000K\u003c\/td\u003e\n\u003ctd\u003ePaint Spray Booth Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: \u0026gt;75 CRI\u003c\/td\u003e\n\u003ctd\u003eIEC 60529 Tested\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle: 60° or 125°\u003c\/td\u003e\n\u003ctd\u003eIP67 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003eLEL Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNEMA Type (Lighting): 6H x 6V (60° Optics); 6H x 6V (125° Optics); 6H x 7V (140° Optics)\u003c\/td\u003e\n\u003ctd\u003eMultiple Driver Banks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIES Classification: Type I (60° Optics); Type VS (125° Optics); Type VS (140° Optics)\u003c\/td\u003e\n\u003ctd\u003e80% Lumen Retention after 60,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal Classification: Very Short (60° Optics); Very Short (125° Optics); Short (140° Optics)\u003c\/td\u003e\n\u003ctd\u003eFactory Sealed Light Fixture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutoff Classification: Cutoff\u003c\/td\u003e\n\u003ctd\u003eRecommended 15` to 40` Mounting Height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCIE Type: Direct\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBUG Rating: B5-U1-G1 (60° Optics); B4-U1-G1 (125° Optics); B4-U1-G2 (140° Optics)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Efficiency: \u0026gt;95%\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor: 0.992\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range:-50° C to +65°C\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp Rating: T5\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Copper Free Cast Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: Hardened Borosilicate Glass\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGasket Material: Silicone\u003c\/td\u003e\n\u003ctd\u003eToll Free: 1-800-369-6671\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: 3\/4€ Pendant \u0026amp; Swivel Mount - Both Ship w\/ Fixture\u003c\/td\u003e\n\u003ctd\u003eIntl: 1-214-616-6180\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: 10` 16\/3 SOOW w\/ Flying Leads\u003c\/td\u003e\n\u003ctd\u003eFax: 1-903-498-3364\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring Hub: 3\/4\" NPT\u003c\/td\u003e\n\u003ctd\u003eE-mail: \n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nBuy American Compliant\nThe Larson Electronics EPL-HB-150LED-RT-DLC Explosion Proof High Bay light fixture provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older incandescent, metal halide and high pressure sodium lights.  \nThis Class 1 Division 1 \u0026amp; 2, Class 2 Division 1 \u0026amp; 2 explosion proof light fixture provides 21,000 lumens of high quality light while drawing only 150 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 83px;\"\u003e\nThe explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twelve individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.\nUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.\nThis light is universal voltage capable and can be operated with 100-277 VAC, 50\/60Hz. We also offer a low voltage version of this LED fixture that operates on AC\/DC voltages from 11-25 Volts. This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics. \nThis LED light produces 21,000 lumens with a color temperature of 5000K and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. The EPL-HB-150LED-RT-DLC offers several mounting options including ceiling mounting, pendant mounting, wall mounting and cable mounting. The standard version of this explosion proof LED fixture includes a pendant mount and a surface mount option. \n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eHigh Quality Features\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 212px;\"\u003e\n1. Low power consumption.\n2. Instant on\/off operation.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. Superior color rendering compared to HPS, LPS, MH.\n5. Retains 80% lumen output after 60,000 operating hours.\n6. Powder coated aluminum fixture body. \n7. Pendant and Swivel Bracket mount included\n8. Low profile - Light weight\n9. 21,000 Lumen output from 150 watts\n\n\n\n\n\n\n\n\n\n\u003c\/td\u003e\n\u003ctd\u003e\n1. 60,000 hour lifespan.\n 2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off €“ No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264255512757,"sku":"PL3-EPL-HB-150LED-RT-DLC","price":3410.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-HB-150LED-RT-DLC_1f81a87d-f235-4c28-b892-046f7097aae7.jpg?v=1628397843"},{"product_id":"pl3-epl-emg-48-2l-led-v2-3h","title":"Larson Explosion Proof Emergency LED Light - 4' 2 Lamp - 3 Hour Backup Ballast - C1\u00262D1 - Paint Spray Booth","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003eMade in the USA\r\u003cbr\u003eThe EPL-EMG-48-2L-LED-V2-3H from Larson Electronics is an Explosion Proof Emergency LED Light Fixture is NRTL Listed for United States and Canada Class I Divisions 1 \u0026amp; 2 and Class II Divisions 1 and 2 for areas where flammable chemical\/petrochemical vapors exist or have the potential to exist. This failsafe explosion proof LED light has a T6 temperature rating and carries a paint spray booth light certification, making it ideal for applications such as paint booths, oil rigs, offshore applications, petrochemical, manufacturing, chemical storage, water treatment centers, and food processing plants.\r\u003cbr\u003eThis four foot, two lamp emergency LED fixture is ideal for operators seeking a top quality explosion proof light that will reduce operating costs, improve lighting quality and reduce downtime incurred from frequent servicing intervals. The EPL-EMG-48-2L-LED-V2-3H is equipped with Larson Electronics` specially designed LED T-series bulbs which produce 4,500 lumens, resulting in 30% more foot candles of illumination at 8 feet as compared to standard T8 lamps when measured with an Extech light meter. Our LED-T series bulbs are visibly brighter than standard T8`s and have consistently surprised many of our customers with their unexpectedly high light output levels.\r\u003cbr\u003eWe now offer our second generation LED tube lamps with this fixture which have increased this hazardous location light’s performance. This two lamp explosion proof LED linear fixture is lighter in weight, has a slimmer profile, and produces more light than traditional explosion proof fluorescent fixtures. The four foot long LED tube design bulbs included with this unit are rated at 50,000 hours of service life, which is over twice as long as standard T8 bulbs.\r\u003cbr\u003eThis emergency backup LED light works, mounts and is wired like our EPL-48-2L-LED explosion proof LED light fixtures. The main difference is that we add a battery backup unit that adds emergency light functionality to the fixture. With an integrated emergency ballast, this explosion proof LED light will continue to operate one LED lamp for three hours at 2,250 lumens after the main electrical power to the light is severed. Once standard electrical power is restored, the emergency battery pack will be recharged. The battery backup unit includes a switched leg for turning the light fixture on\/off without kicking the unit into emergency mode.\r\u003cbr\u003eThis fixture carries a T6 temperature rating and is approved for Class I Division 1, Groups C and D, Class I, Division 2, Group A, B, C and D, and Class II, Division 1 and 2, Groups E, F and G environments where flammable or combustible gases, vapors, dusts, fibers, and flying exist or stand the potential to exist. This LED linear fixture is approved for use in confined spaces.\r\r\u003cbr\u003eThe included LED lamps have a 50,000+ hour service life, both of which result in extreme efficiency and greatly reduced maintenance costs. These fluorescent style LED lamps have internal drivers, eliminating external power components. The solid state design of the LED lamps give this fixture superior resistance to damage from vibration, extremes in temperature and a lamp service life over twice that of standard fluorescent bulbs. This second generation lamp is offered in 5600K cool white, 4500K natural white, and 3000K warm white. Our standard unit ships with 5600K unless different color temperature is specified.\r\u003cbr\u003eUnlike the glass tube design of traditional fluorescent lamps, these LED T-Style lamps have no filaments or fragile housings to break during operation. Instead of using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. The LED assembly is mounted to the \"tube\" constructed from extruded aluminum, with a polycarbonate lens protecting the LEDs. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than fluorescent lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional fluorescent lighting.\r\u003cbr\u003eThe 18 watt LED lamps produce 30% more illumination than standard T8 bulbs while offering lower amp draw and increased reliability. Each lamp produces 2,250 lumens at 125 lumens per watt, for a combined 4,500 total lumen light output. An EPL-EMG-48-2L-T8 explosion proof fluorescent light, with a combined total of 64 watts, draws 0.56 amps at 120 volts AC. This LED version of the same light, with a total of 36 watts, draws only 0.32 amps at 120 volts AC. The EPL-EMG-48-2L-LED-V2-3H is universal voltage, not multi-tap, and operates on any voltage from 120V to 277V AC 50\/60hz without any modifications. We also make a 12\/24V AC\/DC version for low voltage applications for AC or DC power.\r\u003cbr\u003eEnergy Consumption Comparison\r\u003cbr\u003eT5HO\r\u003cbr\u003eT8\r\u003cbr\u003eLED\r\u003cbr\u003eWattage\r\u003cbr\u003e108 watts\r\u003cbr\u003e64 watts\r\u003cbr\u003e36 watts\r\u003cbr\u003eAmp Draw @ 120V AC\r\u003cbr\u003e0.90 amps\r\u003cbr\u003e0.54 amps\r\u003cbr\u003e0.32 amps\r\u003cbr\u003eAmp Draw @ 220V AC\r\u003cbr\u003e0.49 amps\r\u003cbr\u003e0.29 amps\r\u003cbr\u003e0.17 amps\r\u003cbr\u003eAmp Draw @ 240V AC\r\u003cbr\u003e0.45 amps\r\u003cbr\u003e0.27 amps\r\u003cbr\u003e0.16 amps\r\u003cbr\u003eAmp Draw @ 277V AC\r\u003cbr\u003e0.39 amps\r\u003cbr\u003e0.24 amps\r\u003cbr\u003e0.14 amps\r\u003cbr\u003eAmp Draw @ 12V DC\r\u003cbr\u003e9 amps\r\u003cbr\u003e5.34 amps\r\u003cbr\u003e3 amps\r\u003cbr\u003eAmp Draw @ 24V DC\r\u003cbr\u003e4.5 amps\r\u003cbr\u003e2.67 amps\r\u003cbr\u003e1.5 amps\r\u003cbr\u003eLamp Life Expectancy\r\u003cbr\u003e20,000 hours\r\u003cbr\u003e24,000 hours\r\u003cbr\u003e50,000 hours\r\u003cbr\u003eOperation cost per year\r\u003cbr\u003e$56.77\r\u003cbr\u003e$33.64\r\u003cbr\u003e$18.92\r\u003cbr\u003eOur EPL-EMG-48-2L-LED-V2-3H LED light fixture is NRTL Listed for United States and Canada approved for use in paint spray booths. Please note, according to the NEC, using threaded rigid pipe does not require additional seal offs with this fixture. An EYM and seal off is necessary for flex conduit or other non-rigid pipe implementations.\r\u003cbr\u003eMounting Options:\r\u003cbr\u003eUnless otherwise specified, our standard, most popular configuration is the bracket end mounting shown enlarged below. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit). Additional mounting configurations can be customized to meet the requirements on the application. Please contact us for special mounting configurations.\r\u003cbr\u003eAdjustable Surface Mount Brackets:\r\u003cbr\u003eEach bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg.\r\u003cbr\u003e\u003cstrong\u003eSuspension Mounting:\u003c\/strong\u003e\r\u003cbr\u003ePendant mount fixtures hang from the ceiling and are suspended by rigid pipe. Each fixture features a 1\/2\" NPT junction box on one end, and a 1\/2\" NPT adjustable L-bracket on the other end of the fixture. Operators bring rigid pipe down to the threaded mounting hubs. Wiring is fed down through the rigid pipe to the junction box and tied in to the fixture`s lead wires, completing the electrical connection. The adjustable L-shape mounting bracket provides support for the opposite end of the fixture.\r\u003cbr\u003e\u003cstrong\u003eSuggested \u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/strong\u003e\r\u003cbr\u003ePaint spray booths, aircraft maintenance, oil drilling rigs, refineries, solvent and cleaning areas, gas processing plants, chemical manufacturing, waste treatment plants, gas processing plants.\r\u003cbr\u003eContact info@purilite.ca\r for more information about our custom options tailored to meet your specific industry needs.\r\u003cbr\u003eMade in USA Quality\r\u003cbr\u003eSuperior LED Benefits\r\u003cbr\u003e1. Each unit dielectrically tested.\r\u003cbr\u003e1. 50,000 hour lifespan.\u003cbr\u003e\u003cbr\u003eSpecifications\u003cbr\u003eNRTL Listed for United States \u0026amp; Canada\u003cbr\u003eUnited States \u0026amp; Canada NRTL Listed for \u003cbr\u003eDimensions:  11.25\"W x 52\"L x 8.5\"H\u003cbr\u003eWeight:  60 Lbs\u003cbr\u003eVoltage:  Universal 120-277V AC, 50\/60 Hz 120\/277V AC, 60Hz\u003cbr\u003eTotal Watts:  36 Watts (18 Watts Per Lamp)\u003cbr\u003eTotal Lumens:  4,500 (2,250 Per Lamp)\u003cbr\u003eLumens on Battery Power:  2,250 (1 Lamp)\u003cbr\u003eLED Lamp Life Expectancy:  50,000+ Hours\u003cbr\u003eLuminous Efficacy:  125 Lumens per Watt\u003cbr\u003eColor Temp:  5600K, 4500K or 3000K\u003cbr\u003eColor Rendering Index:  \u0026gt;80\u003cbr\u003eBeam Angle:  150°\u003cbr\u003ePower Efficiency:  90%\u003cbr\u003ePower Factor:  \u0026gt;0.95\u003cbr\u003eBattery AC Input Voltage:  120\/277V AC, 60Hz\u003cbr\u003eBattery AC Input Current:  90 mA\u003cbr\u003eBattery AC Input Power Rating:  9.5W\u003cbr\u003eBattery Output Current:  120V @ 165mA - 277V @ 72mA\u003cbr\u003eIllumination Time:  3 Hours\u003cbr\u003eBattery Type:  High Temp, Maintenance Free, Nickel Cadmium\u003cbr\u003eBattery Lifespan:  7 to 10 Years\u003cbr\u003eBattery Charge Current:  250 mA\u003cbr\u003eBattery Recharge Time:  24 Hours\u003cbr\u003eAmbient Operating Temp Range:  0°C to +50°C\u003cbr\u003eOperating Temp Rating:  T6 Rated\u003cbr\u003eMinimum Operating Temp:  0°C\u003cbr\u003eMaximum Case Temp:  +50°C\u003cbr\u003eHousing Material:  Cast Aluminum End Caps \u0026amp; Battery Enclosure, Aluminum Reflectors - Copper Free\u003cbr\u003eLens Material:  Hardened Borosilicate Glass Tubes\u003cbr\u003eGasket Material:  Buna Rubber O-Rings\u003cbr\u003eMounting:  Surface Standard - Pendant Optional\u003cbr\u003eWiring Hub:  1\/2\" NPT\u003cbr\u003eWarranty:  5 Years*\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38264255840437,"sku":"PL3-EPL-EMG-48-2L-LED-V2-3H","price":5398.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-EMG-48-2L-LED-V2-3H-1.jpg?v=1610917567"},{"product_id":"pl3-epl-24-4l-led","title":"Larson Explosion Proof LED Paint Spray Booth Fixture - Class I, Div. I - 4, 2 Foot LED Bulbs - 5040 Lumen","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38264255938741,"sku":"PL3-EPL-24-4L-LED","price":6368.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-24-4L-LED-1.jpg?v=1610917586"},{"product_id":"pl3-epluc-48-4l-led","title":"Explosion Proof LED Lights for Paint Booths on Aluminum Upright Cart with Wheels","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eEPLUC-48-4L-LED Explosion Proof\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eU.L. Ratings\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eListing: United States - Canada\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass 1 Division 1, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 24\"-W x 58\"-L x 25.5\"-H\u003c\/td\u003e\n\u003ctd\u003eClass 1 Division 2, Group A,B,C,D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Unit Weight: 180 Lbs\u003c\/td\u003e\n\u003ctd\u003eUL 595 Outdoor Marine Type (Saltwater)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts:  112 watts\u003c\/td\u003e\n\u003ctd\u003eUL 844\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 14,000\u003c\/td\u003e\n\u003ctd\u003eUL 1598 Marine Type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: Universal Voltage 120-277V AC 50\/60Hz or 11-25V AC\/DC\u003c\/td\u003e\n\u003ctd\u003eClass2, Division 1 - 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life Expectancy:  50,000 Hours\u003c\/td\u003e\n\u003ctd\u003eUL Certified Canadian Standards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficiency: 120 Lumens per Watt\u003c\/td\u003e\n\u003ctd\u003eUL listed for Paint Spray Booths\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range:-30° C to +85°C\u003c\/td\u003e\n\u003ctd\u003eCalifornia Title 24 Compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eOperating Temp Rating: T6 Rated\u003c\/td\u003e\n\u003ctd\u003eIP67 Rated - Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMinimum Operating Temp: -30°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMaximum Case Temp: +90°C\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eBeam Angle: 150°\u003c\/td\u003e\n\u003ctd\u003ePhone: 1-214-616-6180\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eColor Temp: 5600K or 4100K\u003c\/td\u003e\n\u003ctd\u003eToll Free: 1-800-369-6671\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting: Portable Upright Aluminum Cart with Adjustable Brackets\u003c\/td\u003e\n\u003ctd\u003eFax: 1-903-498-3364\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: 50 Feet SOOW Cord w\/ Inline On\/Off Switch\u003c\/td\u003e\n\u003ctd\u003eE-mail: \n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA\nThe Larson Electronics EPLUC-48-4L-LED Upright Explosion Proof LED Light Cart is U.S.\/Canada UL Listed Class 1 Division 1, Class 2 Division 1 and offers exceptional lighting versatility and convenience with effective protection to operators working in hazardous locations. Solid rubber tires, unidirectional caster wheels, and a fold down handle gives this light excellent mobility and versatility and makes it an ideal choice for operators who need an effective and safe lighting solution that can be easily applied over a wide variety of applications. \nThe EPLUC-48-4L-LED aluminum upright explosion proof cart is UL listed Class 1 Division 1 and Class 2 Division 1 \u0026amp; 2 and offers the ability to quickly and easily add light wherever it is needed without the need for special considerations of hazardous conditions beyond adhering to the normal rules of ratings and classifications. This unit incorporates a pair of our highly effective  equipped with four LED tube lamps into a mobile cart platform equipped with wheels. The EPLUC-48-4L-LED is equipped with specially designed LED T-series bulbs which produce 30% more light than standard T8 bulbs. The platform is constructed of corrosion resistant aluminum alloy, has non sparking casters, and includes a Class 1 Div 1 explosion proof switch with 50 foot of SOOW electric cable and explosion proof plug as well. \n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 119px;\"\u003e\n\u003ctable height=\"140\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%; height: 113px;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 31%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 36%;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 21px;\"\u003eClick to Enlarge \u003c\/td\u003e\n\u003ctd\u003eClick to Enlarge \u003c\/td\u003e\n\u003ctd\u003eClick to Enlarge \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 119px;\"\u003e\n\u003ctable height=\"140\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%; height: 113px;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 31%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 36%;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 21px;\"\u003eClick to Enlarge \u003c\/td\u003e\n\u003ctd\u003eClick to Enlarge \u003c\/td\u003e\n\u003ctd\u003eClick to Enlarge \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 420px;\"\u003e\nThis upright explosion proof aluminum cart offers an excellent lighting solution for operators who need full power illumination in areas where traditional fixed mount lighting is obstructed or cannot effectively reach. The cart is highly versatile and gives the operator the ability to easily move the entire assembly around the work space simply by leaning the cart back and rolling it into position. Also included is a fold down handle and unidirectional caster wheels that allows operators to lay the unit flat and wheel it into hard to reach areas such as underneath vehicles in paint spray booths.\nWe have eliminated the ballast box normally associated with fluorescent fixtures which reduces overall weight, creates a slimmer unit profile, and helps this fixture maintain a T-6 temperature rating. There is no ballast in this unit and the included LED T-series lamps have a 50,000 hour service life, both of which result in extreme efficiency and greatly reduced maintenance costs. Maintenance is further simplified with interchangeable screw on end caps and O ring seals which allows all relamping to be done from one end of the fixture. \nThe light fixtures used in the EPLUC-48-4L-LED are T6 temperature rated and paint booth certified, and produce a combined total 14,000 lumens of light using four tube style LED bulbs. The lamps are protected by heat and impact resistant Pyrex tubes and heavy wire grates, and the fixtures are constructed of copper free aluminum alloy. The lamp reflectors are corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. Included with this cart is 50 feet of chemical and abrasion resistant cord, explosion proof plug, and an explosion proof inline switch which allows operators to safely control light operation within the hazardous area without the need for inconvenient plugging and unplugging of the fixture.\nThis light cart is universal voltage, not multi-tap, and operates on any voltage from 120V to 277V AC 50\/60hz without any modifications. We also make a 12\/24V AC\/DC version for low voltage applications for AC or DC power. The entire cart and fixture unit is UL Listed for use in paint spray booths and U.L. 1598 -U.L. 595 compliant for wet area and marine use. The cart allows the entire fixture to be easily wheeled into position as needed, and can be laid flat for sliding the cart under vehicles or into hard to reach areas.\nNote: The light fixture used in this cart is compatible with the usual options associated with the EPLUC-48-4L-LED fixture including optional higher power fluorescent tubes. For special requirements or options not listed here contact us using the information below.\nSuggested Applications: Paint spray booths, Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Chemical manufacturing, Waste treatment plants, Gas processing plants.\n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eMade in USA Quality\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 280px;\"\u003e\n1. Each unit dialectically tested.\n2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets allow the light fixture to be rotated while on the cart through a wide degree of positions for optimal light placement.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. Over-sized, finned ballast housing for 800 mA fixtures provides more heat dissipation and extends ballast life. Larger ballast box accommodates High Output lamp ballasts. Ballast housing easily accessible and externally mounted. Top and bottom covers secured with nuts and bolts, instead of threaded through holes, which can be damaged with dirt.\n5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.\n6. A wrench is used to unscrew the end caps for relamping the fixture, while other models require the “tap and knock off” method to loosen the end cap.\n7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp protection.\n8. Spring loaded sockets on both ends hold lamps firmly for maximum shock and vibration protection.\n\u003c\/td\u003e\n\u003ctd\u003e\n1. 50,000 hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LEED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off – No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety\n\n\n\n\n\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264255971509,"sku":"PL3-EPLUC-48-4L-LED","price":11666.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPLUC-48-4L-LED.jpg?v=1628372513"},{"product_id":"pl3-epl-24-2l-led-visred","title":"Larson Explosion Proof Paint Spray Booth LED Lighting - Visible\/Red Combination - 2ft 2-Lamp - C1D1","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003eMade in the USA\r\u003cbr\u003eThe Larson Electronics EPL-24-2L-LED-VISRED Explosion Proof LED Light Fixture with Visible and Blackout lamps is NRTL Listed for United States and Canada Class 1 Division 1 \u0026amp; 2 and Class 2 Division 1 and 2 for areas where flammable chemical\/petrochemical vapors exist or have the potential to exist. This explosion proof LED light has a T6 temperature rating and carries a paint spray booth light certification, making it ideal for applications such as paint booths, oil rigs, offshore applications, petrochemical, manufacturing, chemical storage, water treatment centers, and food processing plants.\r\u003cbr\u003eThis two foot, two lamp LED fixture is ideal for operators seeking a top quality explosion proof light that will reduce operating costs, improve lighting quality and reduce downtime incurred from frequent servicing intervals. The EPL-24-2L-LED-VISRED is equipped with Larson Electronics’ specially designed LED T-series bulbs, with one visible white LED lamp and one blackout red LED lamp. Each lamp has individual leads to be powered separately. Our LED-T series bulbs are visibly brighter than standard F17\/T8`s and have consistently surprised many of our customers with their unexpectedly high light output levels.\r\u003cbr\u003eThis fixture carries a T6 temperature rating and is approved for Class I Division 1, Groups C and D, Class I, Division 2, Group A, B, C and D, and Class II, Division 1 and 2, Groups E, F and G environments where flammable or combustible gases, vapors, dusts, fibers, and flying exist or stand the potential to exist. This LED linear fixture is approved for use in confined spaces.\r\r\u003cbr\u003eWe have eliminated the ballast box normally associated with explosion proof fluorescent fixtures which reduces overall weight and overall complexity of installation. There is no ballast in this unit and the included\r\u003cbr\u003eLEDT8-24-V1\r\u003cbr\u003eLED lamps have a 50,000+ hour service life, both of which result in extreme efficiency and greatly reduced maintenance costs. These fluorescent LED lamps have internal drivers, eliminating external power components. The solid state design of the LED lamps give this fixture superior resistance to damage from vibration, extremes in temperature and a lamp service life over twice that of standard fluorescent bulbs. This second generation lamp is offered in 5600K cool white for the visible lamp and 600-675nm wavelength red for the blackout lamp\r\u003cbr\u003e.\r\u003cbr\u003eUnlike the glass tube design of traditional fluorescent lamps, these LED T-Style lamps have no filaments or fragile housings to break during operation. Instead of using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. The LED assembly is mounted to the \"tube\" constructed from extruded aluminum, with a polycarbonate lens protecting the LEDs. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than fluorescent lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional fluorescent lighting.\r\u003cbr\u003eThe 14 watt LED lamps produce 30% more illumination than standard T8 bulbs while offering lower amp draw and increased reliability. The visible white lamp produces 1,750 lumens at 125 lumens per watt. An EPL-24-2L-T8 explosion proof fluorescent light, with a combined total of 34 watts, draws 0.29 amps at 120 volts AC. This LED version of the same light, with a total of 28 watts, draws only 0.23 amps at 120 volts AC. The EPL-48-2L-LED is universal voltage, not multi-tap, and operates on any voltage from 120V to 277V AC 50\/60hz without any modifications. We also make a 12\/24V AC\/DC version for low voltage applications for AC or DC power.\r\u003cbr\u003eEnergy Consumption Comparison\r\u003cbr\u003eT5HO\r\u003cbr\u003eT8\r\u003cbr\u003eLED\r\u003cbr\u003eWattage\r\u003cbr\u003e48 watts\r\u003cbr\u003e34 watts\r\u003cbr\u003e28 watts\r\u003cbr\u003eAmp Draw @ 120V AC\r\u003cbr\u003e0.40 amps\r\u003cbr\u003e0.29 amps\r\u003cbr\u003e0.23 amps\r\u003cbr\u003eAmp Draw @ 220V AC\r\u003cbr\u003e0.22 amps\r\u003cbr\u003e0.16 amps\r\u003cbr\u003e0.13 amps\r\u003cbr\u003eAmp Draw @ 240V AC\r\u003cbr\u003e0.20 amps\r\u003cbr\u003e0.14 amps\r\u003cbr\u003e0.12 amps\r\u003cbr\u003eAmp Draw @ 277V AC\r\u003cbr\u003e0.18 amps\r\u003cbr\u003e0.13 amps\r\u003cbr\u003e0.10 amps\r\u003cbr\u003eAmp Draw @ 12V DC\r\u003cbr\u003e4 amps\r\u003cbr\u003e2.84 amps\r\u003cbr\u003e2.34 amps\r\u003cbr\u003eAmp Draw @ 24V DC\r\u003cbr\u003e2 amps\r\u003cbr\u003e1.42 amps\r\u003cbr\u003e1\r\u003cbr\u003e.17 amps\r\u003cbr\u003eLamp Life Expectancy\r\u003cbr\u003e20,000 hours\r\u003cbr\u003e24,000 hours\r\u003cbr\u003e50,000 hours\r\u003cbr\u003eOperation cost per year\r\u003cbr\u003e$25.23\r\u003cbr\u003e$14.87\r\u003cbr\u003e$14.72\r\u003cbr\u003eOur EPL-24-2L-LED-VISRED LED light fixture is NRTL Listed for United States and Canada approved for use in paint spray booths. Please note, according to the NEC, using threaded rigid pipe does not require additional seal offs with this fixture. An EYM and seal off is necessary for flex conduit or other non-rigid pipe implementations.\r\u003cbr\u003eMounting Options:\r\u003cbr\u003eSurface Mount (Standard)\r\u003cbr\u003eAdjustable Surface Mount Brackets:\r\u003cbr\u003eEach bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg.\r\u003cbr\u003ePendant Mount (Optional)\r\u003cbr\u003e3 Conduit Positions\r\u003cbr\u003e\u003cstrong\u003eSuspension Mounting:\u003c\/strong\u003e\r\u003cbr\u003ePendant mount fixtures hang from the ceiling and are suspended by rigid pipe. Each fixture features a 1\/2” NPT junction box on one end, and a 1\/2” NPT adjustable L-bracket on the other end of the fixture. Operators bring rigid pipe down to the threaded mounting hubs. Wiring is fed down through the rigid pipe to the junction box and tied in to the fixture’s lead wires, completing the electrical connection. The adjustable L-shape mounting bracket provides support for the opposite end of the fixture.\r\u003cbr\u003e\u003cstrong\u003eSuggested \u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/strong\u003e\r\u003cbr\u003eMade in USA Quality\r\u003cbr\u003eSuperior LED Benefits\r\u003cbr\u003e1. Each unit dialectically tested.\r\u003cbr\u003e1. 50,000 hour lifespan.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eNRTL Listed for United States \u0026amp; Canada\u003cbr\u003eUnited States \u0026amp; Canada NRTL Listed for \u003cbr\u003eDimensions: 11.25\"-W x 27.5\"-L x 8.5\"-H\u003cbr\u003eWeight: 32 Lbs. \u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e  Universal 120-277VAC 50\/60 Hz or 11-25V AC\/DC\u003cbr\u003eTotal Watts: 28 watts \u003cbr\u003eTotal Lumens: 1,750 (white)\u003cbr\u003eLED Lamp Life Expectancy:  50,000+ Hours\u003cbr\u003eLuminous Efficiency:  125 Lumens per Watt (white)\u003cbr\u003eColor Temp:  5600K and 600-675Nm Red\u003cbr\u003eColor Rendering Index:  \u0026gt;80\u003cbr\u003eBeam Angle:  150°\u003cbr\u003ePower Efficiency:  90%\u003cbr\u003ePower Factor:  \u0026gt;0.95\u003cbr\u003eAmbient Operating Temp Range: -30° C to +85°C\u003cbr\u003eOperating Temp Rating:  T6 Rated\u003cbr\u003eMinimum Operating Temp:  -30°C\u003cbr\u003eMaximum Case Temp:  +90°C\u003cbr\u003eHousing Material:  Cast Aluminum End Caps, Aluminum Reflectors - Copper Free\u003cbr\u003eLens Material:  Hardened Borosilicate Glass Tubes\u003cbr\u003eGasket Material:  Buna Rubber O-Rings\u003cbr\u003eMounting:  Surface Standard - Pendant Optional\u003cbr\u003eWiring Hub:  1\/2\" NPT\u003cbr\u003eWarranty:  5 Years*\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38264256004277,"sku":"PL3-EPL-24-2L-LED-VISRED","price":2864.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-24-2L-LED-VISRED-1.jpg?v=1610917601"},{"product_id":"pl3-hald-48-6l-led-nl","title":"Hazardous Area LED Light Fixture - 6 Lamp - C1D2 - Paint Spray Booth Rated - NO LAMPS","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eHALD-48-6L-LED-NL LED Paint Booth Fixture\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eApprovals\/Ratings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: NO LAMPS\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass I Division 2, Groups A, B, C \u0026amp; D \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixture Dimensions: 19.50\"W x 50.00\"L x 2.25\"D\u003c\/td\u003e\n\u003ctd\u003eClass II Division 2 Groups F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlange Dimensions: 23.00\"W x 51.875\"L (Extends 0.375\" into Spray Booth)\u003c\/td\u003e\n\u003ctd\u003eIP20 Ingress Protection Rating \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInset Dimensions: 19.50\"W x 50.00\"L\u003c\/td\u003e\n\u003ctd\u003eETL Listed U.S. and Canada \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Hole Size: 20.75\"W x 50.875\"L\u003c\/td\u003e\n\u003ctd\u003eNRTL Certified to UL-1993\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutoff Switch: 10 Watts @ 300 V AC (Max) Momentary Contact Switch\u003c\/td\u003e\n\u003ctd\u003eNRTL Certified to UL-1993 CLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Wattage: 180W Total (30W per lamp)\u003c\/td\u003e\n\u003ctd\u003eNRTL Certified to CAN\/CSA C22.2 No 1993\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 100-277 Volts AC, 50\/60Hz or 11-25 Volts AC\/DC\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life Expectancy: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWeight: 45 lb\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eColor Temperature: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eColor Rendering Index: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eBeam Angle: 150°\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003eSpecial Orders - Requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003ePower Efficiency: 90%\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003ePower Factor: \u0026gt;0.95\u003c\/td\u003e\n\u003ctd\u003eToll Free: 1-800-369-6671\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eAmbient Temperature Rating: -40°C to +65°C\u003c\/td\u003e\n\u003ctd\u003eIntl: 1-214-616-6180\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting: Recessed Panel Mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWiring Hub: 1\/2\" Threaded NPT Hub\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA\nThe HALD-48-6L-LED-NL from Larson Electronics is a Hazardous Area LED Light Fixture that is designed to provide a thin fixture profile that allows the maximum use of available space. This LED fixture is U.S.\/Canada approved Class I Division 2, Groups A, B, C and D - Class II Division 2, Groups F and G and designed for paint spray booths and locations where flammable chemical\/petrochemical vapors are present. The HALD-48-6L-LED-NL is offered in 100-277 Volts AC, 50\/60 Hz or 11-25 Volts AC\/DC voltage configurations and has a max wattage rating of 180W or 30W per lamp. The HALD-48-6L-LED-NL is designed to accept LED lamps. THIS FIXTURE IS NOT APPROPRIATE FOR SURFACE MOUNT APPLICATIONS.\n*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS LIGHTING SYSTEM*\nThe HALD-48-6L-LED-NL Explosion Proof fixture is a 4 foot long, 6 lamp, Class I Division 2 hazardous area LED light and ideal for use in paint spray booths and hazardous locations where space for lighting fixtures is limited. This fixture is IP20 ingress protection rated, is designed to be equipped with LED lamps and features an integrated momentary paint spray system cutoff switch that is activated when this fixture's lamp door is opened. Installed lamps are protected by a steel framed, hinged, 3\/16\" thick glass door that provides direct front access to the two lamps.\nPLEASE NOTE: The HALD-48-6L-LED-NL light fixture is sold without lamps and is not equipped with a ballast.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge \u003c\/td\u003e\n \u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nThe lamp housing is only 2 and 1\/4 inches thick, designed for recessed mounting, constructed of 20 Gauge steel and coated with a baked on white enamel finish. This fixture is multi-voltage capable and is approved for use paint spray booths. The HALD-48-6L-LED-NL provides operators in hazardous locations with a reliable and durable, low profile lighting solution that provides added safety through the inclusion of an integral paint spray cutoff switch that shuts down paint spray systems when the fixture is opened.\nWe have eliminated the ballast normally associated with fluorescent fixtures which reduces overall weight and creates a slimmer unit profile. There is no ballast in this unit and is designed to be used with LED lamps, both of which result in extreme efficiency and greatly reduced maintenance costs. The solid state design of LED lamps give this fixture superior resistance to damage from vibration, extremes in temperature, and a lamp service life over twice that of standard fluorescent bulbs.\nNOTE: The integral magnetic cutoff switch included with this fixture is activated when the lamp door is opened. This switch is not intended to directly control light operation and requires the addition of a separate solid state relay which is then used to control actual system operation. The Cutoff Switch acts only as an activator for an external relay and is rated for 10 watts at a maximum of 300V AC. Overloading the switch through improper connection will result in switch failure. It is recommended that a certified electrician make any installations and reviews of relay connections intended to take advantage of this light`s cutoff switch. The HALD-48-6L-LED-NL is offered in 100-277 Volts AC, 50\/60Hz or 11-25 Volts AC\/DC models.\nMounting: This fixture is designed for recessed mounting and requires a mounting hole to be made in booth panels capable of accomodating the fixture housing in order to provide the maximum amount of space in paint spray booth enclosures. Once mounted, this ftixture`s glass door frame will extend 3\/8\" into the spray booth.\nApplications: Paint spray booths and enclosed spaces where flammable chemical\/petrochemical vapors are present.\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264257052853,"sku":"PL3-HALD-48-6L-LED-NL","price":2628.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-HALD-48-6L-LED-NL.jpg?v=1629080185"},{"product_id":"pl3-hald-48-6l-t5ho","title":"Low Profile, Explosion Proof Light - 4ft, 6 Lamp - Class 1 Div. 2 - Paint Spray Booth Rated - T5HO","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eHALD-48-6L-T5HO Paint Booth Fixture\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eE.T.L Ratings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eUL Listing: United States - Canada\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass 1 Division 2, Groups A, B, C, D \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: W-20 3\/4” L-50 7.8\" D-2 1\/4\"\u003c\/td\u003e\n\u003ctd\u003eClass 2 Division 2 Groups F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnetic Switch: 10 watts@300 VAC Max \u003c\/td\u003e\n\u003ctd\u003eT3C (160 degree C) \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 324 watts\u003c\/td\u003e\n\u003ctd\u003eETL listed U.S. and Canada \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: Multi- 120-277 Volts 50\/60 Hz\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens:  30,000\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life Expectancy:  20,000 Hours\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficiency:  92 Lumens per Watt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp Range: T3C Rated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eBeam Angle: N\/A\u003c\/td\u003e\n\u003ctd\u003eToll Free: 1-800-369-6671\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eColor Temp: 5000- F54-T5\/850\/HO Bulbs \u003c\/td\u003e\n\u003ctd\u003eIntl: 1-214-616-6180\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting: Recessed Panel Mounting\u003c\/td\u003e\n\u003ctd\u003eFax: 1-903-498-3364\n \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWiring Hub: 1\/2 inch threaded NPT\u003c\/td\u003e\n\u003ctd\u003eE-mail: \n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA\nThe Larson Electronics HALD-48-6L-T5HO Hazardous Area Fluorescent Light Fixture is designed to provide a thin fixture profile that allows the maximum use of available space. This fluorescent fixture is U.S.\/Canada approved Class 1 Division 2, Groups A, B, C and D - Class 2 Division 2, Groups F and G and designed for paint spray booths and locations where flammable chemical\/petrochemical vapors are present. THIS FIXTURE IS NOT APPROPRIATE FOR SURFACE MOUNT APPLICATIONS.\n***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS LIGHTING SYSTEM*** \n\nThe HALD-48-6L-T5HO Explosion Proof fixture is a 4 foot long, 6 lamp, Class 1 Division 2 hazardous area fluorescent light and ideal for use in paint spray booths and hazardous locations where space for lighting fixtures is limited. This fixture is T3C temperature rated, comes standard with F54-T5\/850\/HO bulbs and features an integrated magnetic paint spray system cutoff switch that is activated when this fixture`s lamp door is opened. The lamps are protected by a steel framed, hinged, 3\/16\" thick glass door that provides direct front access to the two lamps. \n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nThe lamp housing is only 2 and 1\/4 inches thick, designed for recessed mounting, constructed of 20 Gauge steel and coated with a baked on white enamel finish. This fixture is multi-voltage capable and is approved for use paint spray booths. The HALD-48-6L provides operators in hazardous locations with a reliable and durable, low profile lighting solution that provides added safety through the inclusion of an integral paint spray cutoff switch that shuts down paint spray systems when the fixture is opened. \nNOTE: The integral magnetic cutoff switch included with this fixture is activated when the lamp door is opened. This switch is not intended to directly control light operation and requires the addition of a separate solid state relay which is then used to control actual system operation. The Cutoff Switch acts only as an activator for an external relay and is rated for 10 watts at a maximum of 300 VAC. Overloading the switch through improper connection will result in switch failure. It is recommened that a certified electrician make any installations and reviews of relay connections intended to take advantage of this light`s cutoff switch. The HALD-48-6L-T5HO has an electronic multi-voltage ballast and works with 120 Volt 60 HZ, 220 Volt 50 HZ, 240 Volt 60 HZ and 277 Volts 60 HZ. \nMounting: This fixture is designed for recessed mounting and requires a mounting hole to be made in booth panels capable of accomodating the fixture housing in order to provide the maximum amount of space in paint spray booth enclosures. Once mounted, this ftixture`s glass door frame will extend 3\/8” into the spray booth.\nApplications: Paint spray booths and enclosed spaces where flammable chemical\/petrochemical vapors are present. \n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eMade in USA Quality\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eLamp Options\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 167px;\"\u003e\n1. Each unit dialectically tested.\n2. Fixture arrives assembled and lamped to reduce installation time and cost. \n3. Fixture constructed of 20 gauge steel with a baked on white enamel finish.\n4. Relamping done via fixed hinge, drop open door.\n5. Reflectors coated with high gloss reflective enamel finish. \n6. 1\/2 NPT conduit hub for wiring. \n7. Integrally mounted magentic cutoff switch for connection to relay system allows automatic shutoff of paint system when fixture door is opened.\n8. Low profile fixture housing is only 2 1\/4\" thick, providing the maximum amount of room in space limited spray booth enclosures.                         \n\n\u003c\/td\u003e\n\u003ctd\u003e\nF54-T5\/850\/HO – 54 watt, 5000 lumens per bulb, 20,000 hours life, 5000 Kelvin color\n\n\n\n\n\n\n\n\n\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264257740981,"sku":"PL3-HALD-48-6L-T5HO","price":2820.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-HALD-48-6L-T5HO.jpg?v=1629080262"},{"product_id":"pl3-hald-48-4l-led","title":"Low Profile, Explosion Proof LED Light - 4ft, 4 Lamps - Class 1 Divison 2 - Paint Spray Booth Rated","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eHALD-48-4L-LED - Paint Spray Booth LED 4-Lamp Fixture\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eListing: United States - Canada\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass 1 Division 2, Groups A, B, C, D \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: W-15 3\/4” L-50 7\/8\" D-2 1\/4\"\u003c\/td\u003e\n\u003ctd\u003eClass 2 Division 2 Groups F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 40 Lbs\u003c\/td\u003e\n\u003ctd\u003eT3C (160°C) \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: Universal 120-277VAC 50\/60 Hz or 11-25V AC\/DC\u003c\/td\u003e\n\u003ctd\u003eListed for U.S. and Canada \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 112 watts \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 14,000\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Lamp Life Expectancy: 50,000+ Hours\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficiency: 125 Lumens per Watt\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 5600K, 4500K, 3000K\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eColor Rendering Index: \u0026gt;80\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eBeam Angle: 150°\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eCutoff Switch: 10 watts at 300V AC (Max) Momentary Contact Switch\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003ePower Efficiency: 90%\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003ePower Factor: \u0026gt;0.95\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eAmbient Operating Temp Range:-30° C to +85°C\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eOperating Temp Rating: T3C Rated\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMinimum Operating Temp: -30°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMaximum Case Temp: +90°C\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eHousing Material: 20ga Steel Frame\u003c\/td\u003e\n\u003ctd\u003eToll Free: 1-800-369-6671\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLens Material: 3\/16\" Tempered Glass\u003c\/td\u003e\n\u003ctd\u003eIntl: 1-214-616-6180\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting: Recessed Panel Mounting\u003c\/td\u003e\n\u003ctd\u003eFax: 1-903-498-3364\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWiring Hub: 1\/2\" Threaded NPT\u003c\/td\u003e\n\u003ctd\u003eE-mail: \n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA\nThe Larson Electronics HALD-48-4L-LED Hazardous Area LED Light Fixture is designed to provide a thin fixture profile that allows the maximum use of available space. This LED fixture is U.S.\/Canada approved Class 1 Division 2, Groups A, B, C and D - Class 2 Division 2, Groups F and G and designed for paint spray booths and locations where flammable chemical\/petrochemical vapors are present. \n***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS LIGHTING SYSTEM*** \nThe HALD-48-4L-LED Explosion Proof fixture is a 4 foot long, 4 lamp, Class 1 Division 2 hazardous area led light and ideal for use in paint spray booths and hazardous locations where space for lighting fixtures is limited. This fixture is T3C temperature rated, comes standard with high output LED bulbs, and features an integrated momentary paint spray system cutoff switch that is activated when this fixture`s lamp door is opened. The lamps are protected by a steel framed, hinged, 3\/16\" thick glass door that provides direct front access to the four lamps. The lamp housing is only 2 and 1\/4 inches thick, designed for recessed mounting, constructed of 20 Gauge steel and coated with a baked on white enamel finish.\nThis fixture is multi-voltage capable and is approved for use paint spray booths. The HALD-48-4L-LED provides operators in hazardous locations with a reliable and durable, low profile lighting solution that provides added safety through the inclusion of an integral paint spray cutoff switch that shuts down paint spray systems when the fixture is opened.\nWe have eliminated the ballast box normally associated with explosion proof fluorescent fixtures which reduces overall weight and overall complexity of installation. There is no ballast in this unit and the included  LED lamps have a 50,000+ hour service life, both of which result in extreme efficiency and greatly reduced maintenance costs. These fluorescent LED lamps have internal drivers, eliminating external power components. The solid state design of the LED lamps give this fixture superior resistance to damage from vibration, extremes in temperature and a lamp service life over twice that of standard fluorescent bulbs. This second generation lamp is offered in 5600K cool white, 4500K natural white, and 3000K warm white. Our standard unit ships with 5600K unless different color temperature is specified. \nUnlike the glass tube design of traditional fluorescent lamps, these LED T-Style lamps have no filaments or fragile housings to break during operation. Instead of using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. The LED assembly is mounted to the \"tube\" constructed from extruded aluminum, with a polycarbonate lens protecting the LEDs. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than fluorescent lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional fluorescent lighting. \nNOTE: The integral momentary cutoff switch included with this fixture is activated when the lamp door is opened. This switch is not intended to directly control light operation and requires the addition of a separate solid state relay which is then used to control actual system operation. The Cutoff Switch acts only as an activator for an external relay and is rated for 10 watts at a maximum of 300 VAC. Overloading the switch through improper connection will result in switch failure. It is recommenced that a certified electrician make any installations and reviews of relay connections intended to take advantage of this light`s cutoff switch. This fixture is universal voltage, not multi-tap, and operates on any voltage from 120V to 277V AC 50\/60hz without any modifications. We also make a 12\/24V AC\/DC version for low voltage applications for AC or DC power. \n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr align=\"center\"\u003e\n\u003ctd\u003eEnergy Consumption Comparison\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eT5HO\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eT8\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eWattage\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e216 watts\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e128 watts\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e112 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 120V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.80 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.07 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.93 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 220V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.98 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.59 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.51 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 240V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.90 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.54 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.47 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 277V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.78 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.47 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.40 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 12V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e18 amps\u003c\/td\u003e\n \u003ctd style=\"width: 117px; text-align: center;\"\u003e10.67 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e9.33 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 24V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e9 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e5.34 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e4.67 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eLamp Life Expectancy\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e20,000 hours\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e24,000 hours \u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e50,000 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eOperation cost per year\n(12hs\/day @ 12c\/kWh)\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$113.53\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$67.28\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$58.86\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nMounting: This fixture is designed for recessed mounting and requires a mounting hole to be made in booth panels capable of accommodating the fixture housing in order to provide the maximum amount of space in paint spray booth enclosures. Once mounted, this fixture`s glass door frame will extend 3\/8” into the spray booth.\nApplications: Paint spray booths and enclosed spaces where flammable chemical\/petrochemical vapors are present. \n\n\u003ctable width=\"100%\" cellpadding=\"2\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eMade in USA Quality\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 167px;\"\u003e\n1. Each unit dialectically tested.\n2. Fixture arrives assembled and lamped to reduce installation time and cost. \n3. Fixture constructed of 20 gauge steel with a baked on white enamel finish.\n4. Relamping done via fixed hinge, drop open door.\n5. Reflectors coated with high gloss reflective enamel finish. \n6. 1\/2 NPT conduit hub for wiring. \n7. Integrally mounted momentary cutoff switch for connection to relay system allows automatic shutoff of paint system when fixture door is opened.\n8. Low profile fixture housing is only 2 1\/4\" thick, providing the maximum amount of room in space limited spray booth enclosures.\n\u003c\/td\u003e\n\u003ctd\u003e\n1. 50,000 hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LEED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off – No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264257773749,"sku":"PL3-HALD-48-4L-LED","price":3068.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-HALD-48-4L-LED.jpg?v=1629080251"},{"product_id":"pl3-hald-48-2l-led","title":"Low Profile LED Explosion Proof Light - 4ft. 2 lamp - Class I, Div. II - Paint Spray Booth Rated - 1X4 Lay-In Mounting","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eHALD-48-2L-LED LED Paint Booth Lay-In Fixture\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eApprovals\/Ratings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: T8-Style LED Tubes\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass I Division 2, Groups A, B, C, D \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 10.75\"W x 50.875\"L x 2.25\"D\u003c\/td\u003e\n\u003ctd\u003eClass II Division 2 Groups F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutoff Switch: 10 Watts at 300 V AC (Max) Momentary Contact Switch \u003c\/td\u003e\n\u003ctd\u003eIP20 Ingress Protection Rating \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 36 Watts\u003c\/td\u003e\n\u003ctd\u003eETL listed U.S. and Canada \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 100-277 Volts AC, 50\/60 Hz or 11-25 Volts AC\/DC\u003c\/td\u003e\n\u003ctd\u003eNRTL Certified to UL-1993\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 7,000\u003c\/td\u003e\n\u003ctd\u003eNRTL Certified to UL-1993 CLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life Expectancy: 50,000 Hours\u003c\/td\u003e\n\u003ctd\u003eNRTL Certified to CAN\/CSA C22.2 No 1993\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 125 Lm\/W\u003c\/td\u003e\n\u003ctd\u003eLEL Listed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWeight: 40 lb\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eColor Temperature: 3000K, 4500K, or 5600K\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eColor Rendering Index: 85+\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eBeam Angle: 150°\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003eSpecial Orders - Requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003ePower Efficiency: 90%\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003ePower Factor: \u0026gt;0.95\u003c\/td\u003e\n\u003ctd\u003eToll Free: 1-800-369-6671\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eAmbient Temperature Rating: -40°C to +65°C\u003c\/td\u003e\n\u003ctd\u003eIntl: 1-214-616-6180\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting: Recessed 1X4 Lay-In Panel Mounting\u003c\/td\u003e\n\u003ctd\u003eFax: 1-903-498-3364\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWiring Hub: 1\/2\" Threaded NPT Hub\u003c\/td\u003e\n\u003ctd\u003eE-mail: \n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA\nThe HALD-48-2L-LED from Larson Electronics is a Hazardous Area LED Light Fixture that is designed to provide a thin fixture profile that allows the maximum use of available space. This fluorescent fixture is U.S.\/Canada approved Class I Division 2, Groups A, B, C and D - Class II Division 2, Groups F and G and designed for paint spray booths and locations where flammable chemical\/petrochemical vapors are present. The HALD-48-2L-LED is offered in 100-277 Volts AC, 50\/60 Hz or 11-25 Volts AC\/DC voltage configurations and draws a total of 56 watts while producing a total of 7,000 lumens. The HALD-48-2L-LED is designed for 1X4 lay-in mounting. \n***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS LIGHTING SYSTEM*** \nThe HALD-48-2L-LED Explosion Proof fixture is a 4 foot long, 2 lamp, Class I Division 2 hazardous area LED light and ideal for use in paint spray booths and hazardous locations where space for lighting fixtures is limited. This fixture is IP20 ingress protection rated, comes standard with LEDT8-28W-V1 LED bulbs and features an integrated momentary paint spray system cutoff switch that is activated when this fixture's lamp door is opened. The lamps are protected by a steel framed, hinged, 3\/16\" thick glass door that provides direct front access to the four lamps. The lamp housing is only 2 and 1\/4 inches thick, designed for recessed 1X4 lay-in mounting, constructed of 20 Gauge steel and coated with a baked on white enamel finish.\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\nThis fixture is multi-voltage capable and is approved for use paint spray booths. The HALD-48-2L-LED provides operators in hazardous locations with a reliable and durable, low profile lighting solution that provides added safety through the inclusion of an integral paint spray cutoff switch that shuts down paint spray systems when the fixture is opened.\nNOTE: The integral momentary cutoff switch included with this fixture is activated when the lamp door is opened. This switch is not intended to directly control light operation and requires the addition of a separate solid state relay which is then used to control actual system operation. The Cutoff Switch acts only as an activator for an external relay and is rated for 10 watts at a maximum of 300 V AC. Overloading the switch through improper connection will result in switch failure. It is recommended that a certified electrician make any installations and reviews of relay connections intended to take advantage of this light's cutoff switch. This fixture is universal voltage, not multi-tap, and operates on any voltage from 120 V to 277 V AC, 50\/60 Hz without any modifications. We also make a 12-24 V AC\/DC version for low voltage applications for AC to DC power.\nMounting: This fixture is designed for recessed 1X4 lay-in mounting and requires a mounting hole to be made in booth panels capable of accomodating the fixture housing in order to provide the maximum amount of space in paint spray booth enclosures. Once mounted, this fixture's glass door frame will extend 3\/8\" into the spray booth.\nApplications: Paint spray booths and enclosed spaces where flammable chemical\/petrochemical vapors are present.\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264257806517,"sku":"PL3-HALD-48-2L-LED","price":2262.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-HALD-48-2L-LED.jpg?v=1629080255"},{"product_id":"pl3-hald-48-2l-led-nl","title":"Low Profile LED Explosion Proof Light - 4' - 2 lamp - C1D2 - Paint Spray Booth Rated - 1X4 Lay-In Mounting - NO LAMPS","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eHALD-48-2L-LED-NL LED Paint Booth Lay-In Fixture\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eApprovals\/Ratings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: NO LAMPS\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass I Division 2, Groups A, B, C, D \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 10.75\"W x 50.875\"L x 2.25\"D\u003c\/td\u003e\n\u003ctd\u003eClass II Division 2 Groups F, G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutoff Switch: 10 Watts at 300 V AC (Max) Momentary Contact Switch\u003c\/td\u003e\n\u003ctd\u003eIP20 Ingress Protection Rating \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Wattage: 60W Total (30W per lamp)\u003c\/td\u003e\n\u003ctd\u003eETL listed U.S. and Canada \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 100-277 Volts AC, 50\/60 Hz or 11-25 Volts AC\/DC\u003c\/td\u003e\n\u003ctd\u003eNRTL Certified to UL-1993\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: -\u003c\/td\u003e\n\u003ctd\u003eNRTL Certified to UL-1993 CLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life Expectancy: -\u003c\/td\u003e\n\u003ctd\u003eNRTL Certified to CAN\/CSA C22.2 No 1993\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: -\u003c\/td\u003e\n\u003ctd\u003eLEL Listed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWeight: 40 lb\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eColor Temperature: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eColor Rendering Index: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eBeam Angle: 150°\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003eSpecial Orders - Requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003ePower Efficiency: 90%\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003ePower Factor: \u0026gt;0.95\u003c\/td\u003e\n\u003ctd\u003eToll Free: 1-800-369-6671\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eAmbient Temperature Rating: -40°C to +65°C\u003c\/td\u003e\n\u003ctd\u003eIntl: 1-214-616-6180\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting: Recessed 1X4 Lay-In Panel Mounting\u003c\/td\u003e\n\u003ctd\u003eFax: 1-903-498-3364\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWiring Hub: 1\/2\" Threaded NPT Hub\u003c\/td\u003e\n\u003ctd\u003eE-mail: \n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA\nThe HALD-48-2L-LED-NL from Larson Electronics is a Hazardous Area LED Light Fixture that is designed to provide a thin fixture profile that allows the maximum use of available space. This fluorescent fixture is U.S.\/Canada approved Class I Division 2, Groups A, B, C and D - Class II Division 2, Groups F and G and designed for paint spray booths and locations where flammable chemical\/petrochemical vapors are present. The HALD-48-2L-LED-NL is offered in 100-277 Volts AC, 50\/60Hz or 11-25 Volts AC\/DC voltage configurations and has a max wattage of 60W or 30W per lamp. The HALD-48-2L-LED-NL is designed to accept LED lamps and is designed for 1X4 lay-in mounting.\n*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS LIGHTING SYSTEM*\nThe HALD-48-2L-LED-NL Explosion Proof fixture is a 4 foot long, 2 lamp, Class I Division 2 hazardous area led light and ideal for use in paint spray booths and hazardous locations where space for lighting fixtures is limited. This fixture is IP20 ingress protection rated, is designed to be equipped with LED lamps and features an integrated momentary paint spray system cutoff switch that is activated when this fixture's lamp door is opened. The lamps are protected by a steel framed, hinged, 3\/16\" thick glass door that provides direct front access to the four lamps. The lamp housing is only 2 and 1\/4 inches thick, designed for recessed 1X4 lay-in mounting, constructed of 20 Gauge steel and coated with a baked on white enamel finish.\nPLEASE NOTE: The HALD-48-2L-LED-NL light fixture is sold without lamps and is not equipped with a ballast.\nThis fixture is multi-voltage capable and is approved for use paint spray booths. The HALD-48-2L-LED-NL provides operators in hazardous locations with a reliable and durable, low profile lighting solution that provides added safety through the inclusion of an integral paint spray cutoff switch that shuts down paint spray systems when the fixture is opened.\nWe have eliminated the ballast normally associated with fluorescent fixtures which reduces overall weight and creates a slimmer unit profile. There is no ballast in this unit and is designed to be used with LED lamps, both of which result in extreme efficiency and greatly reduced maintenance costs. The solid state design of LED lamps give this fixture superior resistance to damage from vibration, extremes in temperature, and a lamp service life over twice that of standard fluorescent bulbs.\nNOTE: The integral momentary cutoff switch included with this fixture is activated when the lamp door is opened. This switch is not intended to directly control light operation and requires the addition of a separate solid state relay which is then used to control actual system operation. The Cutoff Switch acts only as an activator for an external relay and is rated for 10 watts at a maximum of 300 V AC. Overloading the switch through improper connection will result in switch failure. It is recommended that a certified electrician make any installations and reviews of relay connections intended to take advantage of this light's cutoff switch. This fixture is universal voltage, not multi-tap, and operates on any voltage from 120V to 277 V AC, 50\/60 Hz without any modifications. We also make a 12\/24 V AC\/DC version for low voltage applications for AC to DC power. \nMounting: This fixture is designed for recessed 1X4 lay-in mounting and requires a mounting hole to be made in booth panels capable of accomodating the fixture housing in order to provide the maximum amount of space in paint spray booth enclosures. Once mounted, this ftixture's glass door frame will extend 3\/8\" into the spray booth.\nApplications: Paint spray booths and enclosed spaces where flammable chemical\/petrochemical vapors are present.\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264257839285,"sku":"PL3-HALD-48-2L-LED-NL","price":1886.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-HALD-48-2L-LED-NL.jpg?v=1629080240"},{"product_id":"pl3-hald-48-4l-led-nl","title":"Low Profile Explosion Proof LED Light - 4ft, 4 Lamp - C1D2 - Paint Spray Booth Rated - NO LAMPS","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eHALD-48-4L-LED-NL - Paint Spray Booth LED 4-Lamp Fixture\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eListing: United States - Canada\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass I Division 2, Groups A, B, C, D \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 50.875\"L x 15.75\"W x 2.25\"D\u003c\/td\u003e\n\u003ctd\u003eClass II Division 2 Groups F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 40 Lbs\u003c\/td\u003e\n\u003ctd\u003eT3C (160°C) \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: Universal 120-277VAC 50\/60 Hz or 11-25V AC\/DC\u003c\/td\u003e\n\u003ctd\u003eListed for U.S. and Canada \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Wattage: 120W Total (30W per lamp)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Lamp Life Expectancy: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficiency: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eColor Rendering Index: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eBeam Angle: 150°\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eCutoff Switch: 10 watts at 300V AC (Max) Momentary Contact Switch\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003ePower Efficiency: 90%\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003ePower Factor: \u0026gt;0.95\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eAmbient Operating Temp Range: -30°C to +85°C\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eOperating Temp Rating: T3C Rated\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMinimum Operating Temp: -30°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMaximum Case Temp: +90°C\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eHousing Material: 20ga Steel Frame\u003c\/td\u003e\n\u003ctd\u003eToll Free: 1-800-369-6671\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLens Material: 3\/16\" Tempered Glass\u003c\/td\u003e\n\u003ctd\u003eIntl: 1-214-616-6180\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting: Recessed Panel Mounting\u003c\/td\u003e \n\u003ctd\u003eFax: 1-903-498-3364\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWiring Hub: 1\/2\" Threaded NPT\u003c\/td\u003e\n\u003ctd\u003eE-mail: \n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA\nThe Larson Electronics HALD-48-4L-LED-NL Hazardous Area LED Light Fixture is designed to provide a thin fixture profile that allows the maximum use of available space. This LED fixture is U.S.\/Canada approved Class I Division 2, Groups A, B, C and D - Class II Division 2, Groups F and G and designed for paint spray booths and locations where flammable chemical\/petrochemical vapors are present. This light fixture is designed to accept LED bulbs.\n*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS LIGHTING SYSTEM*\nThe HALD-48-4L-LED-NL Explosion Proof fixture is a 4 foot long, 4-lamp, Class I Division 2 hazardous area led light that can accept 4 LED bulbs and is ideal for use in paint spray booths and hazardous locations where space for lighting fixtures is limited. This fixture is T3C temperature rated, is designed to be equipped with LED bulbs, and features an integrated momentary paint spray system cutoff switch that is activated when this fixture`s lamp door is opened. Installed lamps are protected by a steel framed, hinged, 3\/16\" thick glass door that provides direct front access to the four lamps. The lamp housing is only 2 and 1\/4 inches thick, designed for recessed mounting, constructed of 20 Gauge steel and coated with a baked on white enamel finish.\nPLEASE NOTE: The HALD-48-4L-LED-NL light fixture is sold without lamps and is not equipped with a ballast.\nThis fixture is multi-voltage capable and is approved for use paint spray booths. The HALD-48-4L-LED-NL provides operators in hazardous locations with a reliable and durable, low profile lighting solution that provides added safety through the inclusion of an integral paint spray cutoff switch that shuts down paint spray systems when the fixture is opened.\nWe have eliminated the ballast normally associated with fluorescent fixtures which reduces overall weight and creates a slimmer unit profile. There is no ballast in this unit and is designed to be used with LED lamps, both of which result in extreme efficiency and greatly reduced maintenance costs. The solid state design of the LED lamps give this fixture superior resistance to damage from vibration, extremes in temperature, and a lamp service life over twice that of standard fluorescent bulbs.\nNOTE: The integral momentary cutoff switch included with this fixture is activated when the lamp door is opened. This switch is not intended to directly control light operation and requires the addition of a separate solid state relay which is then used to control actual system operation. The Cutoff Switch acts only as an activator for an external relay and is rated for 10 watts at a maximum of 300 VAC. Overloading the switch through improper connection will result in switch failure. It is recommenced that a certified electrician make any installations and reviews of relay connections intended to take advantage of this light`s cutoff switch. This fixture is universal voltage, not multi-tap, and operates on any voltage from 120V to 277V AC 50\/60hz without any modifications. We also make a 12\/24V AC\/DC version for low voltage applications for AC or DC power. \nMounting: This fixture is designed for recessed mounting and requires a mounting hole to be made in booth panels capable of accommodating the fixture housing in order to provide the maximum amount of space in paint spray booth enclosures. Once mounted, this fixture`s glass door frame will extend 3\/8\" into the spray booth.\nApplications: Paint spray booths and enclosed spaces where flammable chemical\/petrochemical vapors are present.\n\n\u003ctable width=\"100%\" border=\"0\" cellpadding=\"2\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eMade in USA Quality\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 167px;\"\u003e\n1. Each unit dialectically tested.\n2. Fixture is designed to accept LED lamps but does NOT come with lamps. \n3. Fixture constructed of 20 gauge steel with a baked on white enamel finish.\n4. Relamping done via fixed hinge, drop open door.\n5. Reflectors coated with high gloss reflective enamel finish. \n6. 1\/2\" NPT conduit hub for wiring. \n7. Integrally mounted momentary cutoff switch for connection to relay system allows automatic shutoff of paint system when fixture door is opened.\n8. Low profile fixture housing is only 2 1\/4\" thick, providing the maximum amount of room in space limited spray booth enclosures.\n\u003c\/td\u003e\n\u003ctd\u003e\n1. 50,000 hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LEED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off - No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264257872053,"sku":"PL3-HALD-48-4L-LED-NL","price":2652.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-HALD-48-4L-LED-NL.jpg?v=1629080267"},{"product_id":"pl3-epluc-48-4l-led-g2","title":"Explosion Proof LED Light Upright Cart with Wheels - 2nd Gen - Paint Spray Booths - Aluminum Frame","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n \u003ctd style=\"width: 61%;\"\u003eEPLUC-48-4L-LED Explosion Proof\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eU.L. Ratings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eUL Listing: United States - Canada\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass 1 Division 1, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: W-24\"  L-58\"   H-25.5\"\u003c\/td\u003e\n\u003ctd\u003eClass 1 Division 2, Group A,B,C,D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Unit Weight: 180 Lbs \u003c\/td\u003e\n\u003ctd\u003eUL 595 Outdoor Marine Type (Saltwater)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 112 watts\u003c\/td\u003e\n\u003ctd\u003eUL 844, 924\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: Multi- 120V-60hz  220V-50hz  240V-60hz  277V-60hz: \u003c\/td\u003e\n\u003ctd\u003eUL 1598 Marine Type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens:  11,000\u003c\/td\u003e\n\u003ctd\u003eClass II Division 1- 2, Groups E,F,G \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life Expectancy:  50,000 Hours\u003c\/td\u003e\n\u003ctd\u003eUL Certified Canadian Standards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficiency: 98.21 Lumens per Watt\u003c\/td\u003e\n\u003ctd\u003eUL listed for Paint Spray Booths*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eOperating Temp Range: T6 Rated* -30 C to 85C \u003c\/td\u003e\n\u003ctd\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMinimum Operating Temp: -30 C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMaximum Case Temp: 90 C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eColor Temp: 5600K \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting: Portable Upright Cart with Adjustable Brackets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eU.L Approval:  \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 21px;\"\u003eWiring: 50ft SOOW Cord\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\r\n\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA\nThe EPLUC-48-4L-LED-G2 Upright Explosion Proof LED Light Cart is U.S.\/Canada UL Listed Class 1 Division 1, Class 2 Division 1 and offers exceptional lighting versatility and convenience with effective protection to operators working in hazardous locations. Solid rubber tires, uni-directional caster wheels, and a fold down handle gives this light excellent mobility and versatility and makes it an ideal choice for operators who need an effective and safe lighting solution that can be easily applied over a wide variety of applications. \n\nThe EPLUC-48-4L-LED-G2 aluminum upright explosion proof cart is UL listed Class 1 Division 1 and Class 2 Division 1 \u0026amp; 2 and offers the ability to quickly and easily add light wherever it is needed without the need for special considerations of hazardous conditions beyond adhering to the normal rules of ratings and classifications. This unit incorporates a pair of our highly effective Larson Electronics  equipped with four LED tube lamps into a mobile cart platform equipped with wheels. The EPLUC-48-4L-LED-G2 is equipped with our specially designed LED T-series bulbs which produce 30% more light than standard T8 bulbs. The platform is constructed of corrosion resistant aluminum alloy, has non sparking casters, and includes a Class 1 Div 1 explosion proof switch with 50 foot of SOOW electric cable and explosion proof plug as well. \n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 119px;\"\u003e\n\u003ctable height=\"140\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%; height: 113px;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 31%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 36%;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 21px;\"\u003eClick to Enlarge \u003c\/td\u003e\n\u003ctd\u003eClick to Enlarge \u003c\/td\u003e\n\u003ctd\u003eClick to Enlarge \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 119px;\"\u003e\n\u003ctable height=\"140\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%; height: 113px;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 31%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 36%;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 21px;\"\u003eClick to Enlarge \u003c\/td\u003e\n\u003ctd\u003eClick to Enlarge \u003c\/td\u003e\n\u003ctd\u003eClick to Enlarge \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 420px;\"\u003e\nThis upright explosion proof aluminum cart offers an excellent lighting solution for operators who need full power illumination in areas where traditional fixed mount lighting is obstructed or cannot effectively reach. The cart is highly versatile and gives the operator the ability to easily move the entire assembly around the work space simply by leaning the cart back and rolling it into position. Also included is a fold down handle and uni-directional caster wheels that allows operators to lay the unit flat and wheel it into hard to reach areas such as underneath vehicles in paint spray booths.\nWe have eliminated the ballast box normally associated with fluorescent fixtures which reduces overall weight, creates a slimmer unit profile, and helps this fixture maintain a T-6 temperature rating. There is no ballast in this unit and the included LED T-series lamps have a 50,000 hour service life, both of which result in extreme efficiency and greatly reduced maintenance costs. Maintenance is further simplified with interchangeable screw on end caps and O ring seals which allows all relamping to be done from one end of the fixture. \nThe light fixtures used in the EPLUC-48-4L-LED-G2 are T6 temperature rated and paint booth certified, and produce a combined total 11,000 lumens of light using four tube style LED bulbs. The lamps are protected by heat and impact resistant Pyrex tubes and heavy wire grates, and the fixtures are constructed of copper free aluminum alloy. The lamp reflectors are corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. Included with this cart is 50 feet of chemical and abrasion resistant cord, exlosion proof plug, and an explosion proof inline switch which allows operators to safely control light operation within the hazardous area without the need for inconvenient plugging and unplugging of the fixture.\n\nThis light cart is multi-voltage capable and can operate with voltages of 120V-60hz 220V-50hz 240V-60hz and 277V-60hz. We also offer a low voltage configuration for 12-24 Volts DC. The entire cart and fixture unit is UL Listed for use in paint spray booths and U.L. 1598 -U.L. 595 compliant for wet area and marine use. The cart allows the entire fixture to be easily wheeled into positions needed, and can be laid flat for sliding the cart under vehicles or into hard to reach areas.  \nNote: The light fixture used in this cart is compatible with the usual options associated with the EPLUC-48-4L-LED-G2 fixture including optional LED tube lamps and higher power fluorescent tubes. For special requirements or options not listed here contact us using the information below. \nSuggested Applications: Paint spray booths, Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Chemical manufacturing, Waste treatment plants, Gas processing plants.\n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eMade in USA Quality\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 280px;\"\u003e\n1. Each unit dialectically tested.\n2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets allow the light fixture to be rotated while on the cart through a wide degree of positions for optimal light placement.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. Over-sized, finned ballast housing for 800 mA fixtures provides more heat dissipation and extends ballast life. Larger ballast box accommodates High Output lamp ballasts. Ballast housing easily accessible and externally mounted. Top and bottom covers secured with nuts and bolts, instead of threaded through holes, which can be damaged with dirt.\n5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.\n6. A wrench is used to unscrew the end caps for relamping the fixture, while other models require the “tap and knock off” method to loosen the end cap.\n7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp protection.\n8. Spring loaded sockets on both ends hold lamps firmly for maximum shock and vibration protection.\n\u003c\/td\u003e\n\u003ctd\u003e\n1. 50,000 hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LEED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off – No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety\n\n\n\n\n\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264261673141,"sku":"PL3-EPLUC-48-4L-LED-G2","price":11868.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPLUC-48-4L-LED-G2.jpg?v=1628372516"},{"product_id":"pl3-epl-emg-24-2l-led-g2","title":"Larson Explosion Proof Emergency LED Light - Class 1, Class 2 Div 1 - Paint Spray Booth Cert - 2nd Gen LEDs","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003eMade in the USA\r\u003cbr\u003eThe Larson Electronics EPL-EMG-24-2L-LED-G2 Explosion Proof Emergency LED Light Fixture is NRTL Listed for United States and Canada Class 1 Division 1 \u0026amp; 2, Class II Division 1 \u0026amp; 2, has a T6 temperature rating and is a superior lighting solution for areas where flammable chemical\/petrochemical vapors or pulverized dust exist or have the potential to exist.\r\u003cbr\u003eThis 2 foot long, 2 LED tube, explosion proof light fixture is ideal for use in locations requiring powerful yet compact hazardous location lighting that will improve overall illumination levels and light quality while reducing operating costs.\r\u003cbr\u003eThe EPL-EMG-24-2L-LED-G2 is equipped with Larson Electronics’s specially designed LED T-series bulbs which produce 30% more illumination at 8 feet distance as compared to standard T8 lamps when measured with an Extech light meter. Our LED-T series bulbs are visibly brighter than standard T8s and have consistently surprised many of our customers with their unexpectedly high light output levels. This 2 LED bulb explosion proof fixture is lighter in weight, has a slimmer profile, and produces more light than traditional explosion proof fluorescent fixtures. The 2 foot long T17 LED tube design bulbs included with this unit are rated at 50,000+ hours of service life, which is nearly twice as long as standard T8 bulbs.\r\u003cbr\u003eWith an integrated emergency ballast, this explosion proof LED light will continue to illuminate one bulb at for 90 minutes at 1470 lumens once the main electrical power to the light is severed. Once standard electrical power is restored, the emergency battery pack will be recharged.\r\u003cbr\u003eThis fixture carries a T6 temperature rating and is Class 1 Division 1, Groups C and D, Class 1 Division 2, Group A,B,C and D, and Class II, Division 1 and 2, Groups E, F and G.\r\r\r\r\u003cbr\u003eThe solid state design of the LED lamps give this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T8 bulbs. The 15 watt LED lamps produce more illumination than standard T8 bulbs. The LED bulbs used in this fixture are our new second generation LED T series 15 watt T17 style lamps which produce 30% more light than standard T8 bulbs when measured from eight feet. This fixture is multi-voltage capable (not multi-tap) and works on the following voltages: 120 Volt 60 HZ, 220 Volt 50 HZ, 240 Volt 60 HZ, 277 Volts 60 HZ. We also make a 12-24V DC version for low voltage applications (-LV suffix). Our EPL-24-2L-LED LED light fixture is NRTL Listed for United States and Canada for use in paint spray booths.\r.\r\u003cbr\u003eAdditional mounting options:\r\u003cbr\u003eUnless otherwise specified, our standard, most popular configuration is the bracket end mounting shown above. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit).\r\u003cbr\u003eStandard Bracket Mounts:\r\u003cbr\u003eEach bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top of the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. The pictures shown above illustrate the side brackets. The third picture enlarged below also shows the brackets at the both ends of the light.\r\u003cbr\u003e\u003cstrong\u003eSuggested \u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/strong\u003e\r\u003cbr\u003ePaint spray booths, Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Gas processing plants, Chemical manufacturing, Waste treatment plants, Gas processing plants.\r\u003cbr\u003eMade in USA Quality\r\u003cbr\u003eSuperior LED Benefits\r\u003cbr\u003e1. Each unit dialectrically tested.\r\u003cbr\u003e1. 50,000 hour lifespan.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eNRTL Listed for United States \u0026amp; Canada\u003cbr\u003eUnited States \u0026amp; Canada NRTL Listed for \u003cbr\u003eLamp Type:  LED\u003cbr\u003eDimensions:  W-11.25\" L-27.5\" H-8.5 \"\u003cbr\u003eWeight:  32 Lbs \u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e  Universal 120\/277V 50\/60Hz\u003cbr\u003eLow Voltage (Optional):  12-24V DC\u003cbr\u003eTotal Watts: 30 watts \u003cbr\u003eTotal Lumens:  2,280\u003cbr\u003eLuminous Efficacy:  98 Lumens per Watt\u003cbr\u003eLED Lamp Life Expectancy:  50,000+ Hours\u003cbr\u003eColor Temp:  5300K \u003cbr\u003eColor Rendering Index:  \u0026gt;75 CRI\u003cbr\u003eBeam Angle:  150°\u003cbr\u003eLighting Configuration:  Flood Pattern\u003cbr\u003eAmbient Operating Temp Range: -30° C to 70° C\u003cbr\u003eOperating Temp Range: -30° C to 70° CT6 rated\u003cbr\u003eMounting:  Bracket Standard - Pendant Optional\u003cbr\u003eWiring Hub:  1\/2 inch threaded\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38264263868597,"sku":"PL3-EPL-EMG-24-2L-LED-G2","price":3416.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-EMG-24-2L-LED-G2-1.jpg?v=1610917952"},{"product_id":"pl3-epl-emg-24-2l-led","title":"Larson Explosion Proof Emergency LED Light - Class 1, Class 2 Div 1 - Paint Spray Booth Cert","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003eMade in the USA\r\u003cbr\u003eThe Larson Electronics EPL-EMG-24-2L-LED Explosion Proof Emergency LED Light Fixture is NRTL Listed for United States and Canada Class 1 Division 1 \u0026amp; 2, Class 2 Division 1 \u0026amp; 2, has a T6 temperature rating and is a superior lighting solution for areas where flammable chemical\/petrochemical vapors or pulverized dust exist or have the potential to exist.\r\u003cbr\u003eThis 2 foot long, 2 LED tube, explosion proof light fixture is ideal for use in locations requiring powerful yet compact hazardous location lighting that will improve overall illumination levels and light quality while reducing operating costs.\r\u003cbr\u003eThe EPL-EMG-24-2L-LED is equipped with specially designed LED T-series bulbs which produce 15% more illumination at 8 feet distance as compared to standard T8 lamps when measured with an Extech light meter. Our LED-T series bulbs are visibly brighter than standard T8s and have consistently surprised many of our customers with their unexpectedly high light output levels. This 2 LED bulb explosion proof fixture is lighter in weight, has a slimmer profile, and produces more light than traditional explosion proof fluorescent fixtures. The 2 foot long T17 LED tube design bulbs included with this unit are rated at 50,000+ hours of service life, which is nearly twice as long as standard T8 bulbs.\r\u003cbr\u003eWith an integrated emergency ballast, this explosion proof LED light will continue to illuminate one bulb at for 90 minutes at 1350 lumens once the main electrical power to the light is severed. Once standard electrical power is restored, the emergency battery pack will be recharged.\r\u003cbr\u003eThis fixture carries a T6 temperature rating and is Class 1 Division 1, Groups C and D, Class 1 Division 2, Group A,B,C and D, and Class II, Division 1 and 2, Groups E, F and G.\r\u003cbr\u003eThe solid state design of the LED lamps give this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T8 bulbs. The 15 watt LED lamps produce more illumination than standard T8 bulbs. The LED bulbs used in this fixture are our new second generation LED T series 15 watt T17 style lamps which produce 15% more light than standard T8 bulbs when measured from eight feet. This fixture is multi-voltage capable (not multi-tap) and works on the following voltages: 120 Volt 60 HZ, 220 Volt 50 HZ, 240 Volt 60 HZ, 277 Volts 60 HZ. We also make a 12-24V DC version for low voltage applications (-LV suffix). Our EPL-24-2L-LED LED light fixture is NRTL Listed for United States and Canada for use in paint spray booths.\r\u003cbr\u003eAdditional mounting options:\r\u003cbr\u003eUnless otherwise specified, our standard, most popular configuration is the bracket end mounting shown above. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit).\r\u003cbr\u003eStandard Bracket Mounts:\r\u003cbr\u003eEach bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top of the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. The pictures shown above illustrate the side brackets. The third picture enlarged below also shows the brackets at the both ends of the light.\r\u003cbr\u003e\u003cstrong\u003eSuggested \u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/strong\u003e\r\u003cbr\u003ePaint spray booths, Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Gas processing plants, Chemical manufacturing, Waste treatment plants, Gas processing plants.\r\u003cbr\u003eMade in USA Quality\r\u003cbr\u003eSuperior LED Benefits\r\u003cbr\u003e1. Each unit dialectrically tested.\r\u003cbr\u003e1. 50,000 hour lifespan.\r.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eNRTL Listed for United States \u0026amp; Canada\u003cbr\u003eUnited States \u0026amp; Canada NRTL Listed for \u003cbr\u003eDimensions:  W-11.25\" L-27.5\" H-8.5 \"\u003cbr\u003eWeight:  32 Lbs \u003cbr\u003eTotal Watts: 30 watts \u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e  Universal 120\/277V 50\/60Hz\u003cbr\u003eLow Voltage (Optional):  12-24V DC\u003cbr\u003eLED Lamp Life Expectancy:  50,000+ Hours\u003cbr\u003eEfficiency:  90 Lumens per Watt\u003cbr\u003eOperating Temp Range: T6 rated -30 C to 70 C\u003cbr\u003eBeam Angle:  150 degrees\u003cbr\u003eColor Temp:  5300K \u003cbr\u003eMounting:  Bracket Standard - Pendant Optional\u003cbr\u003eWiring Hub:  1\/2 inch threaded\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38264263901365,"sku":"PL3-EPL-EMG-24-2L-LED","price":3416.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-EMG-24-2L-LED-1.jpg?v=1610917958"},{"product_id":"pl3-epl-hb-150led-rt-dimm","title":"Dimmable C1D1 Explosion Proof 150 Watt High Bay LED Light Fixture - Paint Spray Booth - 21,000 Lumen","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eEPL-HB-150LED-RT-DIMM - C1D1 High Bay LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eListing: United States - Canada\u003c\/td\u003e\n\u003ctd\u003eListed for United States and Canada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: Cree LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass I, Divisions 1 \u0026amp; 2, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 14\"H x 16\"W 5\"D\u003c\/td\u003e\n\u003ctd\u003eClass II, Divisions 1 \u0026amp; 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 32 lbs\u003c\/td\u003e\n\u003ctd\u003eClass III, Divisions 1 \u0026amp; 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 100-277 Volts AC, 50\/60Hz or 11-25 Volts AC\/DC\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 844 Ed. 13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 150W\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 1598\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n \u003ctd\u003eTotal Lumens: 21,000\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 137 Rev 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 140 Lm\/W\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 250.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 60,000+ Hours\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 30-M-1986 Rev 2012\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 5600K, 5000K, 4500K, 4000K, 3500K, 3000K, 2700K, or 6500K\u003c\/td\u003e\n\u003ctd\u003eT5 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: \u0026gt;75 CRI\u003c\/td\u003e\n\u003ctd\u003ePaint Spray Booth Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle: 60°, 125°, or 140°\u003c\/td\u003e\n\u003ctd\u003eIEC 60529 Tested\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003eIP67 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNEMA Type (Lighting): 6H x 6V (60° Optics); 6H x 6V (125° Optics); 6H x 7V (140° Optics)\u003c\/td\u003e\n\u003ctd\u003eLEL Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIES Classification: Type I (60° Optics); Type VS (125° Optics); Type VS (140° Optics)\u003c\/td\u003e\n\u003ctd\u003eMultiple Driver Banks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal Classification: Very Short (60° Optics); Very Short (125° Optics); Short (140° Optics)\u003c\/td\u003e\n\u003ctd\u003e80% Lumen Retention after 60,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutoff Classification: Cutoff\u003c\/td\u003e\n\u003ctd\u003eFactory Sealed Light Fixture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCIE Type: Direct\u003c\/td\u003e\n\u003ctd\u003eRecommended 15` to 40` Mounting Height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBUG Rating: B5-U1-G1 (60° Optics); B4-U1-G1 (125° Optics); B4-U1-G2 (140° Optics)\u003c\/td\u003e\n\u003ctd\u003e0-10V Dimming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Efficiency: \u0026gt;95%\u003c\/td\u003e\n\u003ctd\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor: 0.992\u003c\/td\u003e\n\u003ctd\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n \u003ctd\u003eAmbient Operating Temp Range:-50°C to +65°C\u003c\/td\u003e\n\u003ctd\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp Rating: T5\u003c\/td\u003e\n\u003ctd\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Copper Free Cast Aluminum\u003c\/td\u003e\n\u003ctd\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Finish: Epoxy Powder Coated - Grey\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: Hardened Borosilicate Glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGasket Material: Silicone\u003c\/td\u003e\n\u003ctd\u003eToll Free: 1-800-369-6671\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: 3\/4€ Pendant \u0026amp; Swivel Mount - Both Ship w\/ Fixture\u003c\/td\u003e\n\u003ctd\u003eIntl: 1-214-616-6180\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: 10` 16\/3 SOOW w\/ Flying Leads\u003c\/td\u003e\n\u003ctd\u003eFax: 1-903-498-3364\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring Hub: 3\/4\" NPT\u003c\/td\u003e\n\u003ctd\u003eE-mail: \n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe Larson Electronics EPL-HB-150LED-RT-DIMM Explosion Proof High Bay Dimmable light fixture provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older incandescent, metal halide and high pressure sodium lights.\nThis Class I Division 1 \u0026amp; 2, Class II Division 1 \u0026amp; 2 dimmable explosion proof light fixture provides 21,000 of high quality light while drawing only 150 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install. This explosion proof LED light fixture is dimmable via 0-10V voltage dimming, with dimming output being controlled via a two wire control.\nThis LED light fixture features 0-10V dimming capabilities. This gives operators the ability to manually adjust the brightness of the LED lamp quickly and easily. The 0-10V dimming allows for adjustments to fit the brightness needs of any lighting situation. A 0-10V dimmable light works through the use of a DC control signal that ranges between zero and ten volts. The basic idea is that at 10 volts of input the light is at its brightest level with 0 volts being the lowest possible dimness setting. The smooth, continuous and flicker-free dimming of a 0-10V dimmable LED light is ideal for a wide range of different lighting applications.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n \u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nThe explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twelve individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.\nUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.\nThis light is universal voltage capable and can be operated with 100-277 VAC, 50\/60Hz. This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics. \n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr align=\"center\"\u003e\n\u003ctd\u003eEnergy Consumption Comparison\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eMetal Halide\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eWattage\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e400 watts\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e150 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 120V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e3.83 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.25 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 220V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e2.09 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.68 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 240V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.92 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.63 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 277V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.66 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.54 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 12V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e38.33amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e12.5 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 24V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e19.12 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e6.25amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eLamp Life Expectancy\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e20,000 hours\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e50,000+ hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eOperation cost per year\n(12hs\/day @ 12c\/kWh)\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$241.78\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$78.84\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\" colspan=\"3\"\u003eEach LED light fixture has the potential to save $150.00+ per year in electricity alone, not including maintenance costs, operational downtime, reduced productivity, HVAC loads, or carbon footprint. When retrofitting an entire facility with 100s of light fixtures, the return on investment of LED over metal halide becomes evident. \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nThis LED light produces 21,000 lumens with a color temperature of 5000K and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. We also offer a 3000K warm white and 4000K natural white color temperature options (longer lead times may apply for non-standard temperatures). The EPL-HB-150LED-RT-DIMM offers several mounting options including ceiling mounting, pendant mounting, wall mounting and cable mounting. The standard version of this explosion proof LED fixture includes a pendant mount and a surface mount option. \n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eHigh Quality Features\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 212px;\"\u003e\n1. Low power consumption.\n2. Instant on\/off operation.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. Superior color rendering compared to HPS, LPS, MH.\n5. Retains 80% lumen output after 60,000 operating hours.\n6. Powder coated aluminum fixture body. \n7. Pendant and Swivel Bracket mount included\n8. Low profile - Light weight\n9. 21,000 Lumen output from 150 watts\n10. Dimmable via 0-10 Voltage Dimming \n\u003c\/td\u003e\n\u003ctd\u003e\n1. 60,000 hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off - No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264264851637,"sku":"PL3-EPL-HB-150LED-RT-DIMM","price":3436.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-HB-150LED-RT-DIMM.jpg?v=1628397882"},{"product_id":"pl3-epl-hb-100led-rt","title":"Class I Division 1 Explosion Proof 100 Watt High Bay LED Light Fixture - Paint Spray Booth Approved","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eEPL-HB-100LED-RT - C1D1 High Bay LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eListing: United States - Canada\u003c\/td\u003e\n\u003ctd\u003eListed for United States and Canada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: Cree LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass I, Divisions 1 \u0026amp; 2, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 14\"H x 16\"W 5\"D\u003c\/td\u003e\n\u003ctd\u003eClass II, Divisions 1 \u0026amp; 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 32 lbs\u003c\/td\u003e\n\u003ctd\u003eClass III, Divisions 1 \u0026amp; 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 100-277 Volts AC, 50\/60Hz or 11-25 Volts AC\/DC\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 844 Ed. 13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 100W\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 1598\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 14,000\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 137 Rev 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficiency: 140 Lm\/W\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 250.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 60,000+ Hours\u003c\/td\u003e\n\u003ctd\u003eT5 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 5000K, 4000K, 3000K\u003c\/td\u003e\n\u003ctd\u003ePaint Spray Booth Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: \u0026gt;75 CRI\u003c\/td\u003e\n\u003ctd\u003eIEC 60529 Tested\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle: 60° or 125°\u003c\/td\u003e\n\u003ctd\u003eIP67 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003eLEL Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNEMA Type (Lighting): 6H x 6V (60° Optics); 6H x 6V (125° Optics); 6H x 7V (140° Optics)\u003c\/td\u003e\n\u003ctd\u003eMultiple Driver Banks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIES Classification: Type I (60° Optics); Type VS (125° Optics); Type VS (140° Optics)\u003c\/td\u003e\n\u003ctd\u003e80% Lumen Retention after 60,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal Classification: Very Short (60° Optics); Very Short (125° Optics); Short (140° Optics)\u003c\/td\u003e\n\u003ctd\u003eFactory Sealed Light Fixture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutoff Classification: Cutoff\u003c\/td\u003e\n\u003ctd\u003eRecommended 15` to 40` Mounting Height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCIE Type: Direct\u003c\/td\u003e\n \u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBUG Rating: B4-U1-G0 (60° Optics); B4-U1-G1 (125° Optics); B3-U1-G2 (140° Optics)\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Efficiency: \u0026gt;95%\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor: 0.992\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmperage: 0.83A @ 120V, 0.42 @ 240V, 0.36 @ 277V\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range:-50° C to +65°C\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp Rating: T5\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Copper Free Cast Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: Hardened Borosilicate Glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGasket Material: Silicone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: 3\/4€ Pendant \u0026amp; Swivel Mount - Both Ship w\/ Fixture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: 10` 16\/3 SOOW w\/ Flying Leads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring Hub: 3\/4\" NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe Larson Electronics EPL-HB-100LED-RT Explosion Proof High Bay light fixture provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older incandescent, metal halide and high pressure sodium lights.  \nThis Class I Division 1 \u0026amp; 2, Class II Division 1 \u0026amp; 2 explosion proof light fixture provides 14,000 lumens of high quality light while drawing only 100 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nThe explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains eight individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.\nUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.\nThis light is universal voltage capable and can be operated with 100-277 VAC, 50\/60Hz. We also offer a low voltage version of this LED fixture that operates on AC\/DC voltages from 11-25 Volts. This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics. \n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr align=\"center\"\u003e\n\u003ctd\u003e\nEnergy Consumption Comparison\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eMetal Halide\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eWattage\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e250 watts\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e100 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 120V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e2.38 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e.83 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 220V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.30 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.45 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 240V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.19 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.42 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 277V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.03 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.36 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 12V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e23.75 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e8.3 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 24V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e11.88 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e4.17 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eLamp Life Expectancy\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e20,000 hours\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e50,000+ hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eOperation cost per year\n(12hs\/day @ 12c\/kWh)\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$149.80\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$52.56\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\" colspan=\"3\"\u003eEach LED light fixture has the potential to save ~$100.00+ per year in electricty alone, not including maintainence costs, operational downtime, reduced productivity, HVAC loads, or carbon footprint. When retrofitting an entire facility with 100s of light fixtures, the return on investment of LED over metal halide becomes evident. \n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nThis LED light produces 14,000 lumens with a color temperature of 5000K and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. We also offer a 3000K warm white and 4000K natural white color temperature options (longer lead times may apply for non-standard temperatures). The EPL-HB-100LED-RT offers several mounting options including ceiling mounting, pendant mounting, wall mounting and cable mounting. The standard version of this explosion proof LED fixture includes a pendant mount and a surface mount option. \n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eHigh Quality Features\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 212px;\"\u003e\n1. Low power consumption.\n2. Instant on\/off operation.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. Superior color rendering compared to HPS, LPS, MH.\n5. Retains 80% lumen output after 60,000 operating hours.\n6. Powder coated aluminum fixture body. \n7. Pendant and Swivel Bracket mount included\n8. Low profile - Light weight\n9. 14,000 Lumen output from 100 watts\n\n\n\n\n\n\n\n\n\u003c\/td\u003e\n\u003ctd\u003e\n1. 60,000 hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off €“ No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264265015477,"sku":"PL3-EPL-HB-100LED-RT","price":2992.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-HB-100LED-RT.jpg?v=1628397863"},{"product_id":"pl3-epl-hb-2x100led-rt","title":"Class 1 Division 1 Explosion Proof 200 Watt High Bay LED Light Fixture - Paint Spray Booth Approved","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eEPL-HB-2X100LED-RT - C1D1 High Bay LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: Cree LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eListed for United States and Canada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 27.85\"L x 16.07\"W x 16.76\"H\u003c\/td\u003e\n\u003ctd\u003eClass I, Divisions 1 \u0026amp; 2, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 67 lbs\u003c\/td\u003e\n\u003ctd\u003eClass II, Divisions 1 \u0026amp; 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 100-277 Volts AC, 50\/60Hz, 11-25 Volts AC\/DC, 18-48V AC\/DC, 347-480V high voltage, 125-250V DC, and 0-10V dimmable\u003c\/td\u003e\n\u003ctd\u003eClass III, Divisions 1 \u0026amp; 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 200W\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 844 Ed. 13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 28,000\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 1598\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 140 Lm\/W\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 137 Rev 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 60,000+ Hours\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 250.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 5000K, 4000K, 3000K\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 30-M-1986 Rev 2012\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: \u0026gt;75 CRI\u003c\/td\u003e\n\u003ctd\u003eT5 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle: 60° or 125°\u003c\/td\u003e\n\u003ctd\u003ePaint Spray Booth Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003eABS Type Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Efficiency: \u0026gt;95%\u003c\/td\u003e\n\u003ctd\u003eIEC 60529 Tested\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor:  0.992\u003c\/td\u003e\n\u003ctd\u003eIP67 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmp Draw: 1.67A @ 120V, 0.83A @ 240V, 0.72A @ 277V, 8.33A @ 24V\u003c\/td\u003e\n\u003ctd\u003eLEL Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range: -50°C to +85°C\u003c\/td\u003e\n\u003ctd\u003eMultiple Driver Banks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp Rating: T5\u003c\/td\u003e\n\u003ctd\u003e80% Lumen Retention after 60,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Copper Free Cast Aluminum\u003c\/td\u003e\n\u003ctd\u003eFactory Sealed Light Fixture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Finish: Epoxy Powder Coated - Grey\u003c\/td\u003e\n\u003ctd\u003eField Serviceable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: Hardened Borosilicate Glass\u003c\/td\u003e\n\u003ctd\u003eRecommended 15` to 40` Mounting Height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGasket Material: Silicone\u003c\/td\u003e\n\u003ctd\u003eMade in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Swivel Mount or Pendant Mount\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring Hub: 3\/4\" NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in Texas \nThe Larson Electronics EPL-HB-2X100LED-RT Explosion Proof High Bay light fixture provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. This Class I Division 1 \u0026amp; 2 and Class II Division 1 \u0026amp; 2 LED fixture provides 28,000 lumens at 200 watts. Paint spray booth listed, this high output fixture is designed for installation in locations where flammable gases, vapors and liquids, combustible dusts, and\/or ignitable fibers and flyings exist or have the potential to exist. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older metal halide and high pressure sodium lights.\n***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*** \nThis Class I Division 1 \u0026amp; 2, Class II Division 1 \u0026amp; 2 explosion proof light fixture provides 28,000 of high quality light while drawing only 200 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\nLED Drivers: Even in LED fixtures, heat is the single largest factor in premature light failure and color shifting. As a result, many manufacturers reduce the output of their LEDs in order to reduce the amount of heat produced. Rather than lower light output or quality, Larson Electronics addresses this problem with the addition of electronic LED drivers. These internal drivers provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. This not only reduces the energy dissipation, effectively lowering the operating temperature of the fixture, but also prevents AC over-voltage and short circuit loading making this fixture virtually maintenance free. Because the electronic drivers allow the EPL-HB-2X150LED-RT to run at a cooler internal temperature and regulates the electrical current, energy efficiency and LED service hours are maximized while at the same time reducing operating costs and downtime incurred from the frequent servicing intervals required with other hotter running lights.\nThe explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. With the EPL-HB-2X100LED-RT series of explosion proof lamps from Larson Electronics, each LED fixture contains twelve individual LED boards configured in a series of banks. Each bank contains two LED on a single board with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n \u003ctr\u003e\n\u003ctd colspan=\"3\"\u003eClick Photos to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e60° Beam Angle \u003c\/td\u003e\n\u003ctd\u003e125° Beam Angle \u003c\/td\u003e\n\u003ctd\u003e140° Beam Angle \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nBeam Angles: When used as a fixed mount fixture, the varying beam angles need to be mounted at certain heights in order to achieve the greatest coverage and efficiency in both high bay and low bay lighting situations. The 60° beam should be mounted in high bay fixtures over 25` in height and 25` away from objects if used as a wall mounted light. The 125° beam is ideal for low bay fixtures in a height range of 15-25 feet and the same distance away from objects when the wall mounting option is employed. The 140° beam is best used as a low bay fixture in areas with a ceiling height of 15` or less or for illuminating objects up to 15` away when wall mounted.\nThis LED light fixture produces a total of 28,000 lumens with a color temperature of 5000K standard and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. We also offer a 3000K warm white and 4000K natural white color temperature options (longer lead times may apply for non-standard temperatures). This lamp uses Cree LED units that have been chosen for their high lumen per watt ratio and extreme longevity. These Cree LEDs generate a robust 140 lumens per watt effective lumen output and have a 80% lumen retention at 60,000 hours, giving them better efficiency and operational life than traditional light sources.\nField Serviceability: This explosion proof LED light fixture is field serviceable. All major internal components can be purchased from Larson Electronics and installed by a licensed electrician with basic tools. With most explosion proof fixtures, the fixture must be returned to the manufacturer for repair work, which presents downtime and long turn around times for repair work. Larson Electronics addresses this issue with the EPL-HB-2X100LED-RT series with field serviceability, allowing operators to perform service work without having to return the fixture to the manufacturer in the event of damage or failure.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr align=\"center\"\u003e\n\u003ctd\u003eEnergy Consumption Comparison\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eMetal Halide\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eWattage\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e800* watts\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e200 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 120V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e7.67 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.67 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 220V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e4.19 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.91 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 240V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e3.84 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.83 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 277V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e3.33 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.72 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 12V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e66.67 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e16.67 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 24V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e38.34 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e8.33 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eLamp Life Expectancy\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e20,000 hours\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e60,000+ hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eOperation cost per year\n(12hs\/day @ 12c\/kWh)\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$483.56\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$105.12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 117px;\"\u003e*Includes ballast factor of 1.15 for metal halide\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\" colspan=\"3\"\u003eEach LED light fixture has the potential to save $325.00+ per year in electricity alone, not including maintenance costs, operational downtime, reduced productivity, HVAC loads, or carbon footprint. When retrofitting an entire facility with 100s of light fixtures, the return on investment of LED over metal halide becomes evident.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nVoltage: This light is universal voltage capable and can be operated with 100-277V AC, 50\/60 Hz without modifications to the fixture, and a low voltage version of this LED fixture that operates on AC\/DC voltages from 11-25 volts for rigs and vision systems. 18-48V AC\/DC voltages are available for network systems and marine vessels. We also offer an additional 347-480V high voltage, 125-250V DC, and 0-10V dimmable versions of this explosion proof LED light fixture.\nMounting: The EPL-HB-2X100LED-RT offers several mounting options including ceiling mounting, pendant mounting, and wall mounting. Ceiling and wall applications are mounted using the adjustable swivel mount bracket found on the rear of the unit. Pendant applications are mounted from the ceiling and are suspended by rigid pipe via the 3\/4\" NPT hub on the back of the explosion proof fixture. Wiring is fed through rigid pipe to the junction box and tied in to the fixture`s lead wires, completing the electrical connection.\nThis explosion proof LED light fixture is paint spray booth listed, IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics.\nSuggested Applications: The EPL-HB-2X100LED-RT is approved for use within environments where flammable or combustible gases, vapors, dusts, fibers, and flying exist or stand the potential to exist, and is ideal for a wide variety of applications.\nApplications include but not limited to aircraft maintenance, alcohol processing, aerospace, chemical manufacturing, coke processing, cold storage, compressed natural gas (CNG) facilities, cranes, cryogenics, distilleries, food processing (with food grade gasketed polycarbonate lens: ), fuel storage, gas processing plants, grain processing, laboratories, liquefied natural gas (LNG) facilities, liquid propane gas (LPG), manufacturing, marine vessels, methane production, mining, offshore, oil drilling rigs, oil refineries, paint spray booths, paper processing, petrochemical, pharmaceuticals, power plants, production refineries, sand blast cabinets, sewage and septic tanks, shipyards, solvent and cleaning areas, storage facilities, tank farms, tankers, textile, washdown areas, waste treatment plants, and woodworking. .\n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eHigh Quality Features\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 212px;\"\u003e\n1. Low power consumption.\n2. Instant on\/off operation.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. Superior color rendering compared to HPS, LPS, MH.\n5. Retains 80% lumen output after 60,000 operating hours.\n6. Powder coated aluminum fixture body. \n7. Pendant and Swivel Bracket mount included\n8. Low profile - Light weight\n 9. 28,000 Lumen output from only 200 watts\n10. Multiple LED Driver Banks for Redundancy\n11. Paint Spray Booth Approved\n\u003c\/td\u003e\n\u003ctd\u003e\n1. 60,000 hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off - No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264265146549,"sku":"PL3-EPL-HB-2X100LED-RT","price":7768.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-HB-2X100LED-RT.jpg?v=1628397853"},{"product_id":"pl3-epl-hb-2x150led-rt","title":"Class 1 Division 1 Explosion Proof 300 Watt High Bay LED Light Fixture - Paint Spray Booth Approved","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eEPL-HB-2X150LED-RT - C1D1 High Bay LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: Cree LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eListed for United States and Canada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 27.85\"L x 16.07\"W x 16.76\"H\u003c\/td\u003e\n\u003ctd\u003eClass I, Divisions 1 \u0026amp; 2, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 67 lbs\u003c\/td\u003e\n\u003ctd\u003eClass II, Divisions 1 \u0026amp; 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 100-277 Volts AC, 50\/60Hz, 11-25 Volts AC\/DC, 18-48V AC\/DC, 347-480V high voltage, 125-250V DC, and 0-10V dimmable\u003c\/td\u003e\n\u003ctd\u003eClass III, Divisions 1 \u0026amp; 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 300W\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 844 Ed. 13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 42,000\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 1598\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 140 Lm\/W\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 137 Rev 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 60,000+ Hours\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 250.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 5000K, 4000K, 3000K\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 30-M-1986 Rev 2012\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: \u0026gt;75 CRI\u003c\/td\u003e\n\u003ctd\u003eT5 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle: 60°, 125°, or 140°\u003c\/td\u003e\n\u003ctd\u003ePaint Spray Booth Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003eABS Type Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Efficiency: \u0026gt;95%\u003c\/td\u003e\n\u003ctd\u003eIEC 60529 Tested\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor:  0.992\u003c\/td\u003e\n\u003ctd\u003eIP67 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmp Draw: 2.5A @ 120V, 1.25A @ 240V, 1.08A @ 277V, 12.5A @ 24V\u003c\/td\u003e\n\u003ctd\u003eLEL Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range: -50° C to +85°C\u003c\/td\u003e\n\u003ctd\u003eMultiple Driver Banks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp Rating: T5\u003c\/td\u003e\n\u003ctd\u003e80% Lumen Retention after 60,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Copper Free Cast Aluminum\u003c\/td\u003e\n\u003ctd\u003eFactory Sealed Light Fixture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Finish: Epoxy Powder Coated - Grey\u003c\/td\u003e\n\u003ctd\u003eField Serviceable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: Hardened Borosilicate Glass\u003c\/td\u003e\n\u003ctd\u003eRecommended 15` to 40` Mounting Height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGasket Material: Silicone\u003c\/td\u003e\n\u003ctd\u003eMade in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Swivel Mount or Pendant Mount\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring Hub: 3\/4\" NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in Texas \nThe Larson Electronics EPL-HB-2X150LED-RT Explosion Proof High Bay light fixture provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. This Class I Division 1 \u0026amp; 2 and Class II Division 1 \u0026amp; 2 LED fixture provides 42,000 lumens at 300 watts. Paint spray booth listed, this high output fixture is designed for installation in locations where flammable gases, vapors and liquids, combustible dusts, and\/or ignitable fibers and flyings exist or have the potential to exist. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older metal halide and high pressure sodium lights.\n***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*** \nThis Class I Division 1 \u0026amp; 2, Class II Division 1 \u0026amp; 2 explosion proof light fixture provides 35,000 of high quality light while drawing only 300 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\nLED Drivers: Even in LED fixtures, heat is the single largest factor in premature light failure and color shifting. As a result, many manufacturers reduce the output of their LEDs in order to reduce the amount of heat produced. Rather than lower light output or quality, Larson Electronics addresses this problem with the addition of electronic LED drivers. These internal drivers provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. This not only reduces the energy dissipation, effectively lowering the operating temperature of the fixture, but also prevents AC over-voltage and short circuit loading making this fixture virtually maintenance free. Because the electronic drivers allow the EPL-HB-2X150LED-RT to run at a cooler internal temperature and regulates the electrical current, energy efficiency and LED service hours are maximized while at the same time reducing operating costs and downtime incurred from the frequent servicing intervals required with other hotter running lights.\nThe explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. With the EPL-HB-2X150LED-RT series of explosion proof lamps from Larson Electronics, each LED fixture contains twelve individual LED boards configured in a series of banks. Each bank contains two LED on a single board with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd colspan=\"3\"\u003eClick Photos to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n \u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e60° Beam Angle \u003c\/td\u003e\n\u003ctd\u003e125° Beam Angle Plug \u003c\/td\u003e\n\u003ctd\u003e140° Beam Angle Plug \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nBeam Angles: When used as a fixed mount fixture, the varying beam angles need to be mounted at certain heights in order to achieve the greatest coverage and efficiency in both high bay and low bay lighting situations. The 60° beam should be mounted in high bay fixtures over 25` in height and 25` away from objects if used as a wall mounted light. The 125° beam is ideal for low bay fixtures in a height range of 15-25 feet and the same distance away from objects when the wall mounting option is employed. The 140° beam is best used as a low bay fixture in areas with a ceiling height of 15` or less or for illuminating objects up to 15` away when wall mounted.\nEach LED light on this unit produces 42,000 lumens with a color temperature of 5000K standard and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. We also offer a 3000K warm white and 4000K natural white color temperature options (longer lead times may apply for non-standard temperatures). This lamp uses Cree LED units that have been chosen for their high lumen per watt ratio and extreme longevity. These Cree LEDs generate a robust 140 lumens per watt effective lumen output and have a 80% lumen retention at 60,000 hours, giving them better efficiency and operational life than traditional light sources.\nField Serviceability: This explosion proof LED light fixture is field serviceable. All major internal components can be purchased from Larson Electronics and installed by a licensed electrician with basic tools. With most explosion proof fixtures, the fixture must be returned to the manufacturer for repair work, which presents downtime and long turn around times for repair work. Larson Electronics addresses this issue with the EPL-HB-2X150LED-RT series with field serviceability, allowing operators to perform service work without having to return the fixture to the manufacturer in the event of damage or failure.\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr align=\"center\"\u003e\n\u003ctd\u003eEnergy Consumption Comparison\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eMetal Halide\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eWattage\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e800* watts\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e300 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 120V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e7.67 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e2.5 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 220V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e4.19 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.37 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 240V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e3.84 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.25 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 277V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e3.33 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.08 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 12V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e66.67 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e25 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 24V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e38.34 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e12.5 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eLamp Life Expectancy\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e20,000 hours\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e60,000+ hours\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eOperation cost per year\n(12hs\/day @ 12c\/kWh)\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$483.56\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$157.68\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 117px;\"\u003e*Includes ballast factor of 1.15 for metal halide\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\" colspan=\"3\"\u003eEach LED light fixture has the potential to save $325.00+ per year in electricity alone, not including maintenance costs, operational downtime, reduced productivity, HVAC loads, or carbon footprint. When retrofitting an entire facility with 100s of light fixtures, the return on investment of LED over metal halide becomes evident. \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nVoltage: This light is universal voltage capable and can be operated with 100-277V AC, 50\/60 Hz without modifications to the fixture, and a low voltage version of this LED fixture that operates on AC\/DC voltages from 11-25 volts for rigs and vision systems. 18-48V AC\/DC voltages are available for network systems and marine vessels. We also offer an additional 347-480V high voltage, 125-250V DC, and 0-10V dimmable versions of this explosion proof LED light fixture. \nMounting: The EPL-HB-2X150LED-RT offers several mounting options including ceiling mounting, pendant mounting, and wall mounting. Ceiling and wall applications are mounted using the adjustable swivel mount bracket found on the rear of the unit. Pendant applications are mounted from the ceiling and are suspended by rigid pipe via the 3\/4\" NPT hub on the back of the explosion proof fixture. Wiring is fed through rigid pipe to the junction box and tied in to the fixture€™s lead wires, completing the electrical connection.\nThis explosion proof LED light fixture is paint spray booth listed, IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics.\nSuggested Applications: The EPL-HB-2X150LED-RT is approved for use within environments where flammable or combustible gases, vapors, dusts, fibers, and flying exist or stand the potential to exist, and is ideal for a wide variety of applications.\nApplications include but not limited to aircraft maintenance, alcohol processing, aerospace, chemical manufacturing, coke processing, cold storage, compressed natural gas (CNG) facilities, cranes, cryogenics, distilleries, food processing (with food grade gasketed polycarbonate lens: ), fuel storage, gas processing plants, grain processing, laboratories, liquefied natural gas (LNG) facilities, liquid propane gas (LPG), manufacturing, marine vessels, methane production, mining, offshore, oil drilling rigs, oil refineries, paint spray booths, paper processing, petrochemical, pharmaceuticals, power plants, production refineries, sand blast cabinets, sewage and septic tanks, shipyards, solvent and cleaning areas, storage facilities, tank farms, tankers, textile, washdown areas, waste treatment plants, and woodworking. .\n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eHigh Quality Features\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 212px;\"\u003e\n1. Low power consumption.\n2. Instant on\/off operation.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. Superior color rendering compared to HPS, LPS, MH.\n5. Retains 80% lumen output after 60,000 operating hours.\n6. Powder coated aluminum fixture body. \n7. Pendant and Swivel Bracket mount included\n8. Low profile - Light weight\n9. 42,000 Lumen output from only 300 watts\n10. Multiple LED Driver Banks for Redundancy\n11. Paint Spray Booth Approved\n\u003c\/td\u003e\n\u003ctd\u003e\n1. 60,000 hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off - No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264265244853,"sku":"PL3-EPL-HB-2X150LED-RT","price":10018.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-HB-2X150LED-RT.jpg?v=1628397854"},{"product_id":"pl3-epl-hb-3x150led-rt","title":"Class 1 Division 1 Explosion Proof 450 Watt High Bay LED Light Fixture - Paint Spray Booth Approved","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eEPL-HB-3X150LED-RT - C1D1 High Bay LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: Cree LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eListed for United States and Canada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 27.85\"L x 16.07\"W x 16.76\"H\u003c\/td\u003e\n\u003ctd\u003eClass I, Divisions 1 \u0026amp; 2, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 67 lbs\u003c\/td\u003e\n\u003ctd\u003eClass II, Divisions 1 \u0026amp; 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 100-277 Volts AC, 50\/60Hz, 11-25 Volts AC\/DC, 18-48V AC\/DC, 347-480V high voltage, 125-250V DC, and 0-10V dimmable\u003c\/td\u003e\n\u003ctd\u003eClass III, Divisions 1 \u0026amp; 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 450W\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 844 Ed. 13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 52,500\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 1598\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 116.67 Lm\/W\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 137 Rev 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 60,000+ Hours\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 250.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 5000K, 4000K, 3000K\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 30-M-1986 Rev 2012\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: \u0026gt;75 CRI\u003c\/td\u003e\n\u003ctd\u003eT5 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle: 60° or 125°\u003c\/td\u003e\n\u003ctd\u003ePaint Spray Booth Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003eABS Type Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Efficiency: \u0026gt;95%\u003c\/td\u003e\n\u003ctd\u003eIEC 60529 Tested\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor:  0.992\u003c\/td\u003e\n\u003ctd\u003eIP67 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmp Draw: 2.5A @ 120V, 1.25A @ 240V, 1.08A @ 277V, 12.5A @ 24V\u003c\/td\u003e\n\u003ctd\u003eLEL Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range: -50° C to +85°C\u003c\/td\u003e\n\u003ctd\u003eMultiple Driver Banks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp Rating: T5\u003c\/td\u003e\n\u003ctd\u003e80% Lumen Retention after 60,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Copper Free Cast Aluminum\u003c\/td\u003e\n\u003ctd\u003eFactory Sealed Light Fixture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Finish: Epoxy Powder Coated - Grey\u003c\/td\u003e\n\u003ctd\u003eField Serviceable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: Hardened Borosilicate Glass\u003c\/td\u003e\n\u003ctd\u003eRecommended 15` to 40` Mounting Height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGasket Material: Silicone\u003c\/td\u003e\n\u003ctd\u003eMade in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Swivel Mount or Pendant Mount\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring Hub: 3\/4\" NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in Texas \nThe Larson Electronics EPL-HB-3X150LED-RT Explosion Proof High Bay light fixture provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. This Class I Division 1 \u0026amp; 2 and Class II Division 1 \u0026amp; 2 LED fixture provides 52,500 lumens at 450 watts. Paint spray booth listed, this high output fixture is designed for installation in locations where flammable gases, vapors and liquids, combustible dusts, and\/or ignitable fibers and flyings exist or have the potential to exist. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older metal halide and high pressure sodium lights.\n***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*** \nThis Class I Division 1 \u0026amp; 2, Class II Division 1 \u0026amp; 2 explosion proof light fixture provides 52,500 of high quality light while drawing only 450 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\nLED Drivers: Even in LED fixtures, heat is the single largest factor in premature light failure and color shifting. As a result, many manufacturers reduce the output of their LEDs in order to reduce the amount of heat produced. Rather than lower light output or quality, Larson Electronics addresses this problem with the addition of electronic LED drivers. These internal drivers provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. This not only reduces the energy dissipation, effectively lowering the operating temperature of the fixture, but also prevents AC over-voltage and short circuit loading making this fixture virtually maintenance free. Because the electronic drivers allow the EPL-HB-3X150LED-RT to run at a cooler internal temperature and regulates the electrical current, energy efficiency and LED service hours are maximized while at the same time reducing operating costs and downtime incurred from the frequent servicing intervals required with other hotter running lights.\nThe explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. With the EPL-HB-3X150LED-RT series of explosion proof lamps from Larson Electronics, each LED fixture contains twelve individual LED boards configured in a series of banks. Each bank contains two LED on a single board with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd colspan=\"3\"\u003eClick Photos to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e60° Beam Angle \u003c\/td\u003e\n\u003ctd\u003e125° Beam Angle Plug \u003c\/td\u003e\n\u003ctd\u003e140° Beam Angle Plug \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nBeam Angles: When used as a fixed mount fixture, the varying beam angles need to be mounted at certain heights in order to achieve the greatest coverage and efficiency in both high bay and low bay lighting situations. The 60° beam should be mounted in high bay fixtures over 25` in height and 25` away from objects if used as a wall mounted light. The 125° beam is ideal for low bay fixtures in a height range of 15-25 feet and the same distance away from objects when the wall mounting option is employed. The 140° beam is best used as a low bay fixture in areas with a ceiling height of 15` or less or for illuminating objects up to 15` away when wall mounted.\nEach LED light on this unit produces 17,500 lumens for a total of 52,500 lumens with a color temperature of 5000K standard and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. We also offer a 3000K warm white and 4000K natural white color temperature options (longer lead times may apply for non-standard temperatures). This lamp uses Cree LED units that have been chosen for their high lumen per watt ratio and extreme longevity. These Cree LEDs generate a robust 116.67 lumens per watt effective lumen output and have a 80% lumen retention at 60,000 hours, giving them better efficiency and operational life than traditional light sources.\nField Serviceability: This explosion proof LED light fixture is field serviceable. All major internal components can be purchased from Larson Electronics and installed by a licensed electrician with basic tools. With most explosion proof fixtures, the fixture must be returned to the manufacturer for repair work, which presents downtime and long turn around times for repair work. Larson Electronics addresses this issue with the EPL-HB-3X150LED-RT series with field serviceability, allowing operators to perform service work without having to return the fixture to the manufacturer in the event of damage or failure.\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr align=\"center\"\u003e\n\u003ctd\u003eEnergy Consumption Comparison\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eMetal Halide\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eWattage\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e800* watts\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e450 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 120V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e7.67 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e2.5 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 220V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e4.19 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.37 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 240V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e3.84 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.25 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 277V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e3.33 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.08 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 12V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e66.67 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e25 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 24V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e38.34 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e12.5 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eLamp Life Expectancy\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e20,000 hours\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e60,000+ hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eOperation cost per year\n(12hs\/day @ 12c\/kWh)\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$483.56\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$236.52\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 117px;\"\u003e*Includes ballast factor of 1.15 for metal halide\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\" colspan=\"3\"\u003eEach LED light fixture has the potential to save $246.00+ per year in electricity alone, not including maintenance costs, operational downtime, reduced productivity, HVAC loads, or carbon footprint. When retrofitting an entire facility with 100s of light fixtures, the return on investment of LED over metal halide becomes evident. \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nVoltage: This light is universal voltage capable and can be operated with 100-277V AC, 50\/60 Hz without modifications to the fixture, and a low voltage version of this LED fixture that operates on AC\/DC voltages from 11-25 volts for rigs and vision systems. 18-48V AC\/DC voltages are available for network systems and marine vessels. We also offer an additional 347-480V high voltage, 125-250V DC, and 0-10V dimmable versions of this explosion proof LED light fixture. \nMounting: The EPL-HB-3X150LED-RT offers several mounting options including ceiling mounting, pendant mounting, and wall mounting. Ceiling and wall applications are mounted using the adjustable swivel mount bracket found on the rear of the unit. Pendant applications are mounted from the ceiling and are suspended by rigid pipe via the 3\/4\" NPT hub on the back of the explosion proof fixture. Wiring is fed through rigid pipe to the junction box and tied in to the fixture€™s lead wires, completing the electrical connection.\nThis explosion proof LED light fixture is paint spray booth listed, IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics.\nSuggested Applications: The EPL-HB-3X150LED-RT is approved for use within environments where flammable or combustible gases, vapors, dusts, fibers, and flying exist or stand the potential to exist, and is ideal for a wide variety of applications.\nApplications include but not limited to aircraft maintenance, alcohol processing, aerospace, chemical manufacturing, coke processing, cold storage, compressed natural gas (CNG) facilities, cranes, cryogenics, distilleries, food processing (with food grade gasketed polycarbonate lens: ), fuel storage, gas processing plants, grain processing, laboratories, liquefied natural gas (LNG) facilities, liquid propane gas (LPG), manufacturing, marine vessels, methane production, mining, offshore, oil drilling rigs, oil refineries, paint spray booths, paper processing, petrochemical, pharmaceuticals, power plants, production refineries, sand blast cabinets, sewage and septic tanks, shipyards, solvent and cleaning areas, storage facilities, tank farms, tankers, textile, washdown areas, waste treatment plants, and woodworking. .\n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eHigh Quality Features\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 212px;\"\u003e\n1. Low power consumption.\n2. Instant on\/off operation.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. Superior color rendering compared to HPS, LPS, MH.\n5. Retains 80% lumen output after 60,000 operating hours.\n6. Powder coated aluminum fixture body. \n7. Pendant and Swivel Bracket mount included\n8. Low profile - Light weight\n9. 52,500 Lumen output from only 450 watts\n10. Multiple LED Driver Banks for Redundancy\n11. Paint Spray Booth Approved\n\u003c\/td\u003e\n\u003ctd\u003e\n1. 60,000 hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off - No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264265277621,"sku":"PL3-EPL-HB-3X150LED-RT","price":12002.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-HB-3X150LED-RT.jpg?v=1628397832"},{"product_id":"pl3-epl-ibm-2x150led-rt","title":"Class 1 Division 1 Explosion Proof 300 Watt High Bay LED Light Fixture w\/ I-Beam Mount - Paint Booth","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eEPL-IBM-2X150LED-RT - C1D1 I-Beam LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003e\nLamp Type: Cree LED\n\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass 1 Division 1, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 28\"L x 16\"W 5\"D\u003c\/td\u003e\n\u003ctd\u003eClass 1 Division 2, Groups C, D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 64lbs\u003c\/td\u003e\n\u003ctd\u003eClass 2, Divisions 1 \u0026amp; 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 100-277 Volts AC, 50\/60Hz or 11-25 Volts AC\/DC\u003c\/td\u003e\n\u003ctd\u003eClass 3, Divisions 1 \u0026amp; 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 300W\u003c\/td\u003e\n\u003ctd\u003eT5 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 35,000 \u003c\/td\u003e\n\u003ctd\u003eCertified to UL844 and C22.2 Standards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 116.67 Lm\/W\u003c\/td\u003e\n\u003ctd\u003ePaint Spray Booth Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003eLEL Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemp Rating: -50°C to +85°C\u003c\/td\u003e\n\u003ctd\u003eIP67 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 5000K, 4000K, 3000K\u003c\/td\u003e\n\u003ctd\u003eMultiple Driver Banks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: \u0026gt;75\u003c\/td\u003e\n\u003ctd\u003e80% Lumen Retention after 50,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 60,000+ Hours\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: I-Beam Mount Swivel Bracket \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA \nThe Larson Electronics EPL-IBM-2X150LED-RT Explosion Proof I-Beam Mount light fixture provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older fixtures. \n***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*** \nThis Class 1 Division 1 \u0026amp; 2, Class 2 Division 1 \u0026amp; 2 explosion proof light fixture provides 35,000 of high quality light while drawing only 300 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 83px;\"\u003e\nThe explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twenty-four individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.\nUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.\nThis light is universal voltage capable and can be operated with 100-277 VAC, 50\/60Hz. We also offer a low voltage version of this LED fixture that operates on AC\/DC voltages from 11-25 Volts. This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics. \nThis LED light produces 35,000 lumens with a color temperature of 5000K, 4000K, or 3000K and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. The EPL-IBM-2X150LED-RT specially designed I-beam mount allowed operators to install this high bay light fixture on existing I-beams via nine per-drilled holes. After installation, operators can tilt the light 90° in both directions, allowing for precise aiming. The EPL-IBM-2X150LED-RT is LEL approved for LED quality and energy efficiency for commercial locations and applicable for Class 1 Division 1 work areas, such as tanks and refineries, silos, loading facilities, and other similar environments. \n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eHigh Quality Features\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 212px;\"\u003e\n1. Low power consumption.\n2. Instant on\/off operation.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. Superior color rendering compared to HPS, LPS, MH.\n5. Retains 80% lumen output after 60,000 operating hours.\n6. Powder coated aluminum fixture body. \n7. Pendant and Swivel Bracket mount included\n8. Low profile - Light weight\n9. 35,000 Lumen output from only 300 watts\n10. Multiple LED Driver Banks for Redundancy\n11. Paint Spray Booth Approved\n12. LEL Approved for Rebates \n\u003c\/td\u003e\n\u003ctd\u003e\n1. 60,000 hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off €“ No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 380px;\"\u003e\n \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264265310389,"sku":"PL3-EPL-IBM-2X150LED-RT","price":9192.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-IBM-2X150LED-RT.jpg?v=1628397829"},{"product_id":"pl3-epl-hb-100led-rt-cm-480v","title":"Larson Ceiling Mount Explosion Proof 100 Watt High Bay LED Light Fixture - Paint Spray Booth Approved - 347\/480V","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003eThe Larson Electronics EPL-HB-100LED-RT-CM-480V Ceiling Mount Explosion Proof High Bay light fixture provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older incandescent, metal halide and high pressure sodium lights.\r\u003cbr\u003eThis Class I Division 1 \u0026amp; 2, Class II Division 1 \u0026amp; 2 explosion proof light fixture provides 11,667 of high quality light while drawing only 100 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.\r\u003cbr\u003eThe explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains eight individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.\r\u003cbr\u003eUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied and emit light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.\r\u003cbr\u003eThis light is universal voltage capable and can be operated with 347\/480VAC, 50\/60Hz. This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics.\r\u003cbr\u003eEnergy Consumption Comparison\r\u003cbr\u003eMetal Halide\r\u003cbr\u003eLED\r\u003cbr\u003eWattage\r\u003cbr\u003e250 watts\r\u003cbr\u003e100 watts\r\u003cbr\u003eAmp Draw @ 120V AC\r\u003cbr\u003e2.38 amps\r\u003cbr\u003e.83 amps\r\u003cbr\u003eAmp Draw @ 220V AC\r\u003cbr\u003e1.30 amps\r\u003cbr\u003e0.45 amps\r\u003cbr\u003eAmp Draw @ 240V AC\r\u003cbr\u003e1.19 amps\r\u003cbr\u003e0.42 amps\r\u003cbr\u003eAmp Draw @ 277V AC\r\u003cbr\u003e1.03 amps\r\u003cbr\u003e0.36 amps\r\u003cbr\u003eAmp Draw @ 12V DC\r\u003cbr\u003e23.75 amps\r\u003cbr\u003e8.3 amps\r\u003cbr\u003eAmp Draw @ 24V DC\r\u003cbr\u003e11.88 amps\r\u003cbr\u003e4.17\r\u003cbr\u003eamps\r\u003cbr\u003eLamp Life Expectancy\r\u003cbr\u003e20,000 hours\r\u003cbr\u003e50,000+ hours\r\u003cbr\u003eOperation cost per year\r\u003cbr\u003e$149.80\r\u003cbr\u003e$52.56\r\u003cbr\u003eEach LED light fixture has the potential to save ~$100.00+ per year in electricity alone, not including maintenance costs, operational downtime, reduced productivity, HVAC loads, or carbon footprint. When retrofitting an entire facility with 100s of light fixtures, the return on investment of LED over metal halide becomes evident.\r\u003cbr\u003eThis LED light produces 11,667 lumens with a color temperature of 5000K and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. We also offer a 3000K warm white and 4000K natural white color temperature options (longer lead times may apply for non-standard temperatures). The standard version of this explosion proof LED fixture includes a flat surface ceiling mount with four 3\/4\" NPT entries.\r\u003cbr\u003eHigh Quality Features\r\u003cbr\u003eSuperior LED Benefits\r\u003cbr\u003e1. Low power consumption.\r\u003cbr\u003e1. 60,000 hour lifespan.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eListing: United States - Canada\u003cbr\u003eLamp Type: Cree LED\u003cbr\u003eDimensions:  14\"H x 16\"W x 11\"D\u003cbr\u003eWeight: 35 lbs.\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e 347\/480V AC\u003cbr\u003eTotal Watts:  100W\u003cbr\u003eTotal Lumens: 11,667\u003cbr\u003eLuminous Efficiency: 116.67 Lm\/W\u003cbr\u003eLamp Life: 60,000+ Hours\u003cbr\u003eColor Temp:  5000K, 4000K, 3000K\u003cbr\u003eColor Rendering Index:  \u0026gt;75 CRI\u003cbr\u003eBeam Angle:  60° or 125°\u003cbr\u003eLighting Configuration:  Flood Pattern\u003cbr\u003ePower Efficiency:  \u0026gt;95%\u003cbr\u003ePower Factor:  0.992\u003cbr\u003eAmperage:  0.83A @ 120V, 0.42 @ 240V, 0.36 @ 277V\u003cbr\u003eAmbient Operating Temp Range: -50° C to +65°C\u003cbr\u003eOperating Temp Rating:  T5\u003cbr\u003eHousing Material:  Copper Free Cast Aluminum\u003cbr\u003eLens Material:  Hardened Borosilicate Glass\u003cbr\u003eGasket Material:  Silicone\u003cbr\u003eMounting:  Ceiling Mount Junction Box\u003cbr\u003eWiring:  (4) 3\/4\" NPT Hubs on Ceiling Mount\u003cbr\u003eWiring Hub:  3\/4\" NPT\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38264265408693,"sku":"PL3-EPL-HB-100LED-RT-CM-480V","price":3630.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/missingProductImage_3657d9b3-f31a-4137-9082-4fec77c6809a.png?v=1610918046"},{"product_id":"pl3-epl-hb-125led-rt-cm","title":"Ceiling Mount Explosion Proof 125 Watt High Bay LED Light Fixture - Paint Spray Booth Approved","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eEPL-HB-125LED-RT-CM - C1D1 High Bay LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eListing: United States - Canada\u003c\/td\u003e\n\u003ctd\u003eListed for United States and Canada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: Cree LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass I, Divisions 1 \u0026amp; 2, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 14\"H x 16\"W x 11\"D\u003c\/td\u003e\n\u003ctd\u003eClass II, Divisions 1 \u0026amp; 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 35 lbs\u003c\/td\u003e\n\u003ctd\u003eClass III, Divisions 1 \u0026amp; 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 100-277 Volts AC, 50\/60Hz or 11-25 Volts AC\/DC\u003c\/td\u003e\n\u003ctd\u003eATEX EX II 3G Exd IIB T5 Ga\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 125W\u003c\/td\u003e\n\u003ctd\u003eATEX EX II 3D Exd IIA T5 Da\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 17,500\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 844 Ed. 13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficiency: 140 Lm\/W\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 1598\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 60,000+ Hours\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 137 Rev 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 5000K, 4000K, 3000K\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 250.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: \u0026gt;75 CRI\u003c\/td\u003e\n\u003ctd\u003eCertified to ATEX 94\/9\/EC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle: 60° or 125°\u003c\/td\u003e\n\u003ctd\u003eT5 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003ePaint Spray Booth Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Efficiency: \u0026gt;95%\u003c\/td\u003e\n\u003ctd\u003eIEC 60529 Tested\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor: 0.992\u003c\/td\u003e\n\u003ctd\u003eIP67 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range:-50° C to +65°C\u003c\/td\u003e\n\u003ctd\u003eLEL Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp Rating: T5\u003c\/td\u003e\n\u003ctd\u003eMultiple Driver Banks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Copper Free Cast Aluminum\u003c\/td\u003e\n\u003ctd\u003e80% Lumen Retention after 60,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: Hardened Borosilicate Glass\u003c\/td\u003e\n\u003ctd\u003eFactory Sealed Light Fixture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGasket Material: Silicone\u003c\/td\u003e\n\u003ctd\u003eRecommended 15` to 40` Mounting Height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Ceiling Mount Junction Box\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: (3) 3\/4\" NPT Hubs on Ceiling Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring Hub: 3\/4\" NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe Larson Electronics EPL-HB-125LED-RT-CM Ceiling Mount Explosion Proof High Bay light fixture provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older incandescent, metal halide and high pressure sodium lights.  \nThis Class 1 Division 1 \u0026amp; 2, Class 2 Division 1 \u0026amp; 2 explosion proof light fixture provides 17,500 of high quality light while drawing only 125 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 25px;\"\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e Click Photo to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 83px;\"\u003e\nThis explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twelve individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.\nUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied and emit light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.\nThis light is universal voltage capable and can be operated with 100-277 VAC, 50\/60Hz. We also offer a low voltage version of this LED fixture that operates on AC\/DC voltages from 11-25 Volts. This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics. \nThis LED light produces 17,500 lumens with a color temperature of 5000K and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. We also offer a 3000K warm white and 4000K natural white color temperature options (longer lead times may apply for non-standard temperatures). The EPL-HB-125LED-RT-CM offers several mounting options including ceiling mounting, pendant mounting, wall mounting and cable mounting. The standard version of this explosion proof LED fixture includes a flat surface ceiling mount with four 3\/4\" NPT entries. \n\n\u003ctable width=\"100%\" border=\"0\" cellpadding=\"2\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eHigh Quality Features\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 212px;\"\u003e\n1. Low power consumption.\n2. Instant on\/off operation.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. Superior color rendering compared to HPS, LPS, MH.\n5. Retains 80% lumen output after 60,000 operating hours.\n6. Powder coated aluminum fixture body. \n7. Ceiling mount included w\/ 3\/4\" knock outs\n8. Low profile - Light weight\n9. 17,500  Lumen output from 125 watts\n\u003c\/td\u003e\n\u003ctd\u003e\n1. 60,000 hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n 8. Qualifies buildings for LED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off €“ No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264265441461,"sku":"PL3-EPL-HB-125LED-RT-CM","price":3340.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-HB-125LED-RT-CM.jpg?v=1628397814"},{"product_id":"pl3-eplc2-hb-4x150led-rt","title":"600W Explosion Proof High Bay LED Light Fixture - C1D2 \/ C2D1 \/ C2D2 - Paint Spray Booth Approved - 70000 Lumens","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eEPLC2-HB-4X150LED-RT - C1D2 High Bay LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eListing: United States - Canada\u003c\/td\u003e\n\u003ctd\u003eListed for United States and Canada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: Cree LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass I, Division 2, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 30\"L x 30\"W x 16\"D\u003c\/td\u003e\n\u003ctd\u003eClass II, Divisions 1 \u0026amp; 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 130 lb\u003c\/td\u003e\n\u003ctd\u003eClass III, Divisions 1 \u0026amp; 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 100-277 Volts AC, 50\/60Hz or 11-25 Volts AC\/DC\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 844 Ed. 13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 600W\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 1598\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 70,000\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 137 Rev 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 116.67 Lm\/W\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 250.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 60,000+ Hours\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 30-M-1986 Rev 2012\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 5000K, 4500K or 3000K\u003c\/td\u003e\n\u003ctd\u003eT5 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: \u0026gt;75 CRI\u003c\/td\u003e\n\u003ctd\u003ePaint Spray Booth Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle: 60° or 125°\u003c\/td\u003e\n\u003ctd\u003eIEC 60529 Tested\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003eIP67 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Efficiency: \u0026gt;95%\u003c\/td\u003e\n\u003ctd\u003eLEL Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor: 0.992\u003c\/td\u003e\n\u003ctd\u003eMultiple Driver Banks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range: -50°C to +65°C\u003c\/td\u003e\n\u003ctd\u003e80% Lumen Retention after 60,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp Rating: T5\u003c\/td\u003e\n\u003ctd\u003eFactory Sealed Light Fixture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Copper Free Cast Aluminum\u003c\/td\u003e\n\u003ctd\u003eRecommended 15' to 40' Mounting Height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Finish: Epoxy Powder Coated - Grey\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: Hardened Borosilicate Glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGasket Material: Silicone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Swivel Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring Hub: 3\/4\" NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA\nThe EPLC2-HB-4X150LED-RT from Larson Electronics is an Explosion Proof High Bay Light Fixture that provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older fixtures. \n***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*** \nThis Class I Division 2, Class II Divisions 1 \u0026amp; 2 explosion proof light fixture provides 70,000 lumens of high quality light while drawing only 600 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nThe explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains forty-eight individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\n\n\u003ctable width=\"544\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd colspan=\"3\"\u003eClick Photos to Enlarge \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n \u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e60° Beam Angle \u003c\/td\u003e\n\u003ctd\u003e125° Beam Angle \u003c\/td\u003e\n\u003ctd\u003e140° Beam Angle \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nBeam Angles: When used as a fixed mount fixture, the varying beam angles need to be mounted at certain heights in order to achieve the greatest coverage and efficiency in both high bay and low bay lighting situations. The 60° beam should be mounted in high bay fixtures over 25' in height and 25' away from objects if used as a wall mounted light. The 125° beam is ideal for low bay fixtures in a height range of 15-25 feet and the same distance away from objects when the wall mounting option is employed. The 140° beam is best used as a low bay fixture in areas with a ceiling height of 15' or less or for illuminating objects up to 15' away when wall mounted.\nThis light is universal voltage capable and can be operated with 100-277 V AC, 50\/60Hz. We also offer a low voltage version of this LED fixture that operates on AC\/DC voltages from 11-25 Volts. This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics. \n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr align=\"center\"\u003e\n\u003ctd\u003eEnergy Consumption Comparison\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eMetal Halide\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eWattage\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1500 watts\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e600 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 120V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e13.50 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e5 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 220V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e7.37 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e2.73 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 240V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e6.75 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e2.5 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 277V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e5.85 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e2.17 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 12V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e135 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e50 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 24V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e67.50 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e25 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eLamp Life Expectancy\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e20,000 hours\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e50,000+ hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eOperation cost per year\n(12hs\/day @ 12c\/kWh)\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$851.48\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$315.36\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd style=\"width: 161px;\" colspan=\"3\"\u003eEach LED light fixture has the potential to save $500.00+ per year in electricity alone, not including maintenance costs, operational downtime, reduced productivity, HVAC loads, or carbon footprint. When retrofitting an entire facility with 100s of light fixtures, the return on investment of LED over metal halide becomes evident. \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nThis LED light produces 70,000 lumens with a color temperature of 5000K standard and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. We also offer a 3000K warm white and 4500K natural white color temperature options (longer lead times may apply for non-standard temperatures). The EPLC2-HB-4X150LED-RT offers several mounting options including ceiling mounting, pendant mounting, wall mounting and cable mounting. The standard version of this explosion proof LED fixture includes a pendant mount and a surface mount option.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264266457269,"sku":"PL3-EPLC2-HB-4X150LED-RT","price":15200.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPLC2-HB-4X150LED-RT.jpg?v=1628397712"},{"product_id":"pl3-epl-hb-4x150led-rt","title":"600W Explosion Proof High Bay LED Light Fixture - C1D1 - Paint Spray Booth Approved - 70000 Lumens","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eEPL-HB-4X150LED-RT - C1D1 High Bay LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eListing: United States - Canada\u003c\/td\u003e\n\u003ctd\u003eListed for United States and Canada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: Cree LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass I, Divisions 1 \u0026amp; 2, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 30\"L x 30\"W x 16\"D\u003c\/td\u003e\n\u003ctd\u003eClass II, Divisions 1 \u0026amp; 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 130 lbs\u003c\/td\u003e\n\u003ctd\u003eClass III, Divisions 1 \u0026amp; 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 100-277 Volts AC, 50\/60Hz or 11-25 Volts AC\/DC\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 844 Ed. 13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 600W\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 1598\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 70,000\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 137 Rev 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy:116.67 Lm\/W\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 250.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 60,000+ Hours\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 30-M-1986 Rev 2012\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 5000K, 4500K or 3000K\u003c\/td\u003e\n\u003ctd\u003eT5 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: \u0026gt;75 CRI\u003c\/td\u003e\n\u003ctd\u003ePaint Spray Booth Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle: 60° or 125°\u003c\/td\u003e\n\u003ctd\u003eIEC 60529 Tested\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003eIP67 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Efficiency: \u0026gt;95%\u003c\/td\u003e\n\u003ctd\u003eLEL Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor: 0.992\u003c\/td\u003e\n\u003ctd\u003eMultiple Driver Banks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range: -50°C to +65°C\u003c\/td\u003e\n\u003ctd\u003e80% Lumen Retention after 60,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp Rating: T5\u003c\/td\u003e\n\u003ctd\u003eFactory Sealed Light Fixture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Copper Free Cast Aluminum\u003c\/td\u003e\n\u003ctd\u003eRecommended 15` to 40` Mounting Height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Finish: Epoxy Powder Coated - Grey\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: Hardened Borosilicate Glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGasket Material: Silicone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Swivel Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring Hub: 3\/4\" NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA\nThe EPL-HB-4X150LED-RT from Larson Electronics is an Explosion Proof High Bay Light Fixture that provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older fixtures. \n***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*** \nThis Class I Divisions 1 \u0026amp; 2, Class II Divisions 1 \u0026amp; 2 explosion proof light fixture provides 70,000 lumens of high quality light while drawing only 600 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nThe explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains forty-eight individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\n\n\u003ctable width=\"544\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd colspan=\"3\"\u003eClick Photos to Enlarge \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e60° Beam Angle \u003c\/td\u003e\n\u003ctd\u003e125° Beam Angle \u003c\/td\u003e\n\u003ctd\u003e140° Beam Angle \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nBeam Angles: When used as a fixed mount fixture, the varying beam angles need to be mounted at certain heights in order to achieve the greatest coverage and efficiency in both high bay and low bay lighting situations. The 60° beam should be mounted in high bay fixtures over 25` in height and 25` away from objects if used as a wall mounted light. The 125° beam is ideal for low bay fixtures in a height range of 15-25 feet and the same distance away from objects when the wall mounting option is employed. The 140° beam is best used as a low bay fixture in areas with a ceiling height of 15` or less or for illuminating objects up to 15` away when wall mounted.\nThis light is universal voltage capable and can be operated with 100-277 VAC, 50\/60Hz. We also offer a low voltage version of this LED fixture that operates on AC\/DC voltages from 11-25 Volts. This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics. \n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr align=\"center\"\u003e\n\u003ctd\u003eEnergy Consumption Comparison\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eMetal Halide\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eWattage\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1500 watts\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e600 watts\u003c\/td\u003e\n \u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 120V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e13.50 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e5 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 220V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e7.37 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e2.73 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 240V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e6.75 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e2.5 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 277V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e5.85 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e2.17 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 12V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e135 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e50 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 24V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e67.50 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e25 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eLamp Life Expectancy\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e20,000 hours\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e50,000+ hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eOperation cost per year\n(12hs\/day @ 12c\/kWh)\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$851.48\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$315.36\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\" colspan=\"3\"\u003eEach LED light fixture has the potential to save $500.00+ per year in electricity alone, not including maintenance costs, operational downtime, reduced productivity, HVAC loads, or carbon footprint. When retrofitting an entire facility with 100s of light fixtures, the return on investment of LED over metal halide becomes evident. \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nThis LED light produces 70,000 lumens with a color temperature of 5000K standard and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. We also offer a 3000K warm white and 4500K natural white color temperature options (longer lead times may apply for non-standard temperatures). The EPL-HB-4X150LED-RT offers several mounting options including ceiling mounting, pendant mounting, wall mounting and cable mounting. The standard version of this explosion proof LED fixture includes a pendant mount and a surface mount option.\n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eHigh Quality Features\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 212px;\"\u003e\n1. Low power consumption.\n2. Instant on\/off operation.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. Superior color rendering compared to HPS, LPS, MH.\n5. Retains 80% lumen output after 60,000 operating hours.\n6. Powder coated aluminum fixture body. \n7. Pendant and Swivel Bracket mount included\n8. Low profile - Light weight\n9. 70,000 Lumen output from only 600 watts\n10. Multiple LED Driver Banks for Redundancy\n11. Paint Spray Booth Approved\n\u003c\/td\u003e\n\u003ctd\u003e\n1. 60,000 hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off - No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264266490037,"sku":"PL3-EPL-HB-4X150LED-RT","price":15712.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-HB-4X150LED-RT.jpg?v=1628397710"},{"product_id":"pl3-hald-24-1x50led-v3-dimm","title":"50W Explosion Proof 0-10V Dimmable LED Light- 2x2 Lay-In Troffer - C1D1\u00262 - Paint Spray Booth Rated","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eHALD-24-1X50LED-V3-DIMM HAZLOC Lay-In Panel Mount Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eListing: United States - Canada\u003c\/td\u003e\n\u003ctd\u003eListed for United States and Canada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: Cree LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass I, Divisions 1 \u0026amp; 2, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 23 3\/4\"-L x 23 3\/4\"-W x 8\"-D\u003c\/td\u003e\n\u003ctd\u003eClass II, Divisions 1 \u0026amp; 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlange Dimensions: 27\"-L x 29.5\"-W\u003c\/td\u003e\n\u003ctd\u003eClass II, Divisions 1 \u0026amp; 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 40 lbs\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 844 Ed. 13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 120-277 Volts AC, 50\/60Hz\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 1598\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 50W\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 137 Rev 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 7,000\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 250.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 140 Lm\/W\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 30-M-1986 Rev 2012\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 60,000+ Hours\u003c\/td\u003e\n\u003ctd\u003eT5 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 5000K, 4000K, 3000K\u003c\/td\u003e\n\u003ctd\u003ePaint Spray Booth Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: \u0026gt;75 CRI\u003c\/td\u003e\n\u003ctd\u003eIEC 60529 Tested\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle: 60° or 125°\u003c\/td\u003e\n\u003ctd\u003eIP67 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003eLEL Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Efficiency: \u0026gt;95%\u003c\/td\u003e\n\u003ctd\u003eMultiple Driver Banks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor: 0.992\u003c\/td\u003e\n\u003ctd\u003e80% Lumen Retention after 60,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range: -50°C to +65°C\u003c\/td\u003e\n\u003ctd\u003eFactory Sealed Light Fixture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp Rating: T5\u003c\/td\u003e\n\u003ctd\u003eRecessed Panel Mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Copper Free Cast Aluminum\u003c\/td\u003e\n\u003ctd\u003eExternal Driver Provides 0-10V Dimming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Finish: Powder Coated - White\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: 1\/8\" Polycarbonate\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Recessed Panel Mounting\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: 10` 16\/3 SOOW w\/ Flying Leads\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring Hub: 3\/4\" NPT\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Driver Specs\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage: 100-277 Volts AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Current: 1.8A Max\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor: \u0026gt;98%\u003c\/td\u003e\n\u003ctd\u003eToll Free: 1-800-369-6671\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficiency: \u0026gt;88%\u003c\/td\u003e\n\u003ctd\u003eIntl: 1-214-616-6180\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Voltage: 54V Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Current: 2.1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\nMade in the USA \nThe Larson Electronics HALD-24-1X50LED-V3-DIMM Hazardous Area Dimmable LED Light Fixture is designed to provide operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. This dimmable LED panel mount fixture is ETL listed Class I Divisions 1 \u0026amp; 2, Class II Divisions 1 \u0026amp; 2,and is approved for use within paint spray booths. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for paint booths and hazardous locations where flammable chemical\/petrochemical vapors are present.\n***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE***\nThe HALD-24-1X50LED-V3-DIMM Explosion Proof Dimmable fixture is a 2x2 Class I Divisions 1 \u0026amp; 2 hazardous location lay-in LED light fixture is ideal for use in paint spray booths and hazardous environments where space for lighting fixtures is limited. This fixture is T5 temperature rated and is a fully integrated LED unit. The LED assembly is protected by an aluminum framed, hinged, 3\/16\" thick polycarbonate door that provides direct front access to the internal components. The lamp housing is designed for recessed mounting, and is constructed of non-sparking aluminum coated with a powder coated white finish.\nThis Class I Divisions 1 \u0026amp; 2, Class II Divisions 1 \u0026amp; 2 explosion proof light fixture provides 7,000 lumens of high quality light while drawing only 50 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. A special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.\nThis LED light fixture features 0-10V dimming capabilities via an external driver. This gives operators the ability to manually adjust the brightness of the LED lamp quickly and easily. The 0-10V dimming allows for adjustments to fit the brightness needs of any lighting situation. A 0-10V dimmable light works through the use of a DC control signal that ranges between zero and ten volts. The basic idea is that at 10 volts of input the light is at its brightest level with 0 volts being the lowest possible dimness setting. The smooth, continuous and flicker-free dimming of a 0-10V dimmable LED light is ideal for a wide range of different lighting applications.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eBeam Angle of 125° or 60° are Available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e125° Beam Angle \u003c\/td\u003e\n\u003ctd\u003e60° Beam Angle \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nThe integrated LED assembly in this unit features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains eight individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\nThis light is universal voltage capable and can be operated with 120-277 VAC, 50\/60Hz without any need for a special ballast. The aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LED luminaries. The LED lamp produces 7,000 lumens with a color temperature of 5000K, 4000K, or 3000K and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nThis fixture is designed for recessed mounting and requires a mounting hole to be made in booth panels capable of accommodating the fixture housing in order to provide the maximum amount of space in paint spray booth enclosures. Once mounted, this fixture`s door frame will extend 3\/8\" into the spray booth.\nApplications: Paint spray booths and enclosed spaces where flammable chemical\/petrochemical vapors are present.\n\n\u003ctable cellpadding=\"2\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eHigh Quality Features\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1. Low power consumption.\n2. Fixture arrives assembled and lamped to reduce installation time and cost. \n3. Instant on\/off operation.\n4. Fixture constructed of welded corrosion resistant copper free aluminum alloy.\n5. 3\/4\" Wiring Hubs\n6. Superior color rendering compared to HPS, LPS, MH.\n7. Retains 80% lumen output after 60,000 operating hours.\n8. Powder coated aluminum fixture body. \n9. Low profile - Light weight \n10. 7,000 Lumen output from only 50 watts\n11. External driver provides 0-10V dimming capability.\u003c\/td\u003e\n\u003ctd\u003e1. 60,000 hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration) \n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off - No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264266522805,"sku":"PL3-HALD-24-1X50LED-V3-DIMM","price":4910.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-HALD-24-1X50LED-V3-DIMM.jpg?v=1629080038"},{"product_id":"pl3-hald-24-1x50led-dimm","title":"50W Explosion Proof 0-10V Dimmable LED Light- 2x2 Lay-In Troffer - C1D1\u00262 - Paint Spray Booth Rated","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eHALD-24-1X50LED-DIMM HAZLOC Lay-In Panel Mount Dimmable LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eListing: United States - Canada\u003c\/td\u003e\n\u003ctd\u003eListed for United States and Canada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: Cree LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass I, Divisions 1 \u0026amp; 2, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 23 3\/4\"-L x 23 3\/4\"-W x 8\"-D\u003c\/td\u003e\n\u003ctd\u003eClass II, Divisions 1 \u0026amp; 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlange Dimensions: 25 5\/8\"-L x 27 1\/2\"-W\u003c\/td\u003e\n\u003ctd\u003eClass II, Divisions 1 \u0026amp; 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 40lbs\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 844 Ed. 13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 100-277 Volts AC, 50\/60Hz or 11-25 Volts AC\/DC\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 1598\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 50W\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 137 Rev 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 7,000\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 250.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 140 Lm\/W\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 30-M-1986 Rev 2012\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 60,000+ Hours\u003c\/td\u003e\n\u003ctd\u003eT5 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 5000K, 4000K, 3000K\u003c\/td\u003e\n\u003ctd\u003ePaint Spray Booth Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: \u0026gt;75 CRI\u003c\/td\u003e\n\u003ctd\u003eIEC 60529 Tested\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle: 60° or 125°\u003c\/td\u003e\n\u003ctd\u003eIP67 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003eLEL Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Efficiency: \u0026gt;95%\u003c\/td\u003e\n\u003ctd\u003eMultiple Driver Banks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor: 0.992\u003c\/td\u003e\n\u003ctd\u003e80% Lumen Retention after 60,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range: -50°C to +65°C\u003c\/td\u003e\n\u003ctd\u003eFactory Sealed Light Fixture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp Rating: T5\u003c\/td\u003e\n\u003ctd\u003eRecessed Panel Mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Copper Free Cast Aluminum\u003c\/td\u003e\n\u003ctd\u003eExternal Driver Provides 0-10V Dimming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Finish: Powder Coated - White\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: 1\/8\" Polycarbonate\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Recessed Panel Mounting\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: 10` 16\/3 SOOW w\/ Flying Leads\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring Hub: 3\/4\" NPT\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Driver Specs\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage: 120-277 Volts AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Current: 1.8A Max\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor: \u0026gt;98%\u003c\/td\u003e\n\u003ctd\u003eToll Free: 1-800-369-6671\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficiency: \u0026gt;88%\u003c\/td\u003e\n\u003ctd\u003eIntl: 1-214-616-6180\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Voltage: 54V Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Current: 2.1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\nMade in the USA \nThe Larson Electronics HALD-24-1X50LED-DIMM Hazardous Area Dimmable LED Light Fixture is designed to provide operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. This dimmable LED panel mount fixture is ETL listed Class I Divisions 1 \u0026amp; 2, Class II Divisions 1 \u0026amp; 2,and is approved for use within paint spray booths. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for paint booths and hazardous locations where flammable chemical\/petrochemical vapors are present.\n***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE***\nThe HALD-24-1X50LED-DIMM Explosion Proof Dimmable fixture is a 2x2 Class I Divisions 1 \u0026amp; 2 hazardous location lay-in LED light fixture is ideal for use in paint spray booths and hazardous environments where space for lighting fixtures is limited. This fixture is T5 temperature rated and is a fully integrated LED unit. The LED assembly is protected by an aluminum framed, hinged, 3\/16\" thick polycarbonate door that provides direct front access to the internal components. The lamp housing is designed for recessed mounting, and is constructed of non-sparking aluminum coated with a powder coated white finish.\nThis Class I Divisions 1 \u0026amp; 2, Class II Divisions 1 \u0026amp; 2 explosion proof light fixture provides 7,000 lumens of high quality light while drawing only 50 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. A special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.\nThis LED light fixture features 0-10V dimming capabilities via an external driver. This gives operators the ability to manually adjust the brightness of the LED lamp quickly and easily. The 0-10V dimming allows for adjustments to fit the brightness needs of any lighting situation. A 0-10V dimmable light works through the use of a DC control signal that ranges between zero and ten volts. The basic idea is that at 10 volts of input the light is at its brightest level with 0 volts being the lowest possible dimness setting. The smooth, continuous and flicker-free dimming of a 0-10V dimmable LED light is ideal for a wide range of different lighting applications.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eBeam Angle of 125° or 60° are Available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e125° Beam Angle \u003c\/td\u003e\n\u003ctd\u003e60° Beam Angle \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nThe integrated LED assembly in this unit features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains eight individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\nThis light is multi-voltage capable and can be operated with 100-277 VAC, 50\/60Hz without any need for a special ballast. The aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LED luminaries. The LED lamp produces 7,000 lumens with a color temperature of 5000K, 4000K, or 3000K and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nThis fixture is designed for recessed mounting and requires a mounting hole to be made in booth panels capable of accommodating the fixture housing in order to provide the maximum amount of space in paint spray booth enclosures. Once mounted, this fixture`s door frame will extend 3\/8\" into the spray booth.\nApplications: Paint spray booths and enclosed spaces where flammable chemical\/petrochemical vapors are present.\n\n\u003ctable cellpadding=\"2\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eHigh Quality Features\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1. Low power consumption.\n2. Fixture arrives assembled and lamped to reduce installation time and cost. \n3. Instant on\/off operation.\n4. Fixture constructed of welded corrosion resistant copper free aluminum alloy.\n5. 3\/4\" Wiring Hubs\n6. Superior color rendering compared to HPS, LPS, MH.\n7. Retains 80% lumen output after 60,000 operating hours.\n8. Powder coated aluminum fixture body. \n9. Low profile - Light weight \n10. 7,000 Lumen output from only 50 watts\n11. External driver provides 0-10V dimming capability.\u003c\/td\u003e\n\u003ctd\u003e1. 60,000 hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration) \n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off - No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264266555573,"sku":"PL3-HALD-24-1X50LED-DIMM","price":4780.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-HALD-24-1X50LED-DIMM.jpg?v=1629080046"},{"product_id":"pl3-hald-12-1x50led-amb","title":"50W Explosion Proof LED Light - 1x1 Lay-In Troffer - C1D1\/2 - Amber - Paint Spray Booth Rated","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eHALD-12-1X50LED-AMB HAZLOC Lay-In Panel Mount Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eListing: United States - Canada\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass I, Divisions 1 \u0026amp; 2, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: Cree LED\u003c\/td\u003e\n\u003ctd\u003eClass II, Divisions 1 \u0026amp; 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 11-3\/4\"-L x 11-3\/4\"-W x 8\"-D\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 844 Ed. 13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlange Dimensions: 13-1\/2”-L x 13-1\/2\"-W\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 1598\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: -\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 137 Rev 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 100-277 Volts AC, 50\/60Hz or 11-25 Volts AC\/DC\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 250.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 50W\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 30-M-1986 Rev 2012\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 7,000 lms\u003c\/td\u003e\n\u003ctd\u003eT5 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 140 Lm\/W\u003c\/td\u003e\n\u003ctd\u003ePaint Spray Booth Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 60,000+ Hours\u003c\/td\u003e\n\u003ctd\u003eIEC 60529 Tested\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Color: Amber\u003c\/td\u003e\n\u003ctd\u003eIP67 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: -\u003c\/td\u003e\n\u003ctd\u003eLEL Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Type: -\u003c\/td\u003e\n\u003ctd\u003eMultiple Driver Banks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base: -\u003c\/td\u003e\n\u003ctd\u003e80% Lumen Retention after 60,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReplacement Lamp: -\u003c\/td\u003e\n\u003ctd\u003eFactory Sealed Light Fixture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle: 60° or 125°\u003c\/td\u003e\n\u003ctd\u003e1x1 Recessed Panel Mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Efficiency: \u0026gt;95%\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor: 0.992\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range:-50°C to +65°C\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp Rating: T5\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Copper Free Cast Aluminum\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Finish: Powder Coated - White\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: 1\/8\" Polycarbonate\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Recessed Panel Mounting\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: 10` 16\/3 SOOW w\/ Flying Leads\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring Hub: 3\/4\" NPT\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Driver Specs\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage: 100-277 Volts AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Current: 1.8A Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor: \u0026gt;98%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficiency: \u0026gt;88%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Voltage: 54V Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Current: 2.1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe Larson Electronics HALD-12-1X50LED-AMB Hazardous Area LED Light Fixture is designed to provide operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. This 1x1 LED panel mount fixture is ETL listed Class I, Divisions 1 \u0026amp; 2 and Class II, Divisions 1 \u0026amp; 2, and is approved for use within paint spray booths. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for paint booths and hazardous locations where flammable chemical\/petrochemical vapors are present.\n***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*** \nThe HALD-12-1X50LED-AMB is a 1x1 Class I, Division 1 \u0026amp; 2 lay-in LED light fixture that is ideal for use in paint spray booths and hazardous environments where space for lighting fixtures is limited. This fixture is T5 temperature rated and is a fully integrated LED unit. The LED assembly is protected by an aluminum framed, hinged, 3\/16\" thick polycarbonate door that provides direct front access to the internal components. The lamp housing is designed for recessed mounting, and is constructed of non-sparking aluminum coated with a powder coated white finish.\nThis Class I, Divisions 1 \u0026amp; 2 and Class II, Divisions 1 \u0026amp; 2 explosion proof light fixture provides 7,000 lumens of high-quality amber light while drawing only 50 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. A special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.\nThe integrated LED assembly in this unit features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains eight individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.\nUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.\nVoltage: This light is multi-voltage capable and can be operated with 100-277V AC, 50\/60Hz without any need for a special ballast. The aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LED luminaries. \nMounting: This 1x1 fixture is designed for recessed mounting and requires a mounting hole to be made in booth panels capable of accommodating the fixture housing in order to provide the maximum amount of space in paint spray booth enclosures. Once mounted, this fixture`s door frame will extend 3\/8” into the spray booth.\nApplications: Paint spray booths and enclosed spaces where flammable chemical\/petrochemical vapors are present.\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264266588341,"sku":"PL3-HALD-12-1X50LED-AMB","price":3834.0,"currency_code":"CAD","in_stock":true}]},{"product_id":"pl3-epl-hb-3x150led-rt-480v","title":"450W Explosion Proof High Bay LED Fixture - 480V - C1D1 - Paint Booth Approved - 52500 Lumens","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eEPL-HB-3X150LED-RT-480V High Bay LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eApprovals\/Ratings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: Cree LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass I Division 1, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 42\"L x 16\"W 5\"H\u003c\/td\u003e\n\u003ctd\u003eClass I Division 2, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 450W\u003c\/td\u003e\n\u003ctd\u003eClass II, Divisions 1 \u0026amp; 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 52,500 \u003c\/td\u003e\n\u003ctd\u003eClass III, Divisions 1 \u0026amp; 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficiency: 116.67 Lm\/W \u003c\/td\u003e\n\u003ctd\u003eT5 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 347-480V AC\u003c\/td\u003e\n\u003ctd\u003eCertified to UL844 and C22.2 Standards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: 3\/4\" Pendant and Swivel Mount \u003c\/td\u003e\n\u003ctd\u003ePaint Spray Booth Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 101 lbs\u003c\/td\u003e\n\u003ctd\u003eLEL Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle: 60° or 125° \u003c\/td\u003e\n\u003ctd\u003eIP67 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003eMultiple Driver Banks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp Rating: T5 -50°C to +65°C\u003c\/td\u003e\n\u003ctd\u003e80% Lumen Retention after 60,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 5000K, 4500K or 3000K\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: \u0026gt;75 CRI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 60,000+ Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA\nThe EPL-HB-3X150LED-RT-480V from Larson Electronics is a 450 Watt Explosion Proof High Bay Light Fixture that provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older fixtures. \n***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*** \nThis Class I Divisions 1 \u0026amp; 2, Class II Divisions 1 \u0026amp; 2 explosion proof light fixture provides 52,500 lumens of high quality light while drawing only 450 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.\nThis explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. The EPL-HB-3X150LED-RT-480V explosion proof high bay LED fixture contains thirty-six individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\n\n\u003ctable width=\"553\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd colspan=\"3\"\u003eClick Photos to Enlarge \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e60° Beam Angle \u003c\/td\u003e\n\u003ctd\u003e125° Beam Angle \u003c\/td\u003e\n\u003ctd\u003e140° Beam Angle \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nBeam Angles: When used as a fixed mount fixture, the varying beam angles need to be mounted at certain heights in order to achieve the greatest coverage and efficiency in both high bay and low bay lighting situations. The 60° beam should be mounted in high bay fixtures over 25` in height and 25` away from objects if used as a wall mounted light. The 125° beam is ideal for low bay fixtures in a height range of 15-25 feet and the same distance away from objects when the wall mounting option is employed. The 140° beam is best used as a low bay fixture in areas with a ceiling height of 15` or less or for illuminating objects up to 15` away when wall mounted.\nThis light is universal voltage capable and can be operated with 347-480 VAC without modifications. 347V is common in Western Canada, while 480V is common in the United States and Eastern Canada. This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics. \nThis LED light produces 52,500 lumens with a color temperature of 5000K, 4500K, or 3000K and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. The EPL-HB-3X150LED-RT-480V offers several mounting options including ceiling mounting, pendant mounting, wall mounting and cable mounting. The standard version of this explosion proof LED fixture includes a pendant mount and a surface mount option. \n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eHigh Quality Features\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 212px;\"\u003e\n1. Low power consumption.\n2. Instant on\/off operation.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. Superior color rendering compared to HPS, LPS, MH.\n5. Retains 80% lumen output after 60,000 operating hours.\n6. Powder coated aluminum fixture body. \n7. Pendant and Swivel Bracket mount included\n8. Low profile - Light weight\n9. 52,500 Lumen output from only 450 watts\n\u003c\/td\u003e\n \u003ctd\u003e\n1. 60,000 hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off - No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264266817717,"sku":"PL3-EPL-HB-3X150LED-RT-480V","price":13488.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-HB-3X150LED-RT-480V.jpg?v=1628397627"},{"product_id":"pl3-epl-hb-150led-rt-480v","title":"347\/480V Class 1 Division 1 Explosion Proof 150 Watt High Bay LED Light Fixture - Paint Spray Booths","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eEPL-HB-150LED-RT-480V - 347\/480V C1D1 High Bay LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: Cree LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass 1 Division 1 \u0026amp; 2, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 14\"H x 16\"W 5\"D\u003c\/td\u003e\n\u003ctd\u003eClass 2, Divisions 1 \u0026amp; 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 28lbs\u003c\/td\u003e\n\u003ctd\u003eClass 3, Divisions 1 \u0026amp; 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 150W\u003c\/td\u003e\n\u003ctd\u003eT5 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 21,000 \u003c\/td\u003e\n\u003ctd\u003eCertified to UL844 and C22.2 Standards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 140 Lm\/W\u003c\/td\u003e\n\u003ctd\u003ePaint Spray Booth Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 347-480V AC\u003c\/td\u003e\n\u003ctd\u003eLEL Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003eIP67 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNEMA Type (Lighting): 6H x 6V (60° Optics); 6H x 6V (125° Optics); 6H x 7V (140° Optics)\u003c\/td\u003e\n\u003ctd\u003eMultiple Driver Banks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIES Classification: Type I (60° Optics); Type VS (125° Optics); Type VS (140° Optics)\u003c\/td\u003e\n\u003ctd\u003e80% Lumen Retention after 60,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLongitudinal Classification: Very Short (60° Optics); Very Short (125° Optics); Short (140° Optics)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutoff Classification: Cutoff\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCIE Type: Direct\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBUG Rating: B5-U1-G1 (60° Optics); B4-U1-G1 (125° Optics); B4-U1-G2 (140° Optics)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemp Rating: T5 -50C to +65C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 5600K, 5000K, 4500K, 4000K, 3500K, 3000K, 2700K, or 6500K\u003c\/td\u003e\n\u003ctd\u003eToll Free: 1-800-369-6671\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: \u0026gt;75 CRI\u003c\/td\u003e\n\u003ctd\u003eIntl: 1-214-616-6180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 60,000+ Hours\u003c\/td\u003e\n\u003ctd\u003eFax: 1-903-498-3364\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting:3\/4€ Pendant and Swivel Mount are both included with this fixture.\u003c\/td\u003e\n\u003ctd\u003eE-mail: \n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe Larson Electronics EPL-HB-150LED-RT-480V Explosion Proof High Bay light fixture provides operators with a powerful and energy efficient 347-480V LED alternative to traditional hazardous location luminaries. This Class 1 Division 1 and Class 2 Division 1 LED high bay is universal voltage and natively runs on 347-480V AC without modifications. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older incandescent, metal halide and high pressure sodium lights.  \nThis Class 1 Division 1 \u0026amp; 2, Class 2 Division 1 \u0026amp; 2 explosion proof light fixture provides 21,000 of high quality light while drawing only 150 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 83px;\"\u003e\nThe explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twelve individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.\nUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.\nThis light is universal voltage capable and can be operated with 347-480 VAC without modifications. 347V is common in Western Canada, while 480V is common in the United States and Eastern Canada. This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics. \nThis LED light produces 21,000 lumens with a color temperature of 5000K, 4000K, or 3000K and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. The EPL-HB-150LED-RT-480V offers several mounting options including ceiling mounting, pendant mounting, wall mounting and cable mounting. The standard version of this explosion proof LED fixture includes a pendant mount and a surface mount option. \n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eHigh Quality Features\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 212px;\"\u003e\n1. Low power consumption.\n2. Instant on\/off operation.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. Superior color rendering compared to HPS, LPS, MH.\n5. Retains 80% lumen output after 60,000 operating hours.\n6. Powder coated aluminum fixture body. \n7. Pendant and Swivel Bracket mount included\n8. Low profile - Light weight\n9. 21,000 Lumen output from 150 watts\n10. 347\/480V Universal voltage without modifications \n \n \n\u003c\/td\u003e\n\u003ctd\u003e\n1. 60,000 hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off €“ No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264267014325,"sku":"PL3-EPL-HB-150LED-RT-480V","price":3436.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-HB-150LED-RT-480V.jpg?v=1628397573"},{"product_id":"pl3-epl-hb-2x150led-rt-480v","title":"300W Explosion Proof High Bay LED Light - C1D1 - Paint Booth Approved - 42,000 Lumens - 347-480V","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eEPL-HB-2X150LED-RT-480V - C1D1 High Bay LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: Cree LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eListed for United States and Canada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 27.85\"L x 16.07\"W x 16.76\"H\u003c\/td\u003e\n\u003ctd\u003eClass I, Divisions 1 \u0026amp; 2, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 67 lbs\u003c\/td\u003e\n\u003ctd\u003eClass II, Divisions 1 \u0026amp; 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 347-480V AC\u003c\/td\u003e\n\u003ctd\u003eClass III, Divisions 1 \u0026amp; 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 300W\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 844 Ed. 13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 42,000\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 1598\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 140 Lm\/W\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 137 Rev 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 60,000+ Hours\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 250.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 5000K, 4000K, 3000K\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 30-M-1986 Rev 2012\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: \u0026gt;75 CRI\u003c\/td\u003e\n\u003ctd\u003eT5 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle: 60° or 125°\u003c\/td\u003e\n\u003ctd\u003ePaint Spray Booth Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003eABS Type Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Efficiency: \u0026gt;95%\u003c\/td\u003e\n\u003ctd\u003eIEC 60529 Tested\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor:  0.992\u003c\/td\u003e\n\u003ctd\u003eIP67 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmp Draw: 2.5A @ 120V, 1.25A @ 240V, 1.08A @ 277V, 12.5A @ 24V\u003c\/td\u003e\n\u003ctd\u003eLEL Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range: -50° C to +85°C\u003c\/td\u003e\n\u003ctd\u003eMultiple Driver Banks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp Rating: T5\u003c\/td\u003e\n\u003ctd\u003e80% Lumen Retention after 60,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Copper Free Cast Aluminum\u003c\/td\u003e\n\u003ctd\u003eFactory Sealed Light Fixture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Finish: Epoxy Powder Coated - Grey\u003c\/td\u003e\n\u003ctd\u003eField Serviceable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: Hardened Borosilicate Glass\u003c\/td\u003e\n\u003ctd\u003eRecommended 15` to 40` Mounting Height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGasket Material: Silicone\u003c\/td\u003e\n\u003ctd\u003eMade in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Swivel Mount or Pendant Mount\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring Hub: 3\/4\" NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in Texas \nThe Larson Electronics EPL-HB-2X150LED-RT-480V Explosion Proof High Bay light fixture provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. This Class I Division 1 \u0026amp; 2 and Class II Division 1 \u0026amp; 2 LED fixture provides 42,000 lumens at 300 watts. Paint spray booth listed, this high output fixture is designed for installation in locations where flammable gases, vapors and liquids, combustible dusts, and\/or ignitable fibers and flyings exist or have the potential to exist. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older metal halide and high pressure sodium lights.\n***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*** \nThis Class I Divisions 1 \u0026amp; 2, Class II Divisions 1 \u0026amp; 2 explosion proof light fixture provides 42,000 of high quality light while drawing only 300 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.\nThis light is universal voltage capable and can be operated with 347-480V AC without modifications. 347V is common in Western Canada, while 480V is common in the United States and Eastern Canada. This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\nLED Drivers: Even in LED fixtures, heat is the single largest factor in premature light failure and color shifting. As a result, many manufacturers reduce the output of their LEDs in order to reduce the amount of heat produced. Rather than lower light output or quality, Larson Electronics addresses this problem with the addition of electronic LED drivers. These internal drivers provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. This not only reduces the energy dissipation, effectively lowering the operating temperature of the fixture, but also prevents AC over-voltage and short circuit loading making this fixture virtually maintenance free. Because the electronic drivers allow the EPL-HB-2X150LED-RT-480V to run at a cooler internal temperature and regulates the electrical current, energy efficiency and LED service hours are maximized while at the same time reducing operating costs and downtime incurred from the frequent servicing intervals required with other hotter running lights.\nThe explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. With the EPL-HB-2X150LED-RT-480V series of explosion proof lamps from Larson Electronics, each LED fixture contains twelve individual LED boards configured in a series of banks. Each bank contains two LED on a single board with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd colspan=\"3\"\u003eClick Photos to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e60° Beam Angle \u003c\/td\u003e\n\u003ctd\u003e125° Beam Angle \u003c\/td\u003e\n\u003ctd\u003e140° Beam Angle \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nBeam Angles: When used as a fixed mount fixture, the varying beam angles need to be mounted at certain heights in order to achieve the greatest coverage and efficiency in both high bay and low bay lighting situations. The 60° beam should be mounted in high bay fixtures over 25` in height and 25` away from objects if used as a wall mounted light. The 125° beam is ideal for low bay fixtures in a height range of 15-25 feet and the same distance away from objects when the wall mounting option is employed. The 140° beam is best used as a low bay fixture in areas with a ceiling height of 15` or less or for illuminating objects up to 15` away when wall mounted.\nEach LED light on this unit produces 21,000 lumens for a total of 42,000 lumens with a color temperature of 5000K standard and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. We also offer a 3000K warm white and 4000K natural white color temperature options (longer lead times may apply for non-standard temperatures). This lamp uses Cree LED units that have been chosen for their high lumen per watt ratio and extreme longevity. These Cree LEDs generate a robust 140 lumens per watt effective lumen output and have a 80% lumen retention at 60,000 hours, giving them better efficiency and operational life than traditional light sources.\nField Serviceability: This explosion proof LED light fixture is field serviceable. All major internal components can be purchased from Larson Electronics and installed by a licensed electrician with basic tools. With most explosion proof fixtures, the fixture must be returned to the manufacturer for repair work, which presents downtime and long turn around times for repair work. Larson Electronics addresses this issue with the EPL-HB-2X150LED-RT-480V series with field serviceability, allowing operators to perform service work without having to return the fixture to the manufacturer in the event of damage or failure.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr align=\"center\"\u003e\n\u003ctd\u003eEnergy Consumption Comparison\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eMetal Halide\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eWattage\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e800* watts\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e300 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 347V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e2.67 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.87 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 480V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.93 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.63 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eLamp Life Expectancy\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e20,000 hours\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e60,000+ hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eOperation cost per year\n(12hs\/day @ 12c\/kWh)\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$420.48\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$157.68\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 117px;\"\u003e*Includes ballast factor of 1.15 for metal halide\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\" colspan=\"3\"\u003eEach LED light fixture has the potential to save $260.00+ per year in electricity alone, not including maintenance costs, operational downtime, reduced productivity, HVAC loads, or carbon footprint. When retrofitting an entire facility with 100s of light fixtures, the return on investment of LED over metal halide becomes evident. \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nMounting: The EPL-HB-2X150LED-RT-480V offers several mounting options including ceiling mounting, pendant mounting, and wall mounting. Ceiling and wall applications are mounted using the adjustable swivel mount bracket found on the rear of the unit. Pendant applications are mounted from the ceiling and are suspended by rigid pipe via the 3\/4\" NPT hub on the back of the explosion proof fixture. Wiring is fed through rigid pipe to the junction box and tied in to the fixture€™s lead wires, completing the electrical connection.\nThis explosion proof LED light fixture is paint spray booth listed, IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics.\nSuggested Applications: The EPL-HB-2X150LED-RT-480V is approved for use within environments where flammable or combustible gases, vapors, dusts, fibers, and flying exist or stand the potential to exist, and is ideal for a wide variety of applications.\nApplications include but not limited to aircraft maintenance, alcohol processing, aerospace, chemical manufacturing, coke processing, cold storage, compressed natural gas (CNG) facilities, cranes, cryogenics, distilleries, food processing (with food grade gasketed polycarbonate lens: ), fuel storage, gas processing plants, grain processing, laboratories, liquefied natural gas (LNG) facilities, liquid propane gas (LPG), manufacturing, marine vessels, methane production, mining, offshore, oil drilling rigs, oil refineries, paint spray booths, paper processing, petrochemical, pharmaceuticals, power plants, production refineries, sand blast cabinets, sewage and septic tanks, shipyards, solvent and cleaning areas, storage facilities, tank farms, tankers, textile, washdown areas, waste treatment plants, and woodworking. .\n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eHigh Quality Features\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 212px;\"\u003e\n1. Low power consumption.\n2. Instant on\/off operation.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. Superior color rendering compared to HPS, LPS, MH.\n5. Retains 80% lumen output after 60,000 operating hours.\n6. Powder coated aluminum fixture body. \n7. Pendant and Swivel Bracket mount included\n8. Low profile - Light weight\n9. 42,000 Lumen output from only 300 watts\n10. Multiple LED Driver Banks for Redundancy\n11. Paint Spray Booth Approved\n\u003c\/td\u003e\n\u003ctd\u003e\n1. 60,000 hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off - No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264267178165,"sku":"PL3-EPL-HB-2X150LED-RT-480V","price":9508.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-HB-2X150LED-RT-480V.jpg?v=1628397545"},{"product_id":"pl3-epl-emg-hb-2x150led-rt","title":"300W Explosion Proof High Bay LED Fixture w\/ Emergency Backup - C1D1 - Paint Spray Booth Approved","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eEPL-EMG-HB-2X150LED-RT - C1D1 High Bay LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: Cree LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eListed for United States and Canada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 27.85\"L x 16.07\"W x 16.76\"H\u003c\/td\u003e\n\u003ctd\u003eClass I, Divisions 1 \u0026amp; 2, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 67 lbs\u003c\/td\u003e\n\u003ctd\u003eClass II, Divisions 1 \u0026amp; 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 100-277 Volts AC, 50\/60Hz, 11-25 Volts AC\/DC, 18-48V AC\/DC, 347-480V high voltage, 125-250V DC, and 0-10V dimmable\u003c\/td\u003e\n\u003ctd\u003eClass III\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 300W\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 844 Ed. 13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 35,000\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 1598\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 116.67 Lm\/W\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 137 Rev 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 60,000+ Hours\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 250.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 5000K, 4000K, 3000K\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 30-M-1986 Rev 2012\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: \u0026gt;75 CRI\u003c\/td\u003e\n\u003ctd\u003eT5 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle: 60° or 125°\u003c\/td\u003e\n\u003ctd\u003ePaint Spray Booth Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003eABS Type Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Efficiency: \u0026gt;95%\u003c\/td\u003e\n\u003ctd\u003eIEC 60529 Tested\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor:  0.992\u003c\/td\u003e\n\u003ctd\u003eIP67 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmp Draw: 2.5A @ 120V, 1.25A @ 240V, 1.08A @ 277V, 12.5A @ 24V\u003c\/td\u003e\n\u003ctd\u003eLEL Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery Backup: 90 Minutes\u003c\/td\u003e\n\u003ctd\u003eMultiple Driver Banks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery Backup Watts: 150W\u003c\/td\u003e\n\u003ctd\u003e80% Lumen Retention after 60,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery Backup Lumens: 17,500 lms\u003c\/td\u003e\n\u003ctd\u003eFactory Sealed Light Fixture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range: -50° C to +85°C\u003c\/td\u003e\n\u003ctd\u003eField Serviceable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Copper Free Cast Aluminum\u003c\/td\u003e\n\u003ctd\u003eRecommended 15` to 40` Mounting Height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Finish: Epoxy Powder Coated - Grey\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: Hardened Borosilicate Glass\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGasket Material: Silicone\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Swivel Mount or Pendant Mount\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring Hub: 3\/4\" NPT\u003c\/td\u003e\n\u003ctd\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Driver Specs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage: 100-277 Volts AC\u003c\/td\u003e\n\u003ctd\u003eToll Free: 1-800-369-6671\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Current: 3.6A Max\u003c\/td\u003e\n\u003ctd\u003eIntl: 1-214-616-6180\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Voltage: 54V Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Current: 4.2A\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe Larson Electronics EPL-EMG-HB-2X150LED-RT Explosion Proof High Bay LED Fixture w\/ Emergency Backup provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. This Class I Division 1 \u0026amp; 2 and Class II Division 1 \u0026amp; 2 LED fixture provides 35,000 lumens at 300 watts. Paint spray booth listed, this high output fixture is designed for installation in locations where flammable gases, vapors and liquids, combustible dusts, and\/or ignitable fibers and flyings exist or have the potential to exist. Equipped with a 90-minute emergency backup feature, Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older metal halide and high pressure sodium lights.\n***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*** \nThis Class I Division 1 \u0026amp; 2, Class II Division 1 \u0026amp; 2 explosion proof light fixture provides 35,000 of high quality light while drawing only 300 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.\nEmergency Backup: This LED light contains a battery backup unit that adds emergency light functionality to the fixture. With an integrated emergency ballast, this explosion proof LED light will continue to operate one LED lamp for 90 minutes at 17,500 lumens and 150 watts after the main electrical power to the light is severed. Once standard electrical power is restored, the emergency battery pack will be recharged. The battery backup unit includes a switched leg for turning the light fixture on\/off without kicking the unit into emergency mode.\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n \u003ctd\u003eClick Photo to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\nLED Drivers: Even in LED fixtures, heat is the single largest factor in premature light failure and color shifting. As a result, many manufacturers reduce the output of their LEDs in order to reduce the amount of heat produced. Rather than lower light output or quality, Larson Electronics addresses this problem with the addition of electronic LED drivers. These internal drivers provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. This not only reduces the energy dissipation, effectively lowering the operating temperature of the fixture, but also prevents AC over-voltage and short circuit loading making this fixture virtually maintenance free. Because the electronic drivers allow the EPL-EMG-HB-2X150LED-RT to run at a cooler internal temperature and regulates the electrical current, energy efficiency and LED service hours are maximized while at the same time reducing operating costs and downtime incurred from the frequent servicing intervals required with other hotter running lights.\nThe explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. With the EPL-EMG-HB-2X150LED-RT series of explosion proof lamps from Larson Electronics, each LED fixture contains twelve individual LED boards configured in a series of banks. Each bank contains two LED on a single board with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n \n\u003ctr\u003e\n\u003ctd colspan=\"3\"\u003eClick Photos to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e60° Beam Angle \u003c\/td\u003e\n\u003ctd\u003e125° Beam Angle Plug \u003c\/td\u003e\n\u003ctd\u003e140° Beam Angle Plug \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nBeam Angles: When used as a fixed mount fixture, the varying beam angles need to be mounted at certain heights in order to achieve the greatest coverage and efficiency in both high bay and low bay lighting situations. The 60° beam should be mounted in high bay fixtures over 25` in height and 25` away from objects if used as a wall mounted light. The 125° beam is ideal for low bay fixtures in a height range of 15-25 feet and the same distance away from objects when the wall mounting option is employed. The 140° beam is best used as a low bay fixture in areas with a ceiling height of 15` or less or for illuminating objects up to 15` away when wall mounted.\nEach LED light on this unit produces 17,500 lumens for a total of 35,000 lumens with a color temperature of 5000K standard and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. We also offer a 3000K warm white and 4000K natural white color temperature options (longer lead times may apply for non-standard temperatures). This lamp uses Cree LED units that have been chosen for their high lumen per watt ratio and extreme longevity. These Cree LEDs generate a robust 116.67 lumens per watt effective lumen output and have a 80% lumen retention at 60,000 hours, giving them better efficiency and operational life than traditional light sources.\nField Serviceability: This explosion proof LED light fixture is field serviceable. All major internal components can be purchased from Larson Electronics and installed by a licensed electrician with basic tools. With most explosion proof fixtures, the fixture must be returned to the manufacturer for repair work, which presents downtime and long turn around times for repair work. Larson Electronics addresses this issue with the EPL-EMG-HB-2X150LED-RT series with field serviceability, allowing operators to perform service work without having to return the fixture to the manufacturer in the event of damage or failure.\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr align=\"center\"\u003e\n\u003ctd\u003eEnergy Consumption Comparison\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eMetal Halide\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eWattage\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e800* watts\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e300 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 120V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e7.67 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e2.5 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 220V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e4.19 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.37 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 240V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e3.84 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.25 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 277V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e3.33 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.08 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 12V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e66.67 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e25 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n \u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 24V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e38.34 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e12.5 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eLamp Life Expectancy\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e20,000 hours\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e60,000+ hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eOperation cost per year\n(12hs\/day @ 12c\/kWh)\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$483.56\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$157.68\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 117px;\"\u003e*Includes ballast factor of 1.15 for metal halide\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\" colspan=\"3\"\u003eEach LED light fixture has the potential to save $325.00+ per year in electricity alone, not including maintenance costs, operational downtime, reduced productivity, HVAC loads, or carbon footprint. When retrofitting an entire facility with 100s of light fixtures, the return on investment of LED over metal halide becomes evident. \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nVoltage: This light is universal voltage capable and can be operated with 100-277V AC, 50\/60 Hz without modifications to the fixture, and a low voltage version of this LED fixture that operates on AC\/DC voltages from 11-25 volts for rigs and vision systems. 18-48V AC\/DC voltages are available for network systems and marine vessels. We also offer an additional 347-480V high voltage, 125-250V DC, and 0-10V dimmable versions of this explosion proof LED light fixture. \nMounting: The EPL-EMG-HB-2X150LED-RT offers several mounting options including ceiling mounting, pendant mounting, and wall mounting. Ceiling and wall applications are mounted using the adjustable swivel mount bracket found on the rear of the unit. Pendant applications are mounted from the ceiling and are suspended by rigid pipe via the 3\/4\" NPT hub on the back of the explosion proof fixture. Wiring is fed through rigid pipe to the junction box and tied in to the fixture€™s lead wires, completing the electrical connection.\nThis explosion proof LED light fixture is paint spray booth listed, IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics.\nSuggested Applications: The EPL-EMG-HB-2X150LED-RT is approved for use within environments where flammable or combustible gases, vapors, dusts, fibers, and flying exist or stand the potential to exist, and is ideal for a wide variety of applications.\nApplications include but not limited to aircraft maintenance, alcohol processing, aerospace, chemical manufacturing, coke processing, cold storage, compressed natural gas (CNG) facilities, cranes, cryogenics, distilleries, food processing (with food grade gasketed polycarbonate lens: ), fuel storage, gas processing plants, grain processing, laboratories, liquefied natural gas (LNG) facilities, liquid propane gas (LPG), manufacturing, marine vessels, methane production, mining, offshore, oil drilling rigs, oil refineries, paint spray booths, paper processing, petrochemical, pharmaceuticals, power plants, production refineries, sand blast cabinets, sewage and septic tanks, shipyards, solvent and cleaning areas, storage facilities, tank farms, tankers, textile, washdown areas, waste treatment plants, and woodworking. \n.\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264267210933,"sku":"PL3-EPL-EMG-HB-2X150LED-RT","price":14108.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-EMG-HB-2X150LED-RT.jpg?v=1628397539"},{"product_id":"pl3-epl-emg-48-4l-bx","title":"Explosion Proof Fluorescent Light w\/ Emergency Battery Backup - 4' 8 Biaxial Lamp - Paint Booth","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eEPL-EMG-48-4L-BX Explosion Proof Biaxial Failsafe Emergncy Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eNRTL Listed for United States \u0026amp; Canada\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass I Division 1, Groups C and D T6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Type: Biaxial Compact Fluorescent\u003c\/td\u003e\n\u003ctd\u003eClass I Division 2, Group A,B,C,D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 52\"-L x 22.50\"-W x 8.5\"-H\u003c\/td\u003e\n\u003ctd\u003eClass II, Division 1 \u0026amp; 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 130 Lbs\u003c\/td\u003e\n\u003ctd\u003eNRTL Certified to UL 595 Marine Type (Saltwater)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: Universal 120-277VAC 50\/60 Hz\u003c\/td\u003e\n\u003ctd\u003eNRTL Certified to UL 844, UL 924\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Wattsage 56 watts \u003c\/td\u003e\n\u003ctd\u003eNRTL Certified to UL 1598 Marine Type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 28,000\u003c\/td\u003e\n\u003ctd\u003eCertified Canadian Standards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens per Lamp: 3,500\u003c\/td\u003e\n\u003ctd\u003eListed for Paint Spray Booths\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 87.5 Lm\/W\u003c\/td\u003e\n\u003ctd\u003eCalifornia Title 24 Compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life Expectancy: 22,500 Hours\u003c\/td\u003e\n\u003ctd\u003eIP67 Rated - Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 4000K\u003c\/td\u003e\n\u003ctd\u003eT6 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eColor Rendering Index: 82\u003c\/td\u003e\n\u003ctd\u003eNEMA 4X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eBeam Angle: 150°\u003c\/td\u003e\n\u003ctd\u003eApproved for Confined Spares\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eAmbient Operating Temp Range:0° C to +50°C\u003c\/td\u003e\n\u003ctd\u003eApproved for Confined Spares\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eOperating Temp Range: T6 Rated \u003c\/td\u003e\n\u003ctd\u003eFactory Sealed Fixture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMinimum Operating Temp: -30° C\u003c\/td\u003e\n\u003ctd\u003eFailsafe Lighting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMaximum Case Temp: 90° C\u003c\/td\u003e\n\u003ctd\u003eEmergency Battery Backup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eBattery AC Input Voltage: 120\/277V AC 60Hz\u003c\/td\u003e\n\u003ctd\u003eSwitch Leg for Powering Light On\/Off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eBattery AC Input Current: 90 mA\u003c\/td\u003e\n\u003ctd\u003e90+ Minute Runtime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eBattery AC Input Current: 90 mA\u003c\/td\u003e\n\u003ctd\u003eMade in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eBattery Output Current: 120V @ 165mA - 277V @ 72mA\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eIllumination Time: 90+ Minutes\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eBattery Type: High Temp, Maintenance Free, Nickel Cadmium\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eBattery Lifespan: 7 to 10 Years\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eBattery Charge Current: 250 mA\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eBattery Recharge Time: 24 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eHousing Material: Cast Aluminum End Caps, Aluminum Reflectors - Copper Free\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLens Material: Hardened Borosilicate Glass Tubes\u003c\/td\u003e\n\u003ctd\u003eToll Free: 1-800-369-6671\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eGasket Material: Buna Rubber O-Rings\u003c\/td\u003e\n\u003ctd\u003eIntl: 1-214-616-6180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting: Unistrut Surface Mount - Pendant Mount Optional \u003c\/td\u003e\n\u003ctd\u003eFax: 1-903-498-3364\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWiring Hub: 1\/2\" NPT\u003c\/td\u003e\n\u003ctd\u003eE-mail: \n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA\nThe Larson Electronics EPL-EMG-48-4L-BX Explosion Proof, Paint Booth Approved, Fluorescent Light Fixture with Emergency Battery Backup is NRTL Listed for United States and Canada Class 1 Division 1, Class 1 Division 2 and ideal for hazardous locations where flammable petrochemical vapor or combustible dust exists or has the potential to exist. \n\u003cdiv style=\"text-align: center;\"\u003e\u003c\/div\u003e\n***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*** \nThe EPL-EMG-48-4L-BX is our 4 foot long, 4 lamp style, Class 1 Division 1 and Class 2 Division 1 \u0026amp; 2 explosion proof fluorescent light which is equipped with an added battery backup providing 90 minutes of emergency runtime. This T6 temperature rated fixture comes standard with eight Bi-Axial 40 watt compact fluorescent bulbs which produce a combined 160 watts and 28,000 lumens of illumination. This fixture is multi-voltage capable and provides operators in hazardous locations with a reliable and durable lighting solution that provides explosion proof protection along with the security of emergency battery backup.\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 119px;\"\u003e\n\u003ctable height=\"140\" width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%; height: 113px;\"\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 31%;\"\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 36%;\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 765px;\"\u003e\nThis fluorescent light works, mounts and is wired like our EPL-48-4L-BX explosion proof fluorescent light fixtures. The main difference is that we attach an extra Bodine ballast box to the unit that adds the emergency light functionality to the fixture. This explosion proof emergency light will run the standard 90 minutes after power is lost. The light recharges the battery once standard electrical power is restored. Standard configuration includes a single emergency ballast that will run a single lamp at 3500 lumens for 90 minutes. For an additional charge, a second ballast can be added to run a second lamp for 7000 total lumens output for 90 minutes. The battery backup unit includes a switched leg for turning the light fixture on\/off without kicking the unit into emergency mode.\nMounting: Standard end mounting via Unistrut. The Unistrut is attached to our standard L-bracket mounts. These L-bracket mounts can be adjusted to create angle mounts. As illustrated in the photos above, the series of mounting holes at the top of the bracket enable this explosion proof LED light to be attached to any wall, ceiling or floor surface. A simple through bolt can be used to secure the light to the surface. A single junction box at one end of the light is provided for the electrical connection.\nSuspension Mounting: Pendant mount fixtures hang from the ceiling and are suspended by rigid pipe. Each fixture features a 1\/2” NPT junction box on one end, and a 1\/2” NPT bracket on the other end of the fixture. Operators bring rigid pipe down to the threaded mounting hubs. Wiring is fed down through the rigid pipe to the junction box and tied in to the fixture’s lead wires, completing the electrical connection. The threaded mounting bracket provides support for the opposite end of the fixture. \nSuggested Applications: Paint spray booths, aircraft maintenance, oil drilling rigs, refineries, solvent and cleaning areas, gas processing plants, chemical manufacturing, waste treatment plants, gas processing plants.\n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eMade in USA Quality\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eLamp Options\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 130px;\"\u003e\n1. Each unit dialectically tested.\n2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture, where other models may only offer one or three choices.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. Over-sized, finned ballast housing for 800 mA fixtures provides more heat dissipation and extends ballast life. Larger ballast box accommodates High Output lamp ballasts. Ballast housing easily accessible and externally mounted. Top and bottom covers secured with nuts and bolts, instead of threaded through holes, which can be damaged with dirt.\n5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.\n6. A wrench is used to unscrew the end caps for relamping the fixture, while other models require the “tap and knock off” method to loosen the end cap.\n7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp protection.\n8. Spring loaded sockets on both ends hold lamps firmly for maximum shock and vibration protection.\n\u003c\/td\u003e\n\u003ctd\u003e\nF40BX\/840 – 40 watt, 3500 lumens per bulb, 22,500 hours life, 4000 Kelvin color (Suffix –BX)\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264270258357,"sku":"PL3-EPL-EMG-48-4L-BX","price":6928.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-EMG-48-4L-BX_b761a719-cb2f-4147-bf61-3455ef0c9bbf.jpg?v=1628372374"},{"product_id":"pl3-epl-emg-48-4l","title":"Explosion Proof Fluorescent Light w\/ Emergency Battery Backup- 4' 4 Lamp- Paint Spray Booth Approved","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eEPL-EMG-48-4L Explosion Proof Fluorescent Light Fixture w\/ Emergency Battery Backup\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eNRTL Listed for United States \u0026amp; Canada\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass I Division 1, Groups C and D; T6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 22.50\"W x 52\"L x 8.5\"H\u003c\/td\u003e\n\u003ctd\u003eClass I Division 2, Group A,B,C,D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 130 Lbs \u003c\/td\u003e\n\u003ctd\u003eClass II, Division 1 \u0026amp; 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: Multi-Voltage - 120-277V AC, 50\/60 Hz\u003c\/td\u003e\n\u003ctd\u003eNRTL Certified to UL 595 Marine Type (Saltwater)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 128W\u003c\/td\u003e\n\u003ctd\u003eNRTL Certified to UL 844\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 11,800\u003c\/td\u003e\n\u003ctd\u003eNRTL Certified to UL 1598 Marine Type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life Expectancy (Hrs): 24,000\u003c\/td\u003e\n\u003ctd\u003eCertified Canadian Standards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 92.19 Lm\/W\u003c\/td\u003e\n\u003ctd\u003eListed for Paint Spray Booths\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eColor Temp: 4100K\u003c\/td\u003e\n\u003ctd\u003eABS Certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eBeam Angle: 150°\u003c\/td\u003e\n\u003ctd\u003eCalifornia Title 24 Compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eAmbient Operating Temp Range: -20°C to +70°C \u003c\/td\u003e\n\u003ctd\u003eIP67 Rated - Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eOperating Temp Rating: T6 Rated\u003c\/td\u003e\n\u003ctd\u003eT6 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMinimum Operating Temp: -30°C\u003c\/td\u003e\n\u003ctd\u003eNEMA 4X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMaximum Case Temp: +90°C\u003c\/td\u003e\n\u003ctd\u003eApproved for Confined Spares\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eHousing Material: Cast Aluminum End Caps, Aluminum Reflectors - Copper Free\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLens Material: Hardened Borosilicate Glass Tubes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eGasket Material: Buna Rubber O-Rings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting: Surface Standard - Pendant Optional\u003c\/td\u003e\n\u003ctd\u003eToll Free: 1-800-369-6671\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring Hub: 1\/2\" NPT\u003c\/td\u003e\n\u003ctd\u003eIntl: 1-214-616-6180\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e*Temperatures above +65°C will diminish ballast life from 5 years to 3 years\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA\nThe EPL-EMG-48-4L from Larson Electronics is an Explosion Proof, Paint Booth Approved, Fluorescent Light Fixture with Emergency Battery Backup that is NRTL Listed for United States and Canada Class I Divisions 1 \u0026amp; 2 and Class II Divisions 1 \u0026amp; 2 and is ideal for hazardous locations where flammable petrochemical vapor or combustible dust exists or has the potential to exist. The unit carries a T6 temperature rating and comes standard with four fluorescent lamps.\n\u003cdiv style=\"text-align: center;\"\u003e\u003c\/div\u003e\n***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*** \nThe EPL-EMG-48-4L is our 4 foot long, 4 lamp, Class I Divisions 1 \u0026amp; 2 and Class II Divisions 1 \u0026amp; 2 explosion proof fluorescent light which is equipped with an added battery backup providing 90 minutes of emergency runtime. This T6 temperature rated fixture comes standard with four T8 fluorescent lamps which produce a combined 11,800 lumens of light. The lamps are protected by heat and impact resistant Pyrex tubes and the fixture is constructed of copper free aluminum alloy. The lamp reflectors are corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This fixture is multi-voltage capable and provides operators in hazardous locations with a reliable and durable lighting solution that provides explosion proof protection along with the security of emergency battery backup.\n\n\u003ctable height=\"140\" width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%; height: 113px;\"\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 31%;\"\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 36%;\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nThis emergency backup LED light works, mounts and is wired like our EPL-48-2L explosion proof LED light fixtures. The main difference is that we add a battery backup unit that adds emergency light functionality to the fixture. With an integrated emergency ballast, this explosion proof LED light will continue to operate one LED lamp for 90 minutes at 3,500 lumens after the main electrical power to the light is severed. Once standard electrical power is restored, the emergency battery pack will be recharged. The battery backup unit includes a switched leg for turning the light fixture on\/off without kicking the unit into emergency mode as well as a test switch for checking operation.\nMounting options: Standard end mounting via Unistruts. The Unistrut is attached to our standard L-bracket mounts. These L-bracket mounts can be adjusted to create angle mounts. As illustrated in the photos above, the series of mounting holes at the top of the bracket enable this explosion proof light to be attached to any wall, ceiling or floor surface. A simple through bolt can be used to secure the light to the surface. A single junction box at one end of the light is provided for the electrical connection.\nSuggested Applications: Paint spray booths, Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Gas processing plants, Chemical manufacturing, Waste treatment plants, Gas processing plants.\n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eMade in USA Quality\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eLamp Options\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 130px;\"\u003e\n1. Each unit dialectically tested.\n2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture, where other models may only offer one or three choices.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. Over-sized, finned ballast housing for 800 mA fixtures provides more heat dissipation and extends ballast life. Larger ballast box accommodates High Output lamp ballasts. Ballast housing easily accessible and externally mounted. Top and bottom covers secured with nuts and bolts, instead of threaded through holes, which can be damaged with dirt.\n5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.\n6. A wrench is used to unscrew the end caps for relamping the fixture, while other models require the \"tap and knock off\" method to loosen the end cap.\n7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp protection.\n8. Spring loaded sockets on both ends hold lamps firmly for maximum shock and vibration protection.\n\u003c\/td\u003e\n\u003ctd\u003e\nF32-T8\/841 - 32 watt, 2950 lumens per bulb, 24,000 hours life, 4100 Kelvin color (Suffix -T8)\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264270291125,"sku":"PL3-EPL-EMG-48-4L","price":5588.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-EMG-48-4L_906d9e8d-e8f4-4843-8d84-4c90a5d6f117.jpg?v=1628372370"},{"product_id":"pl3-epl-hb-30led-rt-uva","title":"30W C1D1 Explosion Proof High Bay LED UV Light Fixture - Paint Spray Booth Approved - 10,500 mW","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eEPL-HB-30LED-RT-UVA - C1D1 High Bay LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eListing: United States - Canada\u003c\/td\u003e\n\u003ctd\u003eListed for United States and Canada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass I, Divisions 1 \u0026amp; 2, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 7.04\"L x 7.04\"H x 5.72\"D\u003c\/td\u003e\n\u003ctd\u003eClass II, Divisions 1 \u0026amp; 2, Groups E, F and G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 7 lbs\u003c\/td\u003e\n\u003ctd\u003eClass III, Divisions 1 \u0026amp; 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 100-277 Volts AC, 50\/60Hz or 11-25 Volts AC\/DC\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 844 Ed. 13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 30W\u003c\/td\u003e\n\u003ctd\u003eCertified to UL 1598\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Intensity: 10,500 mW\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 137 Rev 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficiency: 350 mW\/W\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 250.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 50,000+ Hours\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 30-M-1986 Rev 2012\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWavelength Curve: 350-400NM - Peak @ 365NM\u003c\/td\u003e\n\u003ctd\u003eT5 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor: Ultraviolet- 365NM\u003c\/td\u003e\n\u003ctd\u003ePaint Spray Booth Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle: 120°\u003c\/td\u003e\n\u003ctd\u003eIEC 60529 Tested\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003eIP67 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Efficiency: \u0026gt;95%\u003c\/td\u003e\n\u003ctd\u003eLEL Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor: 0.992\u003c\/td\u003e\n\u003ctd\u003eSingle LED Driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range: -50°C to +65°C\u003c\/td\u003e\n\u003ctd\u003e80% Intensity Retention After 50,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n \u003ctd\u003eOperating Temp Rating: T5\u003c\/td\u003e\n\u003ctd\u003eFactory Sealed Light Fixture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Copper Free Cast Aluminum\u003c\/td\u003e\n\u003ctd\u003eRecommended 15` to 40` Mounting Height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Finish: Epoxy Powder Coated - Grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: Hardened Borosilicate Glass\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGasket Material: Silicone\u003c\/td\u003e\n\u003ctd\u003eToll Free: 1-800-369-6671\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: 3\/4\" Pendant\u003c\/td\u003e\n\u003ctd\u003eIntl: 1-214-616-6180\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: 10` 16\/3 SOOW w\/ Flying Leads\u003c\/td\u003e\n\u003ctd\u003eFax: 1-903-498-3364\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring Hubs: (4) 3\/4\" NPT Threaded Hubs\u003c\/td\u003e\n\u003ctd\u003eE-mail: \n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe EPL-HB-30LED-RT-UVA from Larson Electronics is an Explosion Proof High Bay UV LED Light Fixture that provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older incandescent, metal halide and high pressure sodium lights.\nThis Class I Division 1 \u0026amp; 2, Class II Division 1 \u0026amp; 2 explosion proof light fixture provides 10,500 mW of high quality ultraviolet light while drawing only 30 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 50,000 hour rated lifespan with 80% intensity retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install. The EPL-HB-30LED-RT-UVA explosion proof high bay LED UV light also offers operators convenience in the form of field serviceability. The EPL-HB-30LED-RT-UVA is typically used for curing coatings or adhesives and for non-destructive testing applications. This fixture has been thoroughly tested with the DuPont line of ultraviolet curable paint and primers, accelerating the cure times over metal halide fixtures with surface temperatures as low at 55°F.\nThe EPL-HB-30LED-RT-UVA uses ultraviolet LED light technology, a technology that is far better in energy saving than traditional fluorescent bulbs used for the same purposes. Traditional ultraviolet lights require a coating to block out visible light or a special composition of gases and chemicals used to create a higher concentration of ultraviolet light. This process, however, also produces many other wavelengths of light which go unused and end up as wasted energy. LED lights are unique in that they have a narrower wavelength band than traditional ultraviolet sources and therefore do not require these special coatings. As a result, LED lights do not produce unused, wasted light and therefore consume less energy than traditional UV lights on the market. LED lights have the added benefit of being capable of producing very specific wavelengths with tighter curves and are more durable and light weight as well. This eliminates harmful UV-B and UV-C wavelengths from being emitted from the light source, adding in productivity and safety during operation.\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\nLED Drivers: Even in LED fixtures, heat is the single largest factor in premature light failure and color shifting. As a result, many manufacturers reduce the output of their LEDs in order to reduce the amount of heat produced. Rather than lower light output or quality, Larson Electronics addresses this problem with the addition of an electronic LED driver. This internal driver provides the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. This not only reduces the energy dissipation, effectively lowering the operating temperature of the fixture, but also prevents AC over-voltage and short circuit loading making this fixture virtually maintenance free. Because the electronic driver allows the EPL-HB-30LED-RT-UVA to run at a cooler internal temperature and regulates the electrical current, energy efficiency and LED service hours are maximized while at the same time reducing operating costs and downtime incurred from the frequent servicing intervals required with other hotter running lights.\nThis light is universal voltage capable and can be operated with 100-277 VAC, 50\/60Hz. We also offer a low voltage version of this LED fixture that operates on AC\/DC voltages from 11-25 Volts. This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics.\nWiring: The EPL-HB-30LED-RT-UVA explosion proof high bay LED light fixture is equipped with 10 feet of abrasion and chemical resistant 16\/3 SOOW cable with flying leads. The LED light fixture features 5 3\/4\" NPT threaded ports for running conduit depending on the installation location. Four of the ports are located on the corners of the unit and the fifth port is found on the rear of the explosion proof high bay LED fixture.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr align=\"center\"\u003e\n\u003ctd\u003eEnergy Consumption Comparison\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eMetal Halide\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eWattage\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e175 watts\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e30 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 120V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.69 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.25 amps\u003c\/td\u003e\n \u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 220V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.92 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.18 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 240V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.85 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.13 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 277V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.73 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e0.11 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 12V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e16.77 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e2.5 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 24V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e8.39 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1.25 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eLamp Life Expectancy\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e20,000 hours\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e60,000+ hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eOperation cost per year\n(12hs\/day @ 12c\/kWh)\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$241.78\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$15.77\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\" colspan=\"3\"\u003eEach LED light fixture has the potential to save $150.00+ per year in electricity alone, not including maintenance costs, operational downtime, reduced productivity, HVAC loads, or carbon footprint. When retrofitting an entire facility with 100s of light fixtures, the return on investment of LED over metal halide becomes evident.\u003c\/td\u003e\n\u003c\/tr\u003e\n \n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38267567538357,"sku":"PL3-EPL-HB-30LED-RT-UVA","price":5526.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-HB-30LED-RT-UVA.jpg?v=1628397582"},{"product_id":"pl3-epl-hb-3x150led-rt-140db-480v","title":"480V Class 1 Division 1 Explosion Proof 450 Watt High Bay LED Light Fixture -140°- Paint Spray Booth","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eEPL-HB-3X150LED-RT-140DB-480V High Bay LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: Cree LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass 1 Division 1, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 42\"L x 16\"W 5\"H\u003c\/td\u003e\n\u003ctd\u003eClass 1 Division 2, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 450W\u003c\/td\u003e\n\u003ctd\u003eClass 2, Divisions 1 \u0026amp; 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 52,500 \u003c\/td\u003e\n\u003ctd\u003eClass 3, Divisions 1 \u0026amp; 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficiency: 116.67 Lm\/w \u003c\/td\u003e\n\u003ctd\u003eT5 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 347-480V AC\u003c\/td\u003e\n\u003ctd\u003eCertified to UL844 and C22.2 Standards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: 3\/4€ Pendant and Swivel Mount are both included with this fixture.\u003c\/td\u003e\n\u003ctd\u003ePaint Spray Booth Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 101lbs\u003c\/td\u003e\n\u003ctd\u003eLEL Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle: 140° \u003c\/td\u003e\n\u003ctd\u003eIP67 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003eMultiple Driver Banks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp Rating: T5 -50C to +65C\u003c\/td\u003e\n\u003ctd\u003e80% Lumen Retention after 60,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 5000K, 4000K, 3000K\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: \u0026gt;75 CRI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 60,000+ Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA \nThe Larson Electronics EPL-HB-3X150LED-RT-140DB-480V 450 Watt Explosion Proof High Bay light fixture provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older fixtures. \n***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*** \nThis Class 1 Division 1 \u0026amp; 2, Class 2 Division 1 \u0026amp; 2 explosion proof light fixture provides 52,500 lumens of high quality light while drawing only 450 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.\nThis explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. The EPL-HB-3X150LED-RT-140DB-480V explosion proof high bay LED fixture contains thirty-six individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.\nUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.\n\u003ctable width=\"553\" border=\"1\"\u003e\n\n\u003ctr\u003e\n\u003ctd colspan=\"3\"\u003eClick Photos to Enlarge \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003e60° Beam Angle \u003c\/td\u003e\n\u003ctd\u003e125° Beam Angle Plug \u003c\/td\u003e\n\u003ctd\u003e140° Beam Angle Plug \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nBeam Angles: When used as a fixed mount fixture, the varying beam angles need to be mounted at certain heights in order to achieve the greatest coverage and efficiency in both high bay and low bay lighting situations. The 60° beam should be mounted in high bay fixtures over 25` in height and 25` away from objects if used as a wall mounted light. The 125° beam is ideal for low bay fixtures in a height range of 15-25 feet and the same distance away from objects when the wall mounting option is employed. The 140° beam is best used as a low bay fixture in areas with a ceiling height of 15` or less or for illuminating objects up to 15` away when wall mounted.\nThis light is universal voltage capable and can be operated with 347-480 VAC without modifications. 347V is common in Western Canada, while 480V is common in the United States and Eastern Canada. This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics. \nThis LED light produces 52,500 lumens with a color temperature of 5000K, 4000K, or 3000K and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. The EPL-HB-3X150LED-RT-140DB-480V offers several mounting options including ceiling mounting, pendant mounting, wall mounting and cable mounting. The standard version of this explosion proof LED fixture includes a pendant mount and a surface mount option. \n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eHigh Quality Features\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 212px;\"\u003e\n1. Low power consumption.\n2. Instant on\/off operation.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. Superior color rendering compared to HPS, LPS, MH.\n5. Retains 80% lumen output after 60,000 operating hours.\n6. Powder coated aluminum fixture body. \n7. Pendant and Swivel Bracket mount included\n8. Low profile - Light weight\n9. 52,500 Lumen output from only 450 watts\n\u003c\/td\u003e\n\u003ctd\u003e\n1. 60,000 hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off €“ No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38267576058037,"sku":"PL3-EPL-HB-3X150LED-RT-140DB-480V","price":14332.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-HB-3X150LED-RT-140DB-480V.jpg?v=1628397652"},{"product_id":"pl3-eplc-48-4l-led-g2","title":"Explosion Proof LED Lights on Cart w\/ Wheels -2nd Gen - 4' 4 LED lamps - Paint Spray Booth Certified","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eEPLC-48-4L-LED Explosion Proof\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eU.L. Ratings\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eUL Listing: United States - Canada\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass 1 Division 1, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: W-30 \" L-58 \" H-35.5 \"\u003c\/td\u003e\n\u003ctd\u003eClass 1 Division 2, Group A,B,C,D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Unit Weight: 115 Lbs \u003c\/td\u003e\n\u003ctd\u003eUL 595 Outdoor Marine Type (Saltwater)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 112 watts\u003c\/td\u003e\n\u003ctd\u003eUL 844, 924\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 120V-60hz 220V-50hz 240V-60hz 277V-60hz: low voltage available, 12 or 24 volts dc.\u003c\/td\u003e\n\u003ctd\u003eUL 1598 Marine Type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: Led-T series Bulbs 11,000\u003c\/td\u003e\n\u003ctd\u003eClass II Division 1- 2, Groups E,F,G \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life Expectancy: Led-T series Bulbs 50,000+ Hours\u003c\/td\u003e\n\u003ctd\u003eUL Certified Canadian Standards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficiency: Led-T series Bulbs 98.21 Lumens per Watt\u003c\/td\u003e\n\u003ctd\u003eUL listed for Paint Spray Booths*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eTemp Range: T6 Rated* -40C - 85C \u003c\/td\u003e\n\u003ctd\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eBeam Angle: 150 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMinimum Operating Temp: -30 C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMaximum Case Temp: 90 C\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eColor Temp: 5600K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting: Portable Cart with Adjustable Brackets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWiring: 50ft SOOW cord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 21px;\"\u003e\nU.L Approval:  \n\u003c\/td\u003e\n\u003ctd\u003e\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in Texas\n*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS LIGHT CART*\nThe Larson Electronics EPLC-48-4L-LED-G2 Explosion Proof LED Light Cart is U.S.\/Canada UL Listed Class 1 Division 1, Class 2 Division 1 and offers exceptional LED lamp durability, efficiency, 50,000 hour lamp life, and versatile explosion proof protection for operators working in hazardous locations.\n\nThe EPLC-48-4L-LED-G2 explosion proof light cart is UL listed Class 1 Division 1 and Class 2 Division 1 \u0026amp; 2 and offers the ability to quickly and easily add light wherever it is needed. This unit incorporates the highly effective Larson Electronics  equipped with four 28 Watt LED T-series tube lights into a mobile platform. The platform is constructed of corrosion resistant aluminum alloy, has non sparking casters, and includes a Class 1 Div 1 Explosion Proof Switch with 50 foot of SOOW electric cable as well. This T6 temperature rated explosion proof LED light cart offers superior LED benefits in the form of reduced operating and maintenance costs, extreme lamp life, and high resistance to impacts and vibration. \nThis unit is an excellent lighting solution for operators who need full power illumination in areas where traditional fixed mount lighting is obstructed or cannot effectively reach. \n\n\u003ctable height=\"163\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%; height: 113px;\"\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 31%;\"\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 36%;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 21px;\"\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 21px;\"\u003e\n\u003cdiv style=\"text-align: center;\"\u003eClick Photos to Enlarge\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv style=\"text-align: center;\"\u003eClick Photos to Enlarge\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv style=\"text-align: center;\"\u003eClick Photos to Enlarge\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nThere is no ballast in this unit and the included LED T-series lamps have a 50,000+ hour service life, both of which result in extreme efficiency, cooler operation and greatly reduced maintenance costs. The solid state design of the LED lamps give this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T8 bulbs. The lamps are protected by heat and impact resistant Pyrex tubes which provide added security against impacts and overspray. The light fixture is constructed of copper free aluminum alloy and the entire unit ships with a 50` SOOW cord and explosion proof plug. The lamp reflectors are corrosion resistant heavy gauge aluminum and coated with a high gloss 93% reflective finish. The cart allows the entire fixture to be adjusted through 270 degrees of rotation to position the lights as needed. \nThese LED-T series 28 watt LED lamps produce 30% more illumination per watt than standardT8 bulbs. The EPLC-48-4L-LED-G2 is multi-voltage (not multi-tap) and works on the following voltages: 120 Volt 60 HZ, 220 Volt 50 HZ, 240 Volt 60 HZ, 277 Volts 60 HZ. The unit is also offered in low voltage to accommodate those who need voltage on 12 and 24 volts dc.An explosion proof switch comes standard with the EPLC-48-4L-LED, allowing for simple turning on\/off while in a hazardous area. \nSuggested Applications: PAINT SPRAY BOOTHS, Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Gas processing plants, Chemical manufacturing, Waste treatment plants, Gas processing plants. \n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eMade in USA Quality\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 284px;\"\u003e\n1. Each unit dialectically tested.\n2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets allow the light fixture to be rotated while on the cart through a wide degree of positions for optimal light placement.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. No ballast box. No ballast to replace. We simply run the black wire to one end of the bulb and white wire to the other.\n5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.\n6. A wrench is used to unscrew the end caps for relamping the fixture, while other models require the “tap and knock off” method to loosen the end cap.\n7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp protection.\n8. Spring loaded sockets on both ends hold lamps firmly for maximum shock and vibration protection.\n\n\u003c\/td\u003e\n\u003ctd\u003e\n1. Extreme long life.\n2. High efficiency and low amp draw.\n3. High durability and reliability.\n4. Small size and light weight.\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. High light output..\n8. Consistent color over time.\n9. High Versatility.\n10. No fragile glass used in construction. \n12. Vibration\/impact resistant.\n\nCart Features:\n5” non sparking casters\nFrame constructed of corrosion resistant aluminum\nAdjustable fixture brackets to 270 degrees\n50 footSOOW electric cable\nClass I, Div I Explosion Proof Switch \n\n\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 440px;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38267587035317,"sku":"PL3-EPLC-48-4L-LED-G2","price":14018.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPLC-48-4L-LED-G2.jpg?v=1628372511"},{"product_id":"pl3-epluc-48-4l-led-480v","title":"Explosion Proof LED Lights for Paint Booths on Aluminum Upright Cart with Wheels - 480V","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eEPLUC-48-4L-LED-480V Explosion Proof\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eU.L. Ratings\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eListing: United States - Canada\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass 1 Division 1, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 24\"-W x 58\"-L x 25.5\"-H\u003c\/td\u003e\n\u003ctd\u003eClass 1 Division 2, Group A,B,C,D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Unit Weight: 180 Lbs\u003c\/td\u003e\n\u003ctd\u003eUL 595 Outdoor Marine Type (Saltwater)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts:  112 watts\u003c\/td\u003e\n\u003ctd\u003eUL 844\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 13,440\u003c\/td\u003e\n\u003ctd\u003eUL 1598 Marine Type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: Universal Voltage 347-480V AC\u003c\/td\u003e\n\u003ctd\u003eClass2, Division 1 - 2, Groups E,F,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life Expectancy:  50,000 Hours\u003c\/td\u003e\n\u003ctd\u003eUL Certified Canadian Standards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficiency: 120 Lumens per Watt\u003c\/td\u003e\n\u003ctd\u003eUL listed for Paint Spray Booths\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range:-30° C to +85°C\u003c\/td\u003e\n\u003ctd\u003eCalifornia Title 24 Compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eOperating Temp Rating: T6 Rated\u003c\/td\u003e\n\u003ctd\u003eIP67 Rated - Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMinimum Operating Temp: -30°C\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMaximum Case Temp: +90°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eBeam Angle: 150°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eColor Temp: 5600K or 4100K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting: Portable Upright Aluminum Cart with Adjustable Brackets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: 50 Feet SOOW Cord w\/ Inline On\/Off Switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty: YES- 5 Years*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA\nThe Larson Electronics EPLUC-48-4L-LED-480V Upright Explosion Proof LED Light Cart is U.S.\/Canada UL Listed Class 1 Division 1, Class 2 Division 1 and offers exceptional lighting versatility and convenience with effective protection to operators working in hazardous locations with 347-480V AC power sources. Solid rubber tires, unidirectional caster wheels, and a fold down handle gives this light excellent mobility and versatility and makes it an ideal choice for operators who need an effective and safe lighting solution that can be easily applied over a wide variety of applications.\nThe EPLUC-48-4L-LED-480V aluminum upright explosion proof cart is UL listed Class 1 Division 1 and Class 2 Division 1 \u0026amp; 2 and offers the ability to quickly and easily add light wherever it is needed without the need for special considerations of hazardous conditions beyond adhering to the normal rules of ratings and classifications. This unit incorporates a pair of our highly effective  equipped with four LED tube lamps into a mobile cart platform equipped with wheels. The EPLUC-48-4L-LED-480V is equipped with specially designed LED T-series bulbs which produce 30% more light than standard T8 bulbs. The platform is constructed of corrosion resistant aluminum alloy, has non sparking casters, and includes a Class 1 Div 1 explosion proof switch with 50 foot of SOOW cable and terminated in an explosion proof 4-pole, 3-wire pin and sleeve cord cap. \n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 119px;\"\u003e\n\u003ctable height=\"140\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%; height: 113px;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 31%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 36%;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 21px;\"\u003eClick to Enlarge \u003c\/td\u003e\n\u003ctd\u003eClick to Enlarge \u003c\/td\u003e\n\u003ctd\u003eClick to Enlarge \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 119px;\"\u003e\n\u003ctable height=\"140\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%; height: 113px;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 31%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 36%;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 21px;\"\u003eClick to Enlarge \u003c\/td\u003e\n\u003ctd\u003eClick to Enlarge \u003c\/td\u003e\n\u003ctd\u003eClick to Enlarge \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\nThis upright explosion proof aluminum cart offers an excellent lighting solution for operators who need full power illumination in areas where traditional fixed mount lighting is obstructed or cannot effectively reach. The cart is highly versatile and gives the operator the ability to easily move the entire assembly around the work space simply by leaning the cart back and rolling it into position. Also included is a fold down handle and unidirectional caster wheels that allows operators to lay the unit flat and wheel it into hard to reach areas such as underneath vehicles in paint spray booths. Maintenance is further simplified with interchangeable screw on end caps and O ring seals which allows all relamping to be done from one end of the fixture. \nThe light fixtures used in the EPLUC-48-4L-LED-480V are T6 temperature rated and paint booth certified, and produce a combined total 13,440 lumens of light using four tube style LED bulbs. The lamps are protected by heat and impact resistant Pyrex tubes and heavy wire grates, and the fixtures are constructed of copper free aluminum alloy. The lamp reflectors are corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. Included with this cart is 50 feet of chemical and abrasion resistant cord, explosion proof plug, and an explosion proof inline switch which allows operators to safely control light operation within the hazardous area without the need for inconvenient plugging and unplugging of the fixture.\nThis light cart is universal voltage, not multi-tap, and operates on any voltage from 347V to 480V AC without any modifications. We also make a 120-277V AC 50\/60Hz for standard high voltage applications, and 12\/24V AC\/DC version for low voltage applications for AC or DC power. The entire cart and fixture unit is UL Listed for use in paint spray booths and U.L. 1598 -U.L. 595 compliant for wet area and marine use. The cart allows the entire fixture to be easily wheeled into position as needed, and can be laid flat for sliding the cart under vehicles or into hard to reach areas.\nNote: The light fixture used in this cart is compatible with the usual options associated with the EPLUC-48-4L-LED-480V fixture including optional higher power fluorescent tubes. For special requirements or options not listed here contact us using the information below.\nSuggested Applications: Paint spray booths, Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Chemical manufacturing, Waste treatment plants, Gas processing plants.\n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eMade in USA Quality\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 280px;\"\u003e\n1. Each unit dialectically tested.\n2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets allow the light fixture to be rotated while on the cart through a wide degree of positions for optimal light placement.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. Over-sized, finned ballast housing for 800 mA fixtures provides more heat dissipation and extends ballast life. Larger ballast box accommodates High Output lamp ballasts. Ballast housing easily accessible and externally mounted. Top and bottom covers secured with nuts and bolts, instead of threaded through holes, which can be damaged with dirt.\n5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.\n6. A wrench is used to unscrew the end caps for relamping the fixture, while other models require the “tap and knock off” method to loosen the end cap.\n7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp protection.\n8. Spring loaded sockets on both ends hold lamps firmly for maximum shock and vibration protection.\n\u003c\/td\u003e\n\u003ctd\u003e\n1. 50,000 hour lifespan.\n2. Can SAVE 50% or more on energy.\n 3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LEED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off – No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38267587068085,"sku":"PL3-EPLUC-48-4L-LED-480V","price":13678.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPLUC-48-4L-LED-480V.jpg?v=1628372504"},{"product_id":"pl3-eplc-48-4l-led","title":"Explosion Proof LED Lights on Cart w\/ Wheels - 4 foot, 4 LED lamps - Paint Spray Booth Certified","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eEPLC-48-4L-LED Explosion Proof\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eU.L. Ratings\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eUL Listing: United States - Canada\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass 1 Division 1, Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: W-30 \"  L-58 \"   H-35.5 \"\u003c\/td\u003e\n\u003ctd\u003eClass 1 Division 2, Group A,B,C,D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Unit Weight: 115 Lbs \u003c\/td\u003e\n\u003ctd\u003eUL 595 Outdoor Marine Type (Saltwater)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 96 watts\u003c\/td\u003e\n\u003ctd\u003eUL 844, 924\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 120V-60hz  220V-50hz  240V-60hz  277V-60hz: low voltage available, 12 or 24 volts dc. \u003c\/td\u003e\n\u003ctd\u003eUL 1598 Marine Type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n \u003ctd\u003eTotal Lumens: Led-T series Bulbs 14,000\u003c\/td\u003e\n\u003ctd\u003eClass II Division 1- 2, Groups E,F,G \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life Expectancy: Led-T series Bulbs 50,000+ Hours\u003c\/td\u003e\n\u003ctd\u003eUL Certified Canadian Standards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficiency: Led-T series Bulbs 90 Lumens per Watt\u003c\/td\u003e\n\u003ctd\u003eUL listed for Paint Spray Booths*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eTemp Range: T6 Rated* -40C - 85C\u003c\/td\u003e\n\u003ctd\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eBeam Angle: 150 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMinimum Operating Temp: -30 C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMaximum Case Temp: 90 C\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eColor Temp: 5300K- \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting: Portable Cart with Adjustable Brackets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWiring: 50ft SOOW cord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 40px;\"\u003e\nU.L Approval:   \n\u003c\/td\u003e\n\u003ctd\u003e\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA\n*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS LIGHT CART*\nThe Larson Electronics EPLC-48-4L-LED Explosion Proof LED Light Cart is U.S.\/Canada UL Listed Class 1 Division 1, Class 2 Division 1 and offers exceptional LED lamp durability, efficiency, 50,000 hour lamp life, and versatile explosion proof protection for operators working in hazardous locations. \nThe EPLC-48-4L-LED explosion proof light cart is UL listed Class 1 Division 1 and Class 2 Division 1 \u0026amp; 2 and offers the ability to quickly and easily add light wherever it is needed. This unit incorporates our highly effective EPL-48-4L-LED explosion proof fixture equipped with four 24 Watt LED T-series tube lights into a mobile platform. The platform is constructed of corrosion resistant aluminum alloy, has non sparking casters, and includes a Class 1 Div 1 Explosion Proof Switch with 50 foot of SOOW electric cable as well. This T6 temperature rated explosion proof LED light cart offers superior LED benefits in the form of reduced operating and maintenance costs, extreme lamp life, and high resistance to impacts and vibration. \n\nThis unit is an excellent lighting solution for operators who need full power illumination in areas where traditional fixed mount lighting is obstructed or cannot effectively reach. \n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 119px;\"\u003e\n\u003ctable height=\"163\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%; height: 113px;\"\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 31%;\"\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 36%;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 21px;\"\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 21px;\"\u003e\n\u003cdiv style=\"text-align: center;\"\u003eClick Photos to Enlarge\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv style=\"text-align: center;\"\u003eClick Photos to Enlarge\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv style=\"text-align: center;\"\u003eClick Photos to Enlarge\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 420px;\"\u003e\nThere is no ballast in this unit and the included LED T-series lamps have a 50,000+ hour service life, both of which result in extreme efficiency, cooler operation and greatly reduced maintenance costs. The solid state design of the LED lamps give this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T8 bulbs. The lamps are protected by heat and impact resistant Pyrex tubes which provide added security against impacts and overspray. The light fixture is constructed of copper free aluminum alloy and the entire unit ships with a 50` SOOW cord and explosion proof plug. The lamp reflectors are corrosion resistant heavy gauge aluminum and coated with a high gloss 93% reflective finish. The cart allows the entire fixture to be adjusted through 270 degrees of rotation to position the lights as needed. \nThese LED-T series 24 watt LED lamps produce more illumination per watt than standard T8 bulbs, but draw only 3\/4 of current. A standard EPL-48-4L-T8 explosion proof fluorescent light, with a combined total of 128 watts, draws 1.07 amps @ 120 volts. The LED version of the same light, with a total of 96 watts, draws only 0.9 amps. The EPLC-48-4L-LED is multi-voltage (not multi-tap) and works on the following voltages: 120 Volt 60 HZ, 220 Volt 50 HZ, 240 Volt 60 HZ, 277 Volts 60 HZ. The unit is also offered in low voltage to accommodate those who need voltage on 12 and 24 volts dc. An explosion proof switch comes standard with the EPLC-48-4L-LED, allowing for simple turning on\/off while in a hazardous area. \nSuggested Applications: PAINT SPRAY BOOTHS, Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Gas processing plants, Chemical manufacturing, Waste treatment plants, Gas processing plants. \n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eMade in USA Quality\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n1. Each unit dialectically tested.\n2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets allow the light fixture to be rotated while on the cart through a wide degree of positions for optimal light placement.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. No ballast box. No ballast to replace. We simply run the black wire to one end of the bulb and white wire to the other.\n5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.\n6. A wrench is used to unscrew the end caps for relamping the fixture, while other models require the “tap and knock off” method to loosen the end cap.\n7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp protection.\n8. Spring loaded sockets on both ends hold lamps firmly for maximum shock and vibration protection.\n\u003c\/td\u003e\n\u003ctd\u003e\n1. Extreme long life.\n2. High efficiency and low amp draw.\n3. High durability and reliability.\n4. Small size and light weight.\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. High light output..\n8. Consistent color over time.\n9. High Versatility.\n10. No fragile glass used in construction. \n12. Vibration\/impact resistant.\n\nCart Features:\n5” non sparking casters\nFrame constructed of corrosion resistant aluminum\nAdjustable fixture brackets to 270 degrees\n50 foot SOOW electric cable\nClass I, Div I Explosion Proof Switch \n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 440px;\"\u003e\n \n \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38267587362997,"sku":"PL3-EPLC-48-4L-LED","price":12790.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPLC-48-4L-LED.jpg?v=1628372517"},{"product_id":"pl3-epl-24-2l-led-50-ep","title":"Larson Explosion Proof Paint Spray Booth LED Lighting - 2 Foot, 2 Lamp Fixture - 50' Cord Pin + Sleeve Plug","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003eMade in Texas\r\u003cbr\u003eThe Larson Electronics EPL-24-2L-LED-50-EP Explosion Proof LED Light Fixture is NRTL Listed for United States and Canada Class 1 Division 1, Class 2 Division 1, has a T6 temperature rating, and is a superior lighting solution for areas where flammable chemical\/petrochemical vapors or pulverized dust exist or have the potential to exist.\r\u003cbr\u003eThis 2 foot long, 2 LED tube, explosion proof light fixture is ideal for use in locations requiring powerful yet compact hazardous location lighting that will improve overall illumination levels and light quality while reducing operating costs.\r\u003cbr\u003eThe EPL-24-2L-LED-50-EP is equipped with our specially designed LED T-series bulbs which produce 15% more illumination at 8 feet as compared to standard T8 lamps when measured with an Extech light meter. Our LED-T series bulbs are visibly brighter than standard T8s and have consistently surprised many of our customers with their unexpectedly high light output levels. This 2 LED bulb explosion proof fixture is lighter in weight, has a slimmer profile, and produces more light than traditional explosion proof fluorescent fixtures. The 2 foot long F17 LED tube design bulbs included with this unit are rated at 50,000+ hours of service life, which is nearly twice as long as T5 bulbs.\r\u003cbr\u003eThis fixture is equipped with a 50 foot SOOW cord and terminated in an explosion proof pin and sleeve Arktite Plug. This fixture carries a T6 temperature rating and is Class 1 Division 1, Groups C and D, Class 1 Division 2, Group A,B,C and D, and Class 2, Division 1 and 2, Groups E, F and G.\r\u003cbr\u003eWe have eliminated the ballast box normally associated with fluorescent fixtures which reduces overall weight, creates a slimmer unit profile, and helps this LED fixture maintain a T-6 temperature rating. The solid state design of the LED lamps give this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T8 bulbs. The 15 watt LED lamps produce more illumination than standard T5 bulbs. The LED bulbs used in this fixture are our new second generation LED T series 15 watt T17 style lamps which produce 15% more light than standard T8 bulbs when measured from eight feet. This fixture is multi-voltage capable (not multi-tap) and works on the following voltages: 120 Volt 60 HZ, 220 Volt 50 HZ, 240 Volt 60 HZ, 277 Volts 60 HZ. We also make a 12-24V DC version for low voltage applications (-LV suffix). Our EPL-24-2L-LED LED light fixture is NRTL Listed U.S. and Canada for use in paint spray booths.\r\u003cbr\u003eMounting Options:\r\u003cbr\u003eSurface Mount (Standard)\r\u003cbr\u003eAdjustable Surface Mount Brackets:\r\u003cbr\u003eEach bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg.\r\u003cbr\u003ePendant Mount (Optional)\r\u003cbr\u003e3 Conduit Positions\r\u003cbr\u003e\u003cstrong\u003eSuspension Mounting:\u003c\/strong\u003e\r\u003cbr\u003ePendant mount fixtures hang from the ceiling and are suspended by rigid pipe. Each fixture features a 1\/2” NPT junction box on one end, and a 1\/2” NPT adjustable L-bracket on the other end of the fixture. Operators bring rigid pipe down to the threaded mounting hubs. Wiring is fed down through the rigid pipe to the junction box and tied in to the fixture’s lead wires, completing the electrical connection. The adjustable L-shape mounting bracket provides support for the opposite end of the fixture.\r\u003cbr\u003e\u003cstrong\u003eSuggested \u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/strong\u003e\r\u003cbr\u003ePaint spray booths, Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Gas processing plants, Chemical manufacturing, Waste treatment plants, Gas processing plants.\r\u003cbr\u003eMade in USA Quality\r\u003cbr\u003eSuperior LED Benefits\r\u003cbr\u003e1. Each unit dialectrically tested.\r\u003cbr\u003e1. 50,000 hour lifespan.\r.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eNRTL Listed for United States \u0026amp; Canada\u003cbr\u003eUnited States \u0026amp; Canada NRTL Listed for \u003cbr\u003eDimensions:  W-11.25\"  L-27.5\"  H-8.5 \"\u003cbr\u003eWeight:  32 Lbs \u003cbr\u003eTotal Watts: 30 watts \u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e  Multi- 120V-60hz  220V-50hz  240V-60hz  277V-60hz\u003cbr\u003eLow Voltage (Optional):  12-24V DC\u003cbr\u003eLED Lamp Life Expectancy:  50,000+ Hours\u003cbr\u003eEfficiency:  90 Lumens per Watt\u003cbr\u003eAmbient Operating Temp Range:- 30 C to 85 C\u003cbr\u003eBeam Angle:  150 degrees\u003cbr\u003eColor Temp:  5300K- \u003cbr\u003eMounting:  Bracket Standard - Pendant Optional\u003cbr\u003eWiring:  50` SOOW cable - CPP516 Pin and Sleeve Plug\u003cbr\u003eOperating Temp Rating: T6 Rated\u003cbr\u003eMinimum Operating Temp:  -30 C\r\u003cbr\u003e            \u003cbr\u003eMaximum Case Temp: 90 C\r\u003cbr\u003e            \u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38267587428533,"sku":"PL3-EPL-24-2L-LED-50-EP","price":3474.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-24-2L-LED-50-EP-1.jpg?v=1610917603"},{"product_id":"pl3-epl-24-2l-led-lv","title":"Larson Explosion Proof Paint Spray Booth LED Light - 2 Foot 2 Lamp Fixture - Class 1, Div. 1 - Low Voltage","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003eMade in the USA\r\u003cbr\u003eThe Larson Electronics EPL-24-2L-LED-LV Explosion Proof LED Light Fixture is NRTL Listed for United States and Canada Class 1 Division 1, Class 2 Division 1, has a T6 temperature rating and is a superior lighting solution for areas where flammable chemical\/petrochemical vapors or pulverized dust exist or have the potential to exist.\r\u003cbr\u003eThis 2 foot long, 2 LED tube, explosion proof light fixture is ideal for use in locations requiring powerful yet compact hazardous location lighting that will improve overall illumination levels and light quality while reducing operating costs.\r\u003cbr\u003eThe EPL-24-2L-LED-LV is equipped with specially designed LED T-series bulbs which produce 15% more illumination at 8 feet as compared to standard T8\r\u003cbr\u003elamps when measured with an Extech light meter. Our LED-T series bulbs are visibly brighter than standard T8 and have consistently surprised many of our customers with their unexpectedly high light output levels. This 2 LED bulb explosion proof fixture is lighter in weight, has a slimmer profile, and produces more light than traditional explosion proof fluorescent fixtures. The 2 foot long F17 LED tube design bulbs included with this unit are rated at 50,000+ hours of service life, which is nearly twice as long as T8 bulbs.\r\u003cbr\u003eThis fixture carries a T6 temperature rating and is Class 1 Division 1, Groups C and D, Class 1 Division 2, Group A,B,C and D, and Class II, Division 1 and 2, Groups E, F and G.\r\u003cbr\u003eWe have eliminated the ballast box normally associated with fluorescent fixtures which reduces overall weight, creates a slimmer unit profile, and helps this LED fixture maintain a T-6 temperature rating. The solid state design of the LED lamps give this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T8 bulbs. The 15 watt LED lamps produce more illumination than standard T8 bulbs. The LED bulbs used in this fixture are our new second generation LED T series 15 watt T17 style lamps which produce 15% more light than standard T8 bulbs when measured from eight feet. This fixture is multi-voltage capable (not multi-tap) and works on low voltage \u003cstrong\u003eApplications:\u003c\/strong\u003e 12-24V DC. Our EPL-24-2L-LED-LV LED light fixture is NRTL United States and Canada for use in paint spray booths.\r\u003cbr\u003eMounting Options:\r\u003cbr\u003eSurface Mount (Standard)\r\u003cbr\u003eAdjustable Surface Mount Brackets:\r\u003cbr\u003eEach bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg.\r\u003cbr\u003ePendant Mount (Optional)\r\u003cbr\u003e3 Conduit Positions\r\u003cbr\u003e\u003cstrong\u003eSuspension Mounting:\u003c\/strong\u003e\r\u003cbr\u003ePendant mount fixtures hang from the ceiling and are suspended by rigid pipe. Each fixture features a 1\/2” NPT junction box on one end, and a 1\/2” NPT adjustable L-bracket on the other end of the fixture. Operators bring rigid pipe down to the threaded mounting hubs. Wiring is fed down through the rigid pipe to the junction box and tied in to the fixture’s lead wires, completing the electrical connection. The adjustable L-shape mounting bracket provides support for the opposite end of the fixture.\r\u003cbr\u003e\u003cstrong\u003eSuggested \u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/strong\u003e\r\u003cbr\u003ePaint spray booths, Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Gas processing plants, Chemical manufacturing, Waste treatment plants, Gas processing plants.\r\u003cbr\u003eMade in USA Quality\r\u003cbr\u003eSuperior LED Benefits\r\u003cbr\u003e1. Each unit dialectrically tested.\r\u003cbr\u003e1. 50,000 hour lifespan.\r.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eNRTL Listed for United States \u0026amp; Canada\u003cbr\u003eUnited States \u0026amp; Canada NRTL Listed for \u003cbr\u003eDimensions:  W-11.25\"  L-27.5\"  H-8.5 \"\u003cbr\u003eWeight:  32 Lbs \u003cbr\u003eTotal Watts: 30 watts \u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e  12-24 Volts DC\u003cbr\u003eStandard Voltage (Optional):  120-277 VAC\u003cbr\u003eLED Lamp Life Expectancy:  50,000+ Hours\u003cbr\u003eEfficiency:  90 Lumens per Watt\u003cbr\u003eAmbient Operating Temp Range:- 30 C to 85 C\u003cbr\u003eBeam Angle:  150 degrees\u003cbr\u003eColor Temp:  5300K- \u003cbr\u003eMounting:  Bracket Standard - Pendant Optional\u003cbr\u003eWiring Hub:  1\/2 inch threaded\u003cbr\u003eOperating Temp Rating: T6 Rated\u003cbr\u003eMinimum Operating Temp:  -30 C\r\u003cbr\u003e            \u003cbr\u003eMaximum Case Temp: 90 C\r\u003cbr\u003e            \u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38267588313269,"sku":"PL3-EPL-24-2L-LED-LV","price":2480.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-24-2L-LED-LV-1.jpg?v=1610917605"}],"url":"https:\/\/getcahits.com\/collections\/safety-boots.oembed","provider":"PuriLite","version":"1.0","type":"link"}